Comparison of stimulated-emission-pumping fluorescence dip spectrometry and conventional fluorescence spectrometry in application to supersonic jet spectrometry

Summary A supersonic jet spectrum of 9,10-dichloroanthracene is measured by stimulated-emission-pumping fluorescence dip spectrometry and conventional fluorescence spectrometry. The performance obtained is compared for these spectrometric methods, providing same information concerned with the energy level of the ground state. The former is more preferential for measurement of a high-resolution spectrum, since the spectral resolution is determined by the linewidth of the dumping laser. On the other hand, the latter is more preferential for measurement with better sensitivity at the expense of the spectral resolution, since the fluorescence throughput can be improved by increasing the slit width of the monochromator.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Changes in the near-edge X-ray absorption fine structure spectra of long-chain diacetylene derivatives through photopolymerization in Langmuir–Blodgett films

Photopolymerization of cadmium 10,12-pentacosadiynoate (CdDA) in Langmuir–Blodgett (LB) films, with the molecular packing well arranged by moderate preannealing, was investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Greenish films of polydiacetylene with an absorption wavelength of 705 nm were obtained through the photopolymerization of preannealed monomer LB films, and this resulted in an extended π-conjugate system based on the well-ordered monomer in a two-dimensional arrangement. The electronic structures of the polydiacetylenes were found to be correlated to the variation of the molecular arrangements in the films from the changes in the NEXAFS spectra through photopolymerization in the LB films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2329–2336, 2004     

Application of total reflection X-ray fluorescence spectrometry to small glass fragments.

Total reflection X-ray fluorescence spectrometry (TXRF) has been applied for trace elemental analysis of small glass fragments. A small glass sample (a fragment with weight less than 0.5 mg) was decomposed by 100 microg of HF/HNO3 acid; the material was condensed to 10 microl and was dried on a Si wafer. Since the size of the dried residue on the Si wafer was less than 1 cm in diameter, an incident X-ray beam with about 1 cm in width could effectively excite elemental components in such a small glass fragment. The precision of the present technique was checked by analyzing the glass fragments (<0.5 mg) from NIST SRM612; the relative standard deviations (RSD) of less than 8.1% were achieved for elemental ratios that were normalized by Sr. Fragments (<0.5 mg) obtained from 23 figured sheet glasses were used as samples for estimating the utility of this technique to forensic discrimination. Comparison of five elemental ratios of Ti/Sr, Mn/Sr, Zn/Sr, Rb/Sr, and Pb/Sr calculated from X-ray fluorescence spectra was effective in distinguishing glass fragments that could not be differentiated by their refractive indexes (RI).     

Mycosamine orientation of amphotericin B controlling interaction with ergosterol: sterol-dependent activity of conformation-restricted derivatives with an amino-carbonyl bridge

Amphotericin B (AmB 1) is known to assemble together and form an ion channel across biomembranes. The antibiotic consists of mycosamine and macrolactone moieties, whose relative geometry is speculated to be determinant for the drug's channel activity and sterol selectivity. To better understand the relationship between the amino-sugar orientation and drug's activity, we prepared conformation-restricted derivatives 2-4, in which the amino and carboxyl groups were bridged together with various lengths of alkyl chains. K+ influx assays across the lipid-bilayer membrane revealed that ergosterol selectivity was markedly different among derivatives; short-bridged derivative 2 almost lost the selectivity, while 3 showed higher ergosterol preference than AmB itself. Monte Carlo conformational analysis of 2-4 based on NOE-derived distances indicated that the amino-sugar moiety of 2 comes close to C41 because of the short bridge, whereas those of 3 and 4 are pointing outward. The mutual orientation of the amino-sugar moiety and macrolide ring is so rigid in derivatives 2 and 3 that these conformations should be unchanged upon complex formation in lipid membranes. These results strongly suggest that the large difference in sterol preference between derivatives 2 and 3 is ascribed to the different orientation of amino-sugar moieties. These findings allowed us to propose a simple model accounting for AmB-sterol interactions, in which hydrogen bonding between 2'-OH of AmB and 3beta-OH of ergosterol plays an important role.     

