Generation and reactions of substituted phenide anions in an electrospray triple quadrupole mass spectrometer

Substituted benzoic acid anions undergo decarboxylation in the medium-pressure region of an electrospray ion source yielding in most cases the correspondingly substituted phenide anions in high yield. The location of the anionic center is specified by the position of the carboxylic group. The only exceptions are compounds with substituents containing acidic hydrogen atoms, like OH and NH(2) groups. For such compounds, either an intra- or an intermolecular (mediated by the molecules of methanol or water) proton transfer from the more acidic position to the benzene ring is observed. The generated anions can be selected using the first quadrupole for studying their ion-molecule chemistry in the second quadrupole of a triple quadrupole mass spectrometer. Their reactions with CO(2), O(2), CH(3)COCH(3) and CCl(4) may serve as typical examples. The general applicability of this method for the generation of phenide anions has been confirmed on three different mass spectrometers. Experiments performed using carboxylic acids other then benzoic acid and its derivatives show that this method is not limited to phenide anions and can be used for the generation of a much wider range of carbanions in the gas phase.     

Oxygen-supplied mesoporous carbon nanoparticles for enhanced photothermal/photodynamic synergetic therapy against antibiotic-resistant bacterial infections

Pandemic and epidemic spread of antibiotic-resistant bacterial infections would result in a huge number of fatalities globally. To combat antibiotic-resistant pathogens, new antimicrobial strategies should be explored and developed to confront bacteria without acquiring or increasing drug-resistance. Here, oxygen saturated perfluorohexane (PFH)-loaded mesoporous carbon nanoparticles (CIL@ICG/PFH@O₂) with photothermal therapy (PTT) and enhanced photodynamic therapy (PDT) utility are developed for antibacterial applications. Ionic liquid groups are grafted onto the surface of mesoporous carbon nanoparticles, followed by anion-exchange with the anionic photosensitizer indocyanine green (ICG) and loading oxygen saturated PFH to prepare CIL@ICG/PFH@O₂. These CIL@ICG/PFH@O₂ nanoparticles exhibit effective PTT and enhanced PDT properties simultaneously upon 808 nm light irradiation. In vitro assays demonstrate that CIL@ICG/PFH@O₂ shows a synergistic antibacterial action against antibiotic-resistant pathogens (methicillin-resistant Staphylococcus aureus and kanamycin-resistant Escherichia coli). Moreover, CIL@ICG/PFH@O₂ could effectively kill drug-resistant bacteria in vivo to relieve inflammation and eliminate methicillin-resistant Staphylococcus aureus-wound infection under NIR irradiation, and the released oxygen can increase collagen deposition, epithelial tissue formation and blood vessel formation to promote wound healing while enhancing the PDT effect. This study proposes a platform with enhanced PTT/PDT effects for effective, controlled, and precise treatment of topical drug-resistant bacterial infections.

We report oxygen saturated perfluorohexane (PFH)-loaded mesoporous carbon nanoparticles (CIL@ICG/PFH@O₂) with photothermal therapy (PTT) and enhanced photodynamic therapy (PDT) utility for antibacterial applications.     

一种新的Eu3+配合物有机薄膜电致发光

自从C. W. Tang[1]百次发表高效、高亮度双层结构有机薄膜电致发光(EL)器件以来,由于其驱动电压低、可做成大面积及制作工艺简单等优点,使其在平板显示和显像领域具有巨大应用潜力而成为研究热点.可是大多数有机小分子和聚合物材料制作的有机薄膜电致发光器件的发射光谱谱带很宽,半高宽一般在100nm-200nm,色纯度不好,不利于显示和显像.于是寻找场致发光谱带窄、亮度高的有机材料就显得非常重要.     

与象电荷有关的能量和互作用力问题

指出与象电荷有关的系统的互能、互作用力和真实电荷系统的互能、互作用力分别相等,自能、有一般分别不等。     

含螺旋单元频率选择表面的宽频带强吸收复合吸波体

设计和制备了含螺旋单元频率选择表面吸波片的三层复合吸波体,上层和下层均为磁性吸波片,中间层为带缺口的螺旋单元频率选择表面.复合吸波体在总厚度分别为1.4,1.7和2.0 mm时,其反射率在-10d B以下的频带宽度分别达到了9.29,6.69和7.11 GHz,与不含有频率选择表面的吸波体相比较(其他参数相同),-10d B以下反射率带宽分别提高了159.5%,69.3%和129.4%,复合吸波体在总厚度低于吸波体时,也取得了更好的反射效果.带缺口圆螺旋单元的频率选择表面嵌入吸波体中,引入了额外的吸收频带,拓宽了吸波体的反射率频带宽度.仿真分析表明嵌入频率选择表面能够改善吸波体的阻抗匹配性,进而影响其反射率.     

列车编组中越“标”预警系统的逻辑设计

本文以列车编组时存在的越“标”问题为例，讨论了越“标”预警系统所需要的逻辑开关网络，并以此网络为基础，设计了整个预警电路系统，调试结果表明设计方法合理、可行.     

含有源频率选择表面可调复合吸波体

基于传输线等效理论,设计了含有源频率选择表面(active frequency selective surface,AFSS)的三层可调复合吸波体,第一层是表面层,为AFSS衬底;中间层是AFSS层,由频率选择表面(frequency selective surface,FSS)和PIN二极管阵列构成;第三层是介质层.反射率测量结果表明,通过调节PIN二极管阵列偏置电压可以动态调节吸波体反射特性,在偏置电压为5 V时,可获得最佳吸波性能,在5—15 GHz和5.3—13 GHz频段分别可获得-8 dB和- 关键词： 频率选择表面 复合吸波材料 反射率 PIN二极管     

NiZnCu ferrite applied for LTCC microinductor

This paper describes the fabrication of thin magnetic layers for an LTCC planar-type inductor with a 0.11 mm thickness. The thin ferrite layers were fabricated by tape casting method. Synthesis conditions and X-ray analysis (300 K) of the Ni_0.3Zn_0.62Cu_0.08Fe₂O₄ ferrite are presented. A pure cubic, Fd 3m crystal structure was observed for the Ni_0.3Zn_0.62Cu_0.08Fe₂O₄ ferrite. The complex impedance and dielectric permittivity of Ni_0.3Zn_0.62Cu_0.08Fe₂O₄ ferrite were determined as a function of temperature (from −55 to 170 °C) and frequency (from 10 Hz to 2 MHz). Dc resistivity was measured in a temperature range from −55 to 170 °C. Magnetization and magnetic hysteresis were measured by a vibrating sample magnetometer (VSM) in an applied magnetic field up to 60 kOe. The inductance and quality factor were measured in a frequency range 0.1-120 MHz. With the help of finite elements method (FEM) simulation it is possible to calculate the elements electrical parameters and optimize the design. This paper presents a magnetic field modelling of an inductor structure.