Numerical study on performance of disk MHD generator using frozen inert gas plasma

In an magnetohydrodynamic (MHD) generator using a frozen inert gas plasma (FIP), the availability of a frozen argon plasma, the influence of plasma uniformity at the generator inlet on the performance, and the feasibility of a large-scale generator are numerically examined by /spl gamma/-/spl theta/ two-dimensional simulation. The FIP is produced by pre-ionizing inert gas without an alkali metal seed at the generator inlet, then the ionization degree of the plasma is kept almost constant in the whole of the channel because of considerable slow recombination of the inert gas just like frozen reaction plasma. It is found that not only helium, but also argon frozen plasma MHD generation is realized, although highly accurate control of inlet ionization degree is necessary for argon. It is important to reduce the nonuniformity of plasma properties at the generator inlet in order to raise the maximum enthalpy extraction ratio. Even for the large-scale generator with 1000-MW thermal input, the ionization degree is kept almost constant in the whole of the channel and the high performance is obtainable. This result is extremely attractive for the FIP MHD generator.     

Synthesis and orientation study of a magnetically aligned liquid‐crystalline chitin/poly(acrylic acid) composite

A high magnetic field of 5 T was used to fabricate a magnetically aligned, optically anisotropic, liquid‐crystalline chitin/poly(acrylic acid) composite. The aligned mesophase was fixed by photoinitiated free‐radical polymerization. From an examination of polarized optical micrographs and an X‐ray diffraction study, a high degree of orientation of 0.70 was observed for the composite with a higher liquid‐crystalline chitin concentration (10.70 wt %); the orientation was reduced with a decreased chitin concentration at a given acrylic acid concentration. The X‐ray data for the developed composite showed a uniplanar orientation for the chitin crystallites, with its molecular long axes perpendicular to the direction of the magnetic field. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 711–714, 2003     

Synthesis of large macrocyclic tetraaza compounds with a methylene backbone: Cyclo[-NH- (CH2)n-]4, (n = 6, 7, 8, 9 and 10). The formation of 28-, 32-, 36-, 40- and 44-membered rings

A series of macrocyclic tetraamines with 28-, 32-, 36-, 40- and 44-membered rings have been efficiently prepared from the corresponding ditosylamide and monobromoalcohol derivatives in 6 steps via a double condensation reaction. Overall yields were: 41, 41, 46, 29, and 33%, respectively, for 1,8,15,22-tetraazacyclooctacontane ( 11a ), 1,9,17,25-tetraazacyclodotriacontane ( 11b ), 1,10,19,28-tetraazacyclohexatriacontane ( 11c ), 1,11,21,31-tetraazacyclotetracontane ( 11d ) and 1,12,23,34-tetraazacyclotetratetracontane ( 11e ).     

Penetration of plasma surface modification. I. Cf4 and C2F4 glow discharge plasmas

Plasma treatment of a polymeric surface could involve at least three major mechanisms: (1) direct interaction of reactive species in the low-temperature plasma state with the surface (line of sight irradiation effect), and (2) chemical reactions of plasma-induced reactive species with the surface, and (3) reactions among reactive species and the surface (plasma polymerization). The first and the third effects are considered to be limited to the surfaces which directly contact with plasma (glow). The second effect is not limited to the surfaces that contact with plasma state but can penetrate beyond the plasma zone by diffusion. Using an assembly of fibers, of which only the top layer contacts with plasma (glow), the penetration of chemical changes caused by plasma exposure was investigated. Results indicate that the fluorination effect (incorporation of fluorine-containing moieties on the surface of polymeric substrate) penetrates through a considerable thickness of the assembly of fibers, depending on the porosity (gas permeability) of the system. Chemical reactions of plasma-induced (chemically) reactive but nonpolymerizing species with the substrate fibers seems to predominate. The direct interactions of energetic species, such as ions, electrons, and electronically excited species, with polymeric surfaces seems to play relatively minor roles in the plasma treatment investigated. The major role of plasma, in this case, seems to be creating such chemically reactive species. © 1994 John Wiley & Sons, Inc.     

