Coated wire silver-ion selective electrode based on a N,N'-bis(2-thienylmethylene)-1,2-diaminobenzene.

A novel membrane coated platinum-wire electrode (MCPWE) based on N,N'-bis(2-thienylmethylene)-1,2-diaminobenzene (BTMD) for highly selective determination of Ag+ ion has been developed. The influences of membrane composition and pH on the potentiometric responses of electrode were investigated. The potentiometric responses are independent of the pH of the test solution in the range of 5.0 - 9.0. The electrode shows a linear response for Ag+ ion over the concentration range of 1.0 x 10(-60 to 1.0 x 10(-1) M with a lower detection limit of 6.0 x 10(-7) M. The electrode possesses a Nernstian slope of 59.7 mV decade(-1) and a fast response time of < or = 17 s and can be used for at least 2 months without any observable deviation. The proposed electrode displayed very good selectivity for Ag+ ion with respect to NH4+ and alkali, alkaline earth and some common transition metal ions. The practical utility of the electrode has been demonstrated by its use as the indicator electrode in the potentiometric titration of an AgNO3 solution with a NaI solution and in determination of the silver content of a developed radiological film.     

Highly selective PVC-membrane electrodes based on Co(II)-Salen for determination of nitrite ion.

A cobalt(II) derivative was used as a suitable ionophore for the preparation of a polymeric membrane nitrite-selective electrode. The electrode reveals a Nemstian behavior over a very wide NO2- ion concentration range (1.0 x 10(-6)-1.0 x 10(-1) M) and a very low detection limit (5.0 x 10(-7) M). The potentiometric response is independent of the pH of solution in the pH range 4.0-9.5. The electrode shows advantages such as low resistance, fast response and, most importantly, good selectivity relative to a wide variety of inorganic and organic anions. In fact, the selectivity behavior of the proposed NO2- ion-selective electrode shows great improvements compared to the previously reported electrodes for nitrite ion. The proposed electrodes could be used for at least 2 months without any significant changes in potentials. The electrode was successfully applied to the determination of nitrate ion concentrations in sausage and milk samples.     

Coaxial Discharge and Transverse Magnetic Field

The study deals with the effect of an applied transverse magnetic field on the dynamics and parameters of the focused and expanded plasma in a coaxial discharge. The experimental results were found with a 3 kJ Plasma focus device of a Mather geometry. The discharge takes place in hydrogen gas with base pressure of 0.5 Torr. The experiments are conducted with a 10 kV bank voltage, which corresponds to 100 kA peak discharge current with rise time 8 μs. Helmholtz magnetic coils are placed outside the expansions chamber to produce a transverse magnetic field with intensity 280 G perpendicular to the plasma expanded from the coaxial electrodes. The investigations have shown that the plasma flow along the expansion chamber axis is restricted when applying the externally transverse magnetic field and the maximum axial velocity of the expanded plasma is decreased by 33%. X-ray probe has been used to measure the focused plasma electron temperature (T_e). The experimental results and the calculations showed that T_e is decreased from 2.2 keV to 800 eV with the application of a transverse magnetic field. The expanded plasma electron temperature and density have been measured by an electric double probe, the results cleared that the expanded plasma electron temperature is decreased by 2.6 times while its density is increased by 9 times, when a transverse magnetic field is applied.     

Bis(2-hydroxyacetophenone)ethylenediimine as a neutral carrier in a coated-wire membrane electrode for lead(II).

A coated-wire ion-selective electrode (CWISE), based on a Schiff base as a neutral carrier, was successfully developed for the detection of Pb(II) in aqueous solution. CWISE exhibited a linear response with a Nernstian slope of 29.4 +/- 0.5 mV/decade within the concentration range of 1.0 x 10(-5) - 1.0 x 10(-1) M lead ion. CWISE has shown detection limits of 5.0 x 10(-6) M. The electrode exhibited good selectivity over a number of alkali, alkaline earth, transition and heavy metal ions. This sensor yielded a steady potential within 10 to 20 s at a linear dynamic range. The electrode was suitable for use in aqueous solutions in a pH range of 2.0 to 5.0. Applications of this electrode for the determination of lead in real samples and as indicator electrode for potentiometric titration of Pb2+ ion using K2CrO4 are reported.     

