Sandwich-like Catalyst–Carbon–Catalyst Trilayer Structure as a Compact 2D Host for Highly Stable Lithium–Sulfur Batteries

Herein, we propose the construction of a sandwich-structured host filled with continuous 2D catalysis–conduction interfaces. This MoN-C-MoN trilayer architecture causes the strong conformal adsorption of S/Li₂S_x and its high-efficiency conversion on the two-sided nitride polar surfaces, which are supplied with high-flux electron transfer from the buried carbon interlayer. The 3D self-assembly of these 2D sandwich structures further reinforces the interconnection of conductive and catalytic networks. The maximized exposure of adsorptive/catalytic planes endows the MoN-C@S electrode with excellent cycling stability and high rate performance even under high S loading and low host surface area. The high conductivity of this trilayer texture does not compromise the capacity retention after the S content is increased. Such a job-synergistic mode between catalytic and conductive functions guarantees the homogeneous deposition of S/Li₂S_x, and avoids thick and devitalized accumulation (electrode passivation) even after high-rate and long-term cycling.     

煤直接液化油中混合酚的分离研究

利用分子筛择形特点，对煤直接液化油中的混合酚实施高效分离。本研究选取间甲酚和对甲酚作为分离煤直接液化油馏分段混合酚的模型化合物，采用化学液相沉积法对HZSM-5吸附剂的孔口结构进行改变，分析分子筛硅铝比及颗粒粒径对模型化合物间甲酚和对甲酚吸附分离性能的影响，以获得高性能固相吸附剂，并将其应用于180-190℃馏分段混合酚分离。结果表明，当分子筛硅铝比为25、粒径为3-5 μm时，分子筛的孔口结构调节效果最优；当正硅酸乙酯的最小用量为0.2 mL/g时，固相吸附剂的吸附量为0.03 g/g，对甲酚选择性高于95%。由于外表面沉积物对吸附剂的孔口结构变化，导致对甲酚选择性的提高。进一步采用HZSM-5（1）吸附剂对真实煤直接液化油混合酚的分离中发现，苯酚和对甲酚的选择性均达到100%。     

The Berry–Esseen bounds of the weighted estimator in a nonparametric regression model

Consider the following nonparametric model: \(Y_{ni}=g(x_{ni})+ \varepsilon _{ni},1\le i\le n,\) where \(x_{ni}\in {\mathbb {A}}\) are the nonrandom design points and \({\mathbb {A}}\) is a compact set of \({\mathbb {R}}^{m}\) for some \(m\ge 1\), \(g(\cdot )\) is a real valued function defined on \({\mathbb {A}}\), and \(\varepsilon _{n1},\ldots ,\varepsilon _{nn}\) are \(\rho ^{-}\)-mixing random errors with zero mean and finite variance. We obtain the Berry–Esseen bounds of the weighted estimator of \(g(\cdot )\). The rate can achieve nearly \(O(n^{-1/4})\) when the moment condition is appropriate. Moreover, we carry out some simulations to verify the validity of our results.

     

催化动力学光度法测定水中痕量铁

本文研究了ｐｈ５．０的ＨＡｃ－ＮａＡｃ介质中，痕量铁催化过氧化氢氧化紫脲酸的褪色反应，建立了催化动力学光度法测定痕量铁的新方法，方法的线性范围０－０．４０，０．４０－２．０μｇ／２５ｍＬ，检出限为８×１０＾－１１ｇ／ｍＬ，用于水样中痕量铁的测定，结果满意。     

置换模,ρ置换模与Conlon比析

本文对特征P的基域F引入适当的Galois群T,讨论p置换模的Green环的Conlon比析在Galois群T作用下的动态,证明了在T作用下p置换模的Green环的不动点集重合于置换模的Green环。     

SBIRS-HIGH对导弹上升段位置测量精度及中末段位置预报精度的分析

根据目前的技术水平分析了高空天基红外系统(SBIRS-HIGH)的技术参数;理论上计算了SBIRS-HIGH对导弹上升段的位置测量精度以及中末段任意时刻飞行位置的预报精度;研究了SBIRS-HIGH对中段和末端导弹拦截系统的导引能力。     

A Novel Biomass Supported Na2CO3 System for Flue Gas Desulfurization

The breakthrough and stoichiometric SO2 adsorption efficiencies of a biomass supported Na2CO3 system (80 wt %Na2CO3/straw) have reached 48.9% and 80.6% respectively at a desulfurization temperature of 80℃.     

R-拟连续模的不可分分解

设R是环,M是R-拟连续左R-模.如果R关于形如l（m）,m∈M的左理想满足升链条件,则M可写成一致子模的直和.     

激光产生的铝、硅、氧、铜、硒等离子体X光谱

利用长晶格的OHM晶体谱仪,从激光等离子体中获得丰富的铜、硒类氖、类氟、类钠离子的二、三、四级软X射线衍射光谱和铝、氧、硅的类氢、类氦、类锂离子一到四级谱,波长在14～40(?)之间,在此基础上,本文较为细仔地分析了各光谱结构.     

40Ar+238U 实验介绍

主要介绍了利用兰州重离子加速器提供的270 MeV的40Ar离子束轰击238U靶，通过熔合蒸发反应进行试合成Z=110附近的新同位素的实验情况。分析了目前关于超重核研究的现状并描述了这次实验的目的、 可行性分析、 实验装置以及实验过程等。本次实验仍然用氦喷嘴技术对产物进行传输， 并用一套具有数对探测器组的转轮收集探测系统对产物进行收集和测量。 The state of the experiment to produce the new isotopes around Z=110 are presented in this paper. The emphasis is laid upon introducing the experiment purpose, the set up and the feasibility for producing this objective nuclide. In the experiment the new isotopes were produced by the complete fusion evaporation reaction of 238U with 270 MeV 40Ar at the Sector Focus Cyclotron (SFC) of Heavy Ion Research Facility in Lanzhou(HIRFL). The reaction products were also transported and collected by using the helium jet technique and rotating wheel apparatus.