Uniaxial alignment of the smallest diamagnetic susceptibility axis using time-dependent magnetic fields

A diamagnetic particle with magnetic susceptibilities chi3 < chi2 = chi1 < 0 was subjected to a rotating magnetic field to obtain an alignment of the chi3 axis (the smallest susceptibility axis) in the direction perpendicular to the plane of the rotating magnetic field. A polymer short fiber, whose fiber axis coincides with the chi3 axis, was suspended in a fluid with the same density, and then a rotating magnetic field generated by a rotation of a pair of permanent magnets was applied. The fiber axis, rotating following the applied field, finally ended up with an alignment perpendicular to the plane of the rotating magnetic field. The experimental data on the time course of the alignment was in good agreement with the numerical calculation based on the equation of rotation.     

Highly efficient methods for metacyclophane synthesis

Highly efficient methods for synthesizing metacyclophanes such as 2,6-bridged pyrones and pyridines are described. 4-Hydroxy-2-pyrone derivative 3 bridged at the 3 and 6-positions is readily available. This compound was transformed into 2,6-bridged 4-pyrone 4 on heating in ethanol or in hydrochloric acid. Heating 4 with ammonia or methylamine afforded the corresponding 2,6-bridged 4-pyrone 7 or 8. These pyridones were synthesized directly from 3 by treatment with ammonia or methylamine. These methods have a wide applicability to the bridge length of metacyclophane; compounds with a short bridge (n=8) as well as long bridge (n=18) are synthesized in satisfactory yields.     

Theoretical study of benzonitrile clusters in the gas phase and their adsorption onto a Au(111) surface

We made theoretical calculations for a benzonitrile molecule and its clusters in the gas phase and as adsorbed on the Au(111) surface, to explain the observation by scanning tunneling microscope, that is, the trimer formation of cyanophenyl porphyrins adsorbed onto the Au(111) surface. With regard to the gas-phase species, ab initio calculations showed that (1) the benzonitrile dimer has a single stable structure that is planar and antiparallel; (2) the trimer has two isoenergetic stable structures, that is, a planar and cyclic structure and an antiparallel and nonplanar one; (3) the clusters are more stable, at low temperatures, than the monomer. For the adsorbed species, we made quantum mechanical/molecular mechanical calculations in which the interaction between the adsorbates and the surface is evaluated in a molecular-mechanical way by using analytical potential functions and an image charge model. Because the stable structures were found to be similar to those in the gas phase, the cluster formation of adsorbed cyanophenyl porphyrins was attributed to the interaction between cyanophenyl groups, which is barely affected by adsorbate-surface interaction. It was also found that the adsorbed cyclic benzonitrile trimer is more stable than the monomer and the dimer because the relative stability is dependent on enthalpy alone. We therefore concluded that the preferential formation of trimers by the adsorbed cyanophenyl porphyrins is due to the negligible contribution of entropy to the relative stability of the adsorbed species and that the adsorption hardly changes the situation found in the gas phase.     

A new synthesis of pyrroles by the condensation of cyclopropenes and nitriles mediated by gallium(III) and indium(III) salts

Gallium(III) and indium(III) halides were found to mediate the condensation of cyclopropenes and nitriles to give pyrrole derivatives in moderate yields. When excess nitrile was present, diazepine was also formed.     

Development of Plasma Window for gas charge stripper at RIKEN RIBF

A differential pumping system with a Plasma Window (PW) has been developed for an application to a window-less He gas charge stripper. A PW with Southern Methodist University design was newly fabricated and tested off-line for evaluation of differential pumping efficiency. Switching gases for plasma seed from Ar to He was tested. It was found that the PW reduced the pressure at the first differential pumping section to 1/13 for Ar and to 1/17 for He, comparing with differential pumping without PW. At the second pumping section, the pressures were drastically reduced to 1/160 and to 1/4,520 for Ar and He, respectively. These pressure reduction factors indicate that one differentially pumped stage could be removed from a conventional differential pumping system.