Koordinationschemie von Dinitroresorcin mit Kupfer-, Kobalt-, Nickel-, Eisen- und Zinksalzen

The reactions of the bidentate dinitrosoresorcinol (DNR) with copper, cobalt, nickel, iron and zinc salts were investigated. This ligand was found to react with these metal salts in aqueous media where hydrogen ion was confirmed to be liberated except in case of iron. The solid complexes were prepared in alcoholic media. Chemical analyses, magnetic and spectral data were compatible to determine the structure of these complexes and their mode of chelation.

---

---

Mit 2 Abbildungen     

Polyvinylpolypyrrolidone-bound boron trifluoride (PVPP-BF3); a mild and efficient catalyst for synthesis of 4-metyl coumarins via the Pechmann reaction

Polyvinylpolypyrrolidone-supported boron trifluoride has been studied for synthesis of 4-methyl coumarin by the Pechmann reaction. The reaction proceeded smoothly with hydroxyl phenols and ethyl acetoacetate in good yields in ethanol at reflux conditions. The polyvinylpolypyrrolidone-boron trifluoride complex is a non-corrosive and stable solid catalyst elevated Lewis acid property.     

An ultra-small heterostructure wavelength division multiplexer (WDM) with the ability to select two wavelengths from the s-band

In this article, a photonic crystal channel drop filter (CDF) based on \(2\times 3\) ring resonators is presented. At first, the effects of changing the radius of lattice rods and the lattice dielectric constant on the dropping efficiency of a 3-port CDF with one resonator are investigated. Then by developing this base structure, a new 4-port heterostructure CDF composed of two regions with rods made of silicone and germanium is presented, which can operate in the ‘S’ band of the communication window. The photonic crystal heterostructure CDF consists of a horizontal waveguide and two ring resonators that have been installed, in symmetry to the horizontal axis, in two regions with different refractive indices. These ring resonators act as energy couplers and capture at their resonant frequencies the electromagnetic energy which is propagated in the bus waveguide. For the analysis of transmission characteristics and the band structure of the filter, two methods have been employed: the two-dimensional Finite–difference time domain method and the Plane Wave Expansion method. In the final structure, dropping efficiencies of 97 and 89 % can be achieved at ports D and B, respectively, and also an acceptable quality factor can be obtained in the communication window. The overall size of this device is 174.14  \(\upmu \hbox {m}^{2}\) . Due to its small size, this structure can be used in Wavelength Division Multiplexer applications in the Optical Integrated Circuits.     

Torus Knots and the Topological Vertex

We propose a class of toric Lagrangian A-branes on the resolved conifold that is suitable to describe torus knots on S ³. The key role is played by the \({SL(2, \mathbb{Z})}\) transformation, which generates a general torus knot from the unknot. Applying the topological vertex to the proposed A-branes, we rederive the colored HOMFLY polynomials for torus knots, in agreement with the Rosso and Jones formula. We show that our A-model construction is mirror symmetric to the B-model analysis of Brini, Eynard and Mariño. Compared to the recent proposal by Aganagic and Vafa for knots on S ³, we demonstrate that the disk amplitude of the A-brane associated with any knot is sufficient to reconstruct the entire B-model spectral curve. Finally, the construction of toric Lagrangian A-branes is generalized to other local toric Calabi–Yau geometries, which paves the road to study knots in other three-manifolds such as lens spaces.     

The role of matching thickness on the wideband electromagnetic wave suppresser using single layer doped barium ferrite

The effect of Mg²⁺, Co²⁺and Ti⁴⁺ substitution on microwave absorption has been studied for BaMg_0.5Co_0.5Ti_1.0Fe₁₀O₁₉ ferrite-acrylic resin composite in frequency range from 13 to 20 GHz. X-ray diffraction (XRD), scanning electron microscopy (SEM), vector network analysis and vibrating sample magnetometry (VSM) were employed to analyze structure, electromagnetic and microwave absorption properties of prepared ferrite. The obtained results of reflectivity demonstrate that by varying matching thickness along with weight percentage of ferrite to acrylic resin, the bandwidth coupled with reflection loss values of prepared composites can be easily tuned. Based on microwave measurement on reflectivity, it is found that BaMg_0.5Co_0.5Ti_1.0Fe₁₀O₁₉ is a good candidate for wideband electromagnetic compatibility and other practical applications at high frequency.