直线运动动态目标发生器光学系统设计

直线运动动态目标发生器用于检测与标定光电跟瞄吊舱的动态分辨率、跟踪带宽等性能指标。动态目标发生器内置平行光管用于模拟无限远动态目标,动态图形置于光管的焦平面并做变速直线运动模拟地面景物的移动动态。发生器内的平行光管由于其长焦距、大口径、大视场的特点,其二级光谱需重点考虑,基于复消色差理论,矫正二级光谱并平衡场曲等其余像差。设计了1m焦距、口径100mm、视场角为5°的大视场、长焦距无限远目标模拟光学准直系统。设计结果表明,光学系统的传递函数优于0.3@100lp/mm,畸变≤0.03%,沿轴色差远小于焦深,有效地矫正了二级光谱。采用分辨率板法检测光学系统的轴上、轴外点的空间分辨率,检测结果表明光管的空间分辨率均达到20组152lp/mm,满足系统要求。     

丙烯酰胺在聚乙二醇水溶液中聚合初期的液滴形成与成长过程

用动态激光光散射(DLS)在线观测了丙烯酰胺(AM)在聚乙二醇(PEG)水溶液中聚合初期液滴的出现、生长及聚并过程,考察了PEG分子量和浓度对聚合初期液滴尺寸的影响;用透射电镜(TEM)对聚合初期液滴形态的演变进行了观察,发现与DLS结果能很好吻合.用分光光度计对聚合体系分相点进行确定,采用溴化法测定了聚合体系临界分相时的转化率.随PEG分子量或浓度的升高,临界分相转化率逐渐减小;随温度的升高,临界分相转化率先减小后增大,在50℃左右出现最小值.用凝胶渗透色谱(GPC)对聚合体系临界分相时聚丙烯酰胺(PAM)的分子量进行了研究,变化趋势与临界分相转化率的变化一致.在上述基础上,提出了AM在PEG水溶液中聚合初期的液滴形成、成长机理.     

Micro-vibrating spatial filters-induced beam positioning stability in large laser system

A dynamic beam propagation model of micro-vibrating spatial filters in inertial confinement fusion(ICF) facilities is built based on the additional beam in SG-II facility.The transfer matrix is then deduced,and the sensitivities of the beam positioning to the pellet in the target area to the vibrations of every spatial filter are analyzed,which indicates that the vibrations of spatial filters in the pre-amplify zone has less effects on beam positioning stability at the target.In addition,the vibrations of spatial filters in the main amplify zone dominates the beam positioning stability of the target,especially the vibration of the spatial filter SF7.     

C波段加速器初步热测实验

为了开展加速器小型化技术研究,进行了C波段2 MeV驻波加速器研制工作。目前,该加速器研制取得了显著进展,完成了全密封加速管的焊接,建立了加速器热测实验平台。在重复频率50 Hz情况下,进行了初步热测出束实验,利用电离室剂量仪测试了加速器靶前1 m处的X射线剂量率,并利用钢吸收法测试了电子束的能量。初步实验结果表明:电子束能量约2.5 MeV,剂量率超过330 mGy/(minm)。     

高能工业CT用新型X射线源焦斑测量

 为了获得较高的空间分辩率，设计了一种新型小束斑驻波电子直线加速器，该加速器取消了加速腔中的鼻锥结构，而在耦合腔中设置鼻锥结构。用狭缝法代替小孔法测得X射线源的焦斑尺寸为1.4mm。讨论了射线源焦点对成像质量的影响，分析了在高能条件下小孔法不适合用于焦点测量的物理原因，用4种测量方法测量了该高能X射线源的参数，测得该系统的成像极限分辩率为2.5 lp/mm，最后对实验结果进行了分析。     

用纵向克尔磁光效应观察磁畴

本文采用增镀折射率较大的介质薄膜及利用会聚光束的方法,提高了克尔磁光效应观察磁畴的效果。此方法简便易行,适宜于进行磁畴的演示实验教学及从事磁畴结构的研究工作。     

利用宇宙线对BESⅢ量能器CsⅠ（Tl）晶体探测器单元的测量

利用宇宙射线进行探测器模型的性能测试是高能物理普遍采用的方法，其中最重要的步骤之一就是确定宇宙线入射的准确位置和径迹．多数采用丝室探测器来进行宇宙线的精确定位，需要很高的造价和复杂的电子学系统．本文介绍一种简单的定位方法，采用塑料闪烁体条加波移剂光纤编码读出的方式，可以实现精度为1cm的定位．据此建立了一套实验装置，对BESⅢ电磁量能器CsⅠ（Tl）晶体探测器单元的光输出强度和不均匀性进行了测量．     

Accumulation effect of SiO_2 protective layer on multi-shot laser-induced damage in high-reflectivity HfO_2/SiO_2 coatings

The accumulation effects in high-reflectivity(HR) HfO2/SiO2 coatings under laser irradiation are investigated.The HR HfO2/SiO2 coatings are prepared by electron beam evaporation at 1 064 nm.The laser-induced damage threshold(LIDT) are measured at 1 064 nm and at a pulse duration of 12 ns,in 1-on-1 and S-on-1 modes.Multi-shot LIDT is lower than single-shot LIDT.The laser-induced and native defects play an important role in the multi-shot mode.A correlative theory model based on critical conduction band electron density is constructed to elucidate the experimental phenomena.     

Single- and multi-shot laser-induced damages of Ta_2O_5/SiO_2 dielectric mirrors at 1064 nm

Ta2O5/SiO2 dielectric mirrors deposited by ion beam sputtering (IBS) are studied. The multi-shot laserinduced damage threshold (LIDT) and its dependence on the number of shots are investigated, after which we find that the multi-shot LIDT is lower than that of single-shot. The accumulation effects of defects play an important role in the multi-shot laser damage. A simple model, which includes the conduction band electron production vsa multiphoton and impact ionizations, is presented to explain the experimental phenomena.