Determination of arsenic at the picogram level by atomic absorption spectrometry with miniaturized suction-flow hydride generation

A continuous-flow hydride generator is modified and miniaturized for the determination of picogram amounts of arsenic by atomic absorption spectrometry. A 300-μl sample is dropped into a teflon cup and pumped into an alkaline sodium tetrahydroborate stream, which is acidified in a reaction coil. The evolved hydride is swept with argon through a phase separator into an electrically-heated quartz absorption cell and the absorbance is recorded. To eliminate differences in sensitivity between arsenic(III) and arsenic(V) without prereduction by potassium iodide, it is important that arsenic(V) be mixed with tetrahydroborate prior to mixing with hydrochloric acid. The method has a detection limit of 0.08 ng As ml^?1 (24 pg) and the calibrations is linear up to 50 ng As ml^?1. The relative standard deviation for 10 replicate measurements is 5.4% for 0.5 ng As ml^?1. The addition of potassium iodide and hydroxylamine is confirmed to be effective in minimizing some interferences. The sampling rate is 90 h^?1. Results for NBS biological and steel reference materials demonstrate applicability of the technique.     

Kinetic approach to radiation-induced grafting in the polyethylene–styrene system. II

The investigation method reported in the previous paper was applied to four reaction methods: preirradiation method with reaction in liquid monomer, preirradiation method with reaction in monomer vapor, simultaneous irradiation method in liquid, and simultaneous irradiation method in vapor. The increasing patterns and values of the degree of grafting experimentally obtained roughly agreed with those calculated by using the same rate constants. At high monomer concentration, the rate of grafting was small; at low monomer concentration, the rate of grafting was large. Strictly speaking, the data by simultaneous irradiation method were somewhat larger than those by calculation. Two additional factors, as homopolymerization and the grafting from the radicals formed on the grafted polystyrene, were considered and discussed. The rate constants obtained were also discussed.     

Effects of solvent in photo-induced graft copolymerization of vinyl monomers on cellulose

The effects of swelling of the sample and polymerization solvents were studied for photo-induced graft copolymerization of vinyl monomers on cellulose. The graft copolymerization of methyl methacrylate (MMA) was activated by swelling of the sample or organic solvent-water solutions within a certain range of their concentrations. Though each organic solvent gave a maximum in per cent grafting and the number of grafts at about 25 vol-% concentration, the initiation reaction scarcely took place at 100% concentration; thus, the solvent itself is considered to have a negative effect. The solvents used in the experiments were all hydrophilic, such as methanol, acetone, and dioxane. The average molecular weight of the grafted PMMA differed in each solvent, indicating a different characteristic effect of solvent on the growing grafted polymer radicals. The presence of ferric ion as a sensitizer stimulated further the contributions of the sample swelling and the organic solvents to the copolymerization reaction. A similar effect was observed for styrene as for MMA, but not for acrylic acid and methacrylic acid.     

The Electronic Structure of Azuleno[1,2,3-cd]phenalene and Azuleno[5,6,7-cd]phenalene,a Comparison

The photoelectron (PE.) spectra of azuleno[l, 2, 3-cd]phenalene ( 1 ) and azuleno- [5,6,7-cd]phenalene( 2 ) have been recorded. The first five bands of both compounds could be assigned to transitions corresponding to removal of electrons from 4a₂, 6b₁, 5b₁, 3a₂ and 4b_l orbitals. This assignment is based mainly on a comparison between the observed ionization potentials and orbital energies calculated in a HMO and a PPP model. The UV./VIS. polarized absorption spectrum of 1 in the region 10000–45000 cm^?1 has been measured by means of the stretched film technique. The measurements were performed in polyethylene sheets at 77°K. Several bands could be assigned to π* ← π transitions calculated by a PPP-CI method. A comparison between the electronic structures of 1 and 2 is made by means of a simple HMO diagram.     

Blue myoglobin reconstituted with an iron porphycene shows extremely high oxygen affinity

Myoglobin will be a good scaffold for engineering a function into proteins. To modulate the physiological function of myoglobin, almost all approaches have been demonstrated by site-directed mutagenesis, however, there are few studies which show a significant improvement in the function. In contrast, we focused on the replacement of heme in the protein with an artificial prosthetic group. Recently, we prepared a novel myoglobin reconstituted with an iron porphycene as a structural isomer of mesoheme. The bluish colored reconstituted myoglobin is relatively stable and the deoxymyoglobin reversibly binds ligands. Interestingly, the O2 affinity of the reconstituted myoglobin, 1.1 x 109 M-1, is a significant 1,400-fold higher than that of the native myoglobin. Furthermore, the unfavorable autoxidation kinetics show 7-fold decrease in rate for the reconstituted myoglobin relative to the native myoglobin, indicating the stable oxy-form against autoxidation. The net results come from the slow dissociation of the O2 ligand in the reconstituted myoglobin, koff = 0.11 s-1, because of the formation of strong hydrogen bond between His64 and negatively charged dioxygen. The present study indicates that the replacement of native heme with an artificially created prosthetic group will give us a unique function into a hemoprotein.