Mechanism of the mild functionalization of arenes by diboron reagents catalyzed by iridium complexes. Intermediacy and chemistry of bipyridine-ligated iridium trisboryl complexes

This paper describes mechanistic studies on the functionalization of arenes with the diboron reagent B(2)pin(2) (bis-pinacolato diborane(4)) catalyzed by the combination of 4,4'-di-tert-butylbipyridine (dtbpy) and olefin-ligated iridium halide or olefin-ligated iridium alkoxide complexes. This work identifies the catalyst resting state as [Ir(dtbpy)(COE)(Bpin)(3)] (COE = cyclooctene, Bpin = 4,4,5,5-tetramethyl-1,3,2-dioxaborolanyl). [Ir(dtbpy)(COE)(Bpin)(3)] was prepared by independent synthesis in high yield from [Ir(COD)(OMe)](2), dtbpy, COE, and HBpin. This complex is formed in low yield from [Ir(COD)(OMe)](2), dtbpy, COE, and B(2)pin(2). Kinetic studies show that this complex reacts with arenes after reversible dissociation of COE. An alternative mechanism in which the arene reacts with the Ir(I) complex [Ir(dtbpy)Bpin] after dissociation of COE and reductive elimination of B(2)pin(2) does not occur to a measurable extent. The reaction of [Ir(dtbpy)(COE)(Bpin)(3)] with arenes and the catalytic reaction of B(2)pin(2) with arenes catalyzed by [Ir(COD)(OMe)](2) and dtbpy occur faster with electron-poor arenes than with electron-rich arenes. However, both the stoichiometric and catalytic reactions also occur faster with the electron-rich heteroarenes thiophene and furan than with arenes, perhaps because eta(2)-heteroarene complexes are more stable than the eta(2)-arene complexes and the eta(2)-heteroarene or arene complexes are intermediates that precede oxidative addition. Kinetic studies on the catalytic reaction show that [Ir(dtbpy)(COE)(Bpin)(3)] enters the catalytic cycle by dissociation of COE, and a comparison of the kinetic isotope effects of the catalytic and stoichiometric reactions shows that the reactive intermediate [Ir(dtbpy)(Bpin)(3)] cleaves the arene C-H bond. The barriers for ligand exchange and C-H activation allow an experimental assessment of several conclusions drawn from computational work. Most generally, our results corroborate the conclusion that C-H bond cleavage is turnover-limiting, but the experimental barrier for this bond cleavage is much lower than the calculated barrier.     

A new family of small molecules to probe the reactivation of mutant p53

Cells that express mutant p53 derived from cancers are selectively killed by a new class of small organic molecules. The protein p53 is recognized as one of the most important guardians in the body that prevents tumor development. Mutant forms of p53 are present in approximately 50% of all human cancers. Molecules that selectively kill cells expressing mutant p53 could become important chemotherapeutic agents. Our research focuses on developing a synthetically accessible class of molecules that can be easily modified to examine structural activity relationships and mechanism of biological activity or to optimize for anticancer activity. In this communication, a new class of molecules that selectively arrests growth of cells expressing two forms of mutant p53 is described. Synthetic routes to these compounds are also presented.     

Correlation of the Catalytic Activity for Oxidation Taking Place on Various TiO2 Surfaces with Surface OH Groups and Surface Oxygen Vacancies

Three catalytic oxidation reactions have been studied: The ultraviolet (UV) light induced photocatalytic decomposition of the synthetic dye sulforhodamine B (SRB) in the presence of TiO₂ nanostructures in water, together with two reactions employing Au/TiO₂ nanostructure catalysts, namely, CO oxidation in air and the decomposition of formaldehyde under visible light irradiation. Four kinds of TiO₂ nanotubes and nanorods with different phases and compositions were prepared for this study, and gold nanoparticle (Au‐NP) catalysts were supported on some of these TiO₂ nanostructures (to form Au/TiO₂ catalysts). FTIR emission spectroscopy (IES) measurements provided evidence that the order of the surface OH regeneration ability of the four types of TiO₂ nanostructures studied gave the same trend as the catalytic activities of the TiO₂ nanostructures or their respective Au/TiO₂ catalysts for the three oxidation reactions. Both IES and X‐ray photoelectron spectroscopy (XPS) proved that anatase TiO₂ had the strongest OH regeneration ability among the four types of TiO₂ phases or compositions. Based on these results, a model for the surface OH group generation, absorption, and activation of molecular oxygen has been proposed: The oxygen vacancies at the bridging O^2? sites on TiO₂ surfaces dissociatively absorb water molecules to form OH groups that facilitate adsorption and activation of O₂ molecules in nearby oxygen vacancies by lowering the absorption energy of molecular O₂. A new mechanism for the photocatalytic formaldehyde decomposition with the Au/TiO₂ catalysts is also proposed, based on the photocatalytic activity of the Au‐NPs under visible light. The Au‐NPs absorb the light owing to the surface plasmon resonance effect and mediate the electron transfers that the reaction needs.     

