Enhancing electrooptic modulators using modulation instability

As electronic operating frequencies increase toward the terahertz regime, new electrooptic modulators capable of low‐voltage high‐frequency operation must be developed to provide the necessary optical interconnects. This Letter presents a new concept that exploits modulation instability to compensate for the intrinsically weak electrooptic effect, χ⁽²⁾. Simulations demonstrate more than 50 times enhancement of electrooptic effect at millimeter wave frequencies leading to a substantial reduction in the required modulation voltage.

     

Gravitational effects of rotating masses

A gyroscope in orbit about a central rotating mass undergoes relativistic nutational oscillations in addition to the well-known precessional motions. The amplitude of the oscillation is proportional to the angular momentum of the rotating mass and its period is the Fokker period of geodetic precession. The amplitude is maximum for a polar orbit and vanishes if the orbit is equatorial. This nodding effect is due to a small divisor phenomenon involving the Fokker frequency, and its existence implies that the applicability of the post-Newtonian approximation of general relativity is limited in time. The dynamical significance of the new effect for the relative motion of neighboring test masses in the field of a rotating mass as well as for the restricted three-body problem in general relativity is investigated and the possibility of its detection is briefly discussed.     

Designing different nanomagnets via delocalization of cobalt magnetic moment inside narrow single walled carbon nanotubes

Density functional theory calculations were employed to study the effects of chirality and diameter of single walled carbon nanotubes (SWCNTs) on electronic, structural and magnetic properties of cobalt-doped (9,0), (5,5) and (5,0) nanotube systems. The (9,0) and (5,5) SWCNTs have similar diameters but different chiralities, whereas the (5,0) tube has a very small diameter. The Co-SWCNT systems are considered with four different possible arrangements, three of which are stable and only substitution of the Co with one of the carbon atoms on the surface of the SWCNTs is an exemption. Although the quasi-metallic band gap of the (9,0) SWCNT is eliminated by the cobalt doping process, metallic features of the (5,5) and (5,0) nanotubes remain unchanged. On the other hand, delocalization of the cobalt’s magnetization and inducement of a noticeable magnetization to the tubes provide a vast area of possible total magnetizations for the Co-SWCNT systems. The results are applicable to spintronics and useful for designing other nanomagnetic systems.     

Axially distributed sensing for three-dimensional imaging with unknown sensor positions

Recently, an axially distributed sensing system was proposed for three-dimensional (3D) imaging where the sensors are distributed along the optical axis. In this previously reported system, a priori knowledge of exact sensor positions was required for 3D image reconstruction. In this Letter, we present an axially distributed sensing with unknown sensor positions along the optical axis. In this system, only the relative positions of two sensors are needed, whereas all other sensor positions are assumed unknown. Experiments are presented to illustrate the feasibility of the proposed system and illustrate the visual quality of reconstructed 3D images by using the proposed calibrated sensor positions. To the best of our knowledge, this is the first report on axially distributed sensing with unknown sensor positions.     

Optical time-domain analog pattern correlator for high-speed real-time image recognition

The speed of image processing is limited by image acquisition circuitry. While optical pattern recognition techniques can reduce the computational burden on digital image processing, their image correlation rates are typically low due to the use of spatial optical elements. Here we report a method that overcomes this limitation and enables fast real-time analog image recognition at a record correlation rate of 36.7 MHz--1000 times higher rates than conventional methods. This technique seamlessly performs image acquisition, correlation, and signal integration all optically in the time domain before analog-to-digital conversion by virtue of optical space-to-time mapping.     

Errorless and errorful learning modulated by transcranial direct current stimulation

Background

Caspase-3 is one of the most downstream enzymes activated in the apoptotic pathway. In caspase-3 deficient mice, loss of cochlear hair cells and spiral ganglion cells coincide closely with hearing loss. In contrast with the auditory system, details of the vestibular phenotype have not been characterized. Here we report the vestibular phenotype and inner ear anatomy in the caspase-3 deficient (Casp3 ^-/- ) mouse strain.

Results

Average ABR thresholds of Casp3 ^-/- mice were significantly elevated (P < 0.05) compared to Casp3 ^+/- mice and Casp3 ^+/+ mice at 3 months of age. In DPOAE testing, distortion product 2F1-F2 was significantly decreased (P < 0.05) in Casp3 ^-/- mice, whereas Casp3 ^+/- and Casp3 ^+/+ mice showed normal and comparable values to each other. Casp3 ^-/- mice were hyperactive and exhibited circling behavior when excited. In lateral canal VOR testing, Casp3 ^-/- mice had minimal response to any of the stimuli tested, whereas Casp3 ^+/- mice had an intermediate response compared to Casp3 ^+/+ mice. Inner ear anatomical and histological analysis revealed gross hypomorphism of the vestibular organs, in which the main site was the anterior semicircular canal. Hair cell numbers in the anterior- and lateral crista, and utricle were significantly smaller in Casp3 ^-/- mice whereas the Casp3 ^+/- and Casp3 ^+/+ mice had normal hair cell numbers.

Conclusions

These results indicate that caspase-3 is essential for correct functioning of the cochlea as well as normal development and function of the vestibule.     

Time-stretch oscilloscope with dual-channel differential detection front end for monitoring of 100 Gb/s return-to-zero differential quadrature phase-shift keying data

Optical performance monitoring of high-capacity networks is one of the enabling technologies of future reconfigurable optical switch networks. In such networks, rapid performance evaluation of data streams becomes challenging due to the use of advanced modulation formats and high data rates. The time-stretch enhanced recording oscilloscope offers a potential solution to monitoring high-rate data in a practical time scale. Here we demonstrate an architecture with a differential detection front end for simultaneous I/Q data monitoring of a 100 gigabits/s return-to-zero differential quadrature phase-shift keying signal. This demonstration shows the potential of this technology for rapid performance monitoring of high-rate optical data streams that employ advanced modulation formats.     

Effects of device resolution on three-dimensional integral imaging

We present the effects of a finite number of pixels in elemental images on the resolution and the depth of focus in three-dimensional integral imaging (II). We show that the number of pixels in elemental images determines not only the lateral resolution but also the depth resolution. The minimum number of pixels required in each elemental image is calculated to avoid depth-of-focus degradation. We evaluate how II system performance degrades as the number of pixels in each elemental image changes. The product of the depth of focus and the lateral resolution squared is used as the performance metric.     

Three-dimensional polarimetric integral imaging

A three-dimensional (3D) polarimetric image sensing and display technique based on integral imaging is proposed. Three-dimensional polarization distribution of reflected light from a 3D object can be measured as elemental image arrays by a rotating linear polarizer. After the measurement of the polarization of the 3D object, the 3D polarimetric object can be reconstructed optically by displaying the polarization-selected elemental images in spatial light modulators with two quarter-wave plates. Experimental demonstration of 3D polarimetric imaging of a 3D object attached to two orthogonal linear polarizers is presented. To the best of our knowledge, this is the first report on 3D polarimetric sensing imaging and 3D optical reconstruction by integral imaging.