Donor–acceptor complexes in copolymerization. XLIII. Cyclization of alternating and random styrene–(meth)acrylic ester copolymers

Equimolar alternating copolymers of styrene and methyl methacrylate (prepared with Et_1.5AlCl_1.5, SnCl₄, and ZnCl₂) as well as equimolar random copolymer were treated with polyphosphoric acid at 135°C. The extent of cyclization of the alternating copolymers was about 40%, independent of the cotacticity of the copolymer, and there was little or no crosslinking. The random copolymer underwent only 10% cyclization and considerable crosslinking. The extent of cyclization of the alternating copolymer of styrene and methyl acrylate (prepared with Et_1.5AlCl_1.5) was the same as that of the random copolymer and was lower than that of the corresponding methyl methacrylate copolymer. Both alternating and random copolymers underwent extensive crosslinking.     

Additivity of the proton affinity of polysubstituted benzenes: the ipso position

It is shown, by the MP2(fc)/6-31G^{* *}/ /HF/6-31G^* +ZPE(HF/6-31G^*) theoretical model and concomitant use of homodesmic reactions, that the ipso proton affinities in polyfluorinated benzenes follow a simple additivity rule. Performance of the latter is good, as evidenced by a low average absolute deviation Δ_abs = 0.8 kcal/mol from the accurate ab initio results. Additional evidence supporting the additivity concept is provided by good accordance with the experimental proton affinity (PA) for perfluorobenzene. The present approach enables estimates of the ipso PAs of multiply substituted aromatics. It is particularly useful in those systems which involve or atomic groupings with lone pairs of electrons proximate to the aromatic π moiety. The additivity rule of thumb offers a simple rationalization of the ipso proton affinities. The origin of the PA additivity is briefly discussed.     

Elektrophorese der halogenokomplexe von hg(ii), bi(iii), cd(ii), pb(ii) und cu(ii) : Chloro-, bromo- und jodokomplexe in kcl,hcl,kbr,hbr und kj

The electrophoretic mobilities of chloro-, bromo- and iodo-complexes of Hg, Bi, Cd, Pb, and Cu, obtained by heavy current electrophoresis on filter paper, are presented in diagrams as a function of the logarithm of the concentrations of the halogen ions KC1, HCl, KUr, HBr and KJ, mainly in concentrations between 0.1N and 4N, were selected as complexing agents Straight lines were obtuned with characteristic slopes, breaks and parallelisms. Furthermore it can be seen from the diagiarns, that the tendency to form complexes increases on the one hand in the sequence chloro - bromo -iodo, and on the other for the chloro- and bromo-complexes in the sequence Cu - Pb - Cd - Bi -Hg In the case of the lodo-complexes the sequence is (Pb + Cd) - Hg - Cu.Figures that show the electrophoretie scpartion of a mixture of Hg - Bi - Cd - Pb - Cu in Voirious concentrations of KC1, KBr and HBr, are given. The separation of these metals in the form of halogeno-complexes can be most satisfactorily accomplished in 0.5_N KBr or 0.5NHBr.     

Intriguing Differences in the Gas-Phase Dissociation Behavior of Protonated and Deprotonated Gonyautoxin Epimers

The aim of this study was to investigate the unusual gas-phase dissociation behavior of two epimer pairs of protonated gonyautoxins (GTX) following electrospray ionization in comparison to their deprotonated counterparts. The chemical structures of the investigated GTX1-4 variants vary in their substitution pattern at N-1 and the stereochemical orientation of the hydroxysulfate group at C-11 (11α for GTX1/2 versus 11β for GTX3/4). The direct comparison of mass spectra in positive and negative ion modes illustrated two distinct features: first, an intriguing difference between protonated 11α and 11β species, where 11α conformations exhibited almost complete dissociation of [M + H]⁺ ions via facile SO₃ elimination, while 11β species remained mostly intact as [M + H]⁺; and second, the lack of such differences for the deprotonated counterparts. In this study, we propose an acid-catalyzed elimination mechanism from density functional theory calculations, initiated by a proton transfer of a guanidinium proton to the hydroxysulfate group with simultaneous SO₃ release, which is only possible for the 11α conformation based on intramolecular distances. The same mechanism explains the lack of a comparable SO₃ loss in the negative ion mode. CID experiments supported this proposed mechanism for GTX1 and GTX2. Computational modeling of product ions seen in the CID spectra of GTX3 and GTX4 established that the lowest energy dissociation pathway for the 11β epimers is elimination of water with the possibility for further SO₃ release from the intermediate product. Experimental data for structurally analogous decarbamoyl gonyautoxins confirmed the evidence for the GTX compounds as well as the proposed elimination mechanisms.     

Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al₂O₃ showed the lowest WVTR value.     

Determination of chloride by stripping chronopotentiometry with silver-film electrode

The experimental parameters of cathodic stripping chronopotentiometry of chloride at a silver-film electrode are investigated and optimized. The chloride preconcentration is achieved in the form of silver chloride by a controlled potential oxidation of the working electrode under vigorous stirring. Cathodic stripping of the deposit is obtained by the constant current, under the condition of diffusive mass transfer. Deaeration of the solution is not necessary. A detection limit of 35 μ dm⁻³ (10⁻⁶ mol dm⁻³) is obtained at a deposition time of 180 s, with a reproducibility of 6.7 % (expressed as relative standard deviation, RSD).     

1,8-bis(dimethylethyleneguanidino)naphthalene: tailoring the basicity of bisguanidine "proton sponges" by experiment and theory

1,8-bis(dimethylethyleneguanidino)naphthalene (DMEGN), the second example of a peralkyl guanidine "proton sponge" based on the 1,8-naphthalene backbone, was prepared and fully characterized. The crystal structure analysis of monoprotonated DMEGN reveals an unsymmetrical intramolecular hydrogen bridge. A decrease in the basicity with respect to the noncyclic parent 1,8-bis(tetramethylguanidino)naphthalene was found. Nevertheless, a new proton sponge provides a new crossbar in the ladder of highly basic neutral organic compounds. A detailed theoretical study of DMEGN and related cyclic guanidines explains this surprising experimental result. Homodesmotic reactions reveal that the intramolecular hydrogen bond contributes effectively 10 kcal/mol to proton affinity of DMEGN.     

On the bond-stretch isomerism in the benzo[1,2:4,5]dicyclobutadiene system--an ab initio MR-AQCC study.

Bond-stretch isomerism in benzo[1,2:4,5]dicyclobutadienle (BDCB) has been investigated using the MR-AQCC/6-31G(d) method, a high-level multireference ab initio approach including size-extensivity corrections. The applied theoretical approach includes both nondynamical and dynamical electron correlation effects. Full MR-AQCC geometry optimizations of localized (1) and delocalized (3) isomers as well as the transition structure (TS) have been determined using D2h, symmetry restriction. The calculations show that both isomers are approximately of equal stability separated by a barrier with a height of about 5 kcal mol(-1). Thus, the present results strongly indicate that benzof[1,3:4,5]dicyclobutadiene is a very good candidate for an organic compound exhibiting bond-stretch isomerism, since isomers 1 and 3 correspond to true minima on the double-well potential energy surface, which are separated by a sufficiently high barrier. It is particularly important to emphasize that isomer 3 represents a realization of the highly elusive quasi-[10]annulene.     

Volatile organic compounds from Centaurium erythraea Rafn (Croatia) and the antimicrobial potential of its essential oil

GC and MS were used for the analysis of Croatian Centaurium erythraea Rafn essential oil (obtained by hydrodistillation) and headspace (applying headspace solid-phase microextraction). The headspace contained numerous monoterpene hydrocarbons (the major ones were terpinene-4-ol, methone, p-cymene, γ-terpinene and limonene). Oxygenated monoterpenes were present in the headspace and oil, while 1,8-cineole, bornyl acetate and verbenone were present only in the headspace. High headspace percentages of toluene and naphthalene were found, followed by hemimellitene. Lot of similarities were observed with Serbian C. erythraea oil [neophytadiene (1.4%), thymol (2.6%), carvacrol (6.1%) and hexadecanoic acid (5.7%)], but different features were also noted such as the presence of menthol, menthone and phytone. The oil fractionation enabled identification of other minor compounds not found in total oil such as norisoprenoides, alk-1-enes or chromolaenin. The essential oil showed antimicrobial potential on Escherichia coli, Salmonella enteritidis, Staphylococcus aureus and Bacillus cereus. On the other hand, no antibacterial activity of the oil was observed on Pseudomonas fluorescens and Lysteria monocytogenes.