Utilizing Paper-Based Devices for Antimicrobial-Resistant Bacteria Detection

Antimicrobial resistance (AMR), the ability of a bacterial species to resist the action of an antimicrobial drug, has been on the rise due to the widespread use of antimicrobial agents. Per the World Health Organization, AMR has an estimated annual cost of USD 34 billion in the US and is predicted to be the number one cause of death worldwide by 2050. One way AMR bacteria can spread, and by which individuals can contract AMR infections, is through contaminated water. Monitoring AMR bacteria in the environment currently requires that samples be transported to a central laboratory for slow and labor intensive tests. We have developed an inexpensive assay using paper-based analytical devices (PADs) that can test for the presence of β-lactamase-mediated resistance. To demonstrate viability, the PAD was used to detect β-lactam resistance in wastewater and sewage and identified resistance in individual bacterial species isolated from environmental water sources.     

Manganese Detection Using Stencil‐printed Carbon Ink Electrodes on Transparency Film

Mn concentrations were determined using square‐wave cathodic stripping voltammetry (CSV) with inexpensive, stencil‐printed carbon ink electrodes generated on polypropylene transparency films. Using an optimized pH 5 ammonium acetate buffer and addition of 1,4‐benzoquinone, a detection limit as low as 500 nM (30 ppb) was achieved. Addition of 1,4‐benzoquinone improved peak potential reproducibility and height, while addition of 3.5 % w/w sodium chloride to the background solution approximately doubled the sensitivity (μA/ppm). Tolerance tests with interfering metals were conducted and the method was found to be resilient to chromium(VI), iron(III), magnesium(II), nickel(II), and zinc(II), but susceptible to aluminum(III), copper(II), iron(II), and lead(II) at concentration ratios at or below one. This technique was successfully used to measure Mn levels in yerba mate and green tea samples as an example application.     

Biaryl synthesis via palladium-catalyzed aryne multicomponent coupling

Aryl iodides have been introduced as electrophiles in the three-component Heck coupling of arynes. Following optimization studies to favor three- versus two-component coupling, the reaction proceeds in good yield to afford a variety of functionalized biaryls.     

One-pot synthesis of arylboronic acids and aryl trifluoroborates by Ir-catalyzed borylation of arenes

[reaction: see text] The synthesis of arylboronic acids and aryl trifluoroborates in a one-pot sequence by Ir-catalyzed borylation of arenes is reported. To prepare the arylboronic acids, the Ir-catalyzed borylation is followed by oxidative cleavage of the boronic ester with NaIO4. To prepare the aryltrifluoroborate, the Ir-catalyzed borylation is followed by displacement of pinacol by KHF2. These two-step sequences give products that are more reactive toward subsequent chemistry than the initially formed pinacol boronates.     

Albumin binding, relaxivity, and water exchange kinetics of the diastereoisomers of MS-325, a gadolinium(III)-based magnetic resonance angiography contrast agent

The amphiphilic gadolinium complex MS-325 ((trisodium-{(2-(R)-[(4,4-diphenylcyclohexyl) phosphonooxymethyl] diethylenetriaminepentaacetato) (aquo)gadolinium(III)}) is a contrast agent for magnetic resonance angiography (MRA). MS-325 consists of two slowly interconverting diastereoisomers, A and B (65:35 ratio), which can be isolated at pH > 8.5 (TyeklAr, Z.; Dunham, S. U.; Midelfort, K.; Scott, D. M.; Sajiki, H.; Ong, K.; Lauffer, R. B.; Caravan, P.; McMurry, T. J. Inorg. Chem. 2007, 46, 6621-6631). MS-325 binds to human serum albumin (HSA) in plasma resulting in an extended plasma half-life, retention of the agent within the blood compartment, and an increased relaxation rate of water protons in plasma. Under physiological conditions (37 degrees C, pH 7.4, phosphate buffered saline (PBS), 4.5% HSA, 0.05 mM complex), there is no statistical difference in HSA affinity or relaxivity between the two isomers (A 88.6 +/- 0.6% bound, r1 = 42.0 +/- 1.0 mM(-1) s(-1) at 20 MHz; B 90.2 +/- 0.6% bound, r1 = 38.3 +/- 1.0 mM(-1) s(-1) at 20 MHz; errors represent 1 standard deviation). At lower temperatures, isomer A has a higher relaxivity than isomer B. The water exchange rates in the absence of HSA at 298 K, kA298 = 5.9 +/- 2.8 x 10(6) s(-1), kB298 = 3.2 +/- 1.8 x 10(6) s(-1), and heats of activation, DeltaHA = 56 +/- 8 kJ/mol, DeltaHB = 59 +/- 11 kJ/mol, were determined by variable-temperature 17O NMR at 7.05 T. Proton nuclear magnetic relaxation dispersion (NMRD) profiles were recorded over the frequency range of 0.01-50 MHz at 5, 15, 25, and 35 degrees C in a 4.5% HSA in PBS solution for each isomer (0.1 mM). Differences in the relaxivity in HSA between the two isomers could be attributed to the differing water exchange rates.     

Electrochemical investigations of oligomers and polymers containing ruthenium- and iron-arene complexes

Cyclic voltammetry was employed to investigate the electrochemical behavior of numerous cyclopentadienyliron (CpFe⁺) and pentamethyl-cyclopentadienylruthenium (Cp*Ru⁺) coordinated oligomers and polymers. The electrochemical behavior of the iron systems indicated the cyclopentadienyliron complexes had isolated redox centers and that changes in the reversibility of the redox couple occurred with changes in solvent and temperature. In contrast, the monometallic ruthenium systems showed large peak separations that suggested slow kinetics on the CV timescale. The cyclic voltammograms of the larger ruthenium-containing oligomers and polymers showed multiple redox steps indicating complex electrochemical behavior.