柔性有机场效应晶体管研究进展

柔性有机场效应晶体管具有可折叠、质量轻、低成本等优点,在柔性显示、柔性传感器、柔性射频标签和柔性集成电路等方面显示了广阔的应用前景.本文在介绍柔性有机场效应 晶体管最新研究进展的基础上, 总结了柔性有机场效应晶体管的器件结构和柔性有机场效应晶体管所使用的衬底材料、 栅绝缘层材料、有源层材料及电极材料, 阐述了柔性有机场效应晶体管的制备工艺, 并讨论了不同的弯曲方式对柔性有机场效应晶体管性能的影响, 最后总结和展望了柔性有机场效应晶体管的应用领域. 关键词： 柔性 晶体管 有机/聚合物 溶液加工     

15.14MeV/u 136Xe离子引起的单粒子效应

研究了15.14MeV/u ¹³⁶Xe离子在不同批次的32k×8bits静态存储器中所引起的单粒子效应.获得了单粒子翻转和单粒子闭锁截面与入射角度的依赖关系.将单粒子效应截面与灵敏区中沉积的能量相联系,而不是线性能量转移(LET)值.估计了灵敏体积的深度和死层的厚度.     

高能氩离子辐照硅产生的缺陷研究

在室温下750MeV氩离子对本征单晶硅进行辐照,通过用正电子湮没寿命测量技术、电子顺磁共振技术以及红外光吸收方法研究了辐照产生的缺陷.结果表明:电中性双空位是辐照产生的主要空位团;在4.3×10¹⁴ions/cm²的高剂量下未见样品发生非晶化转变;虽然在离子射程末端双空位的浓度随剂量的增加而显著增大,但在以电离激发过程为主要能损方式的区域里双空位的浓度基本不变.据此可以认为,电子能损过程对辐照产生的缺陷有退人作用.     

纯金属中电子能损效应的实验研究

简要评述了快重离子辐照在纯金属中引起的电子能损效应的实验研究结果 ,特别是强电子能损在金属中引起的辐照缺陷的部分退火、新缺陷的产生 .离子潜径迹的形成和辐照相变等. As swift heavy ions are available for irradiation damage study, it has been tried to evidence whether electronic energy loss might play a role in the damage processes of metallic targets. Experimental investigations showed that, as increase of electronic energy loss, large amount of electronic energy loss can result in radiation annealing of part of defects produced by elastic collisions, defect creation, latent track formation, as well as phase transition, and so on. Pure metals...     

荷能离子在C60薄膜中引起的辐照效应

用 Raman散射和 XPS技术分析了能量为几百 ke V到几百 Me V的多种离子在 C60 薄膜中引起的辐照效应.分析结果表明 ,在低能重离子辐照的 C60 薄膜中 ,其晶态向非晶态的转变过程是由核碰撞主导的.在快离子 (1 2 0 ke V的 H离子和171.2 Me V的 S离子 )辐照的情况下,电子能损起主导作用.发现在H离子辐照过程中,电子能损有明显的退火效应 ,致使 C60 由晶态向非晶态转变的过程中,经历了一个石墨化的中间过程;而在 S离子辐照的情况下 ,电子能损的破坏作用超过了退火效应 ,因此 ,在C₆₀ 由晶态向非晶态转变的过程中,无石墨化的中间过程.Irradiation effecs (mainly including transformation from crystalline into amorphous state) of C 60 films induced by 120 keV H, He, N, Ar, Fe and Mo ions, 240 keV and 360 keV Ar ions, and 171.2 MeV, 125.3 MeV and 75.8 MeV S ions were analysed by means of Raman scattering and XPS technique. The analysis results indicate that amorphization process in the cases of N, Ar, Fe and Mo ions irradiation is dominated by nuclear collision, but in the case of H ion irradiation, the process is...     

III-V族化合物半导体材料的高能重离子辐照效应

用高能（５００ＭｅＶ）Ｎｅ离子束对ＧａＡｓ和ＩｎＰ进行了辐照，用ＭｏｎｔｅＣａｒｌｏ模拟、正电子湮没谱学以及红外光谱研究了辐照产生的缺陷特性．结果表明，在未辐照的样品中存在单空位，经辐照后，可在样品中产生单空位；当剂量较大时，还会形成双空位甚至尺寸较大的空洞．红外光谱测量发现，在辐照后的ＧａＡｓ样品中有非晶区形成．此外，辐照在样品中还产生了反位缺陷ＧａＡｓ和ＩｎＰ以及受主杂质ＺｎＩｎ．对经１０１４ｉｏｎｓ／ｃｍ２剂量辐照的ＩｎＰ进行了光学实验，在辐照后的ＩｎＰ材料中发现了亚稳态中心． Both GaAs and InP were irradiated by high energy (500 MeV) Ne ions. The Monte Carlo simulation, positron annihilation and IR spectroscopy were used to study the radiation induced defects. The result showed that monovacancies existed in as grown samples, but more monovacancies were introduced, after Ne ions irradiation, and with increasing radiation dose, divacancies were formed, and eventually large voids were observed. The IR measurement for irradiated GaAs samples confirmed the...     

用重离子实验数据推算质子翻转截面和轨道翻转率

空间单粒子辐射环境主要由重离子和高能质子构成,但在地面利用两种离子评估器件单粒子效应敏感度成本太高,因此利用重离子实验数据推算质子敏感参数成为一个非常活跃的研究课题.利用Barak经验公式,在重离子实验获得器件的σ LET值曲线的基础上,计算了几种典型器件在不同能量下的质子翻转截面以及典型轨道上质子引起的翻转率,并同FOM方法预示的质子翻转率进行了比较,其结果将对卫星电子系统抗辐射加固设计具有重要参考价值. The radiation environments concerned with single event upset mainly consist of heavy ions from cosmic ray and large flux proton from solar events and planetary radiation belts. The most reliable calculation for SEE rate induced by proton and henvy ions are the way to use the experimentally measured data rospectively. But it is too expensive to test devices with both heavy ions and protons. So it is necessary to derive models for predicting proton cross sections and rates from heavy ion test data....     

电化学方法制备Si阵列微孔的工艺研究

对用电化学方法制备Si大孔阵列管坑工艺进行了初步探索。 通过对Si在KOH溶液中各向异性湿法蚀刻和在HF酸溶液中的电化学蚀刻过程中各种参数的摸索, 确定在室温下制备大孔阵列的最佳配比浓度, 蚀刻出符合要求的管坑阵列, 为进一步制备结构化闪烁屏奠定了实验基础。 The 3 D structures in silicon are increasingly coming to use in many fields. For example, the high resolution X ray digital imaging detector can be made by coupling CCD and the scintillating screen which is made by the array trenches filled with CsI(Tl). In the present work, we explored the technology of etching micro array on the n type silicon with high resistance. By studying the relative parameters of anisotropic etching of KOH and electro chemical etching of HF, the optimized concentration of HF was determined and the micro pore array trenches with 200 μm in depth were realized. The results establish an experimental base for further fabrication of the scintillating screen.     

一维等离子体光子晶体的带隙研究

采用时域有限差分方法(FDTD),结合等离子体计算中的分段线性电流密度卷积技术(PLJERC)对一维等离子体光子晶体(1D-PPC)进行了数值模拟,给出了微分高斯脉冲在一维等离子体光子晶体中的传播过程。计算得到的带隙结构与K-P模型方法的结果一致。计算并分析了等离子体频率、介质介电常数、等离子体-介质层的厚度比以及周期厚度对一维等离子体光子晶体带隙结构的影响。