缓冲层ZnPc对有机电致发光器件特性的影响

本文研究了酞菁锌(ZnPc)薄膜的表面形貌及ZnPc薄膜作为缓冲层对有机电致发光器件(OLEDs)光电特性的影响.对比两组样品的AFM图像,ZnPc薄膜相比于ITO薄膜,其表面的岛面积较大,薄膜表面更连续平整,基本上覆盖了ITO膜表面针孔,减少了表面的缺陷.另外,ZnPc薄膜的岛分布均匀有序.使用ZnPc作为缓冲层的器件性能明显好于未使用ZnPc修饰的器件,在7.42V的驱动电压下的最大发光亮度达到1.428kcd/m2,在4.3V电压驱动下时,最大光功率效率为1.411m/W;而未使用缓冲层的器件在8V的驱动电压下达到最大发光亮度达到1.212kcd/m2,在5.5V电压驱动下时,最大光功率效率为0.931m/W.     

Observation of superstructure formation on Rh{001} by laser-pulse assisted field evaporation

Pulsed-laser assisted field evaporation of the Rh{001} plane produces a p(2 × 2) structure. This structure can be destroyed by pulsed-laser heating the surface in the absence of an applied field, and can be restored to near perfection if the pulsed-laser heating is done in an applied field of 3 to 4 $\text{V}\text{A}\text{?}$. The degree of order increases with the applied electric field. The observed p(2 × 2) surface is therefore a field stabilized structure.     

Current Reversal Due to Coupling Between Asymmetrical Driving Force and Ratchet Potential

Transport of a Brownian particle moving in a periodic potential is investigated in the presence of an asymmetric unbiased external force. The asymmetry of the external force and the asymmetry of the potential are the two ways of inducing a net current. It is found that the competition of the spatial asymmetry of potential with the temporal asymmetry of the external force leads to the phenomena like current reversal. The competition between the two opposite driving factors is a necessary but not a sufficient condition for current reversals.     

Understanding Symmetric and Asymmetric DNA Patterns by Water Flow on a Solid Surface

In order to use DNA for making molecular device, specific DNA patterns on a solid surface should be constructed. In this paper, we will show that the random interactions between the DNA segments and the solid surface play an important role in the final symmetric and asymmetric DNA patterns obtained by water flow.     

电容应变式压力传感器原理及检测电路设计

论述了电容应变式压力传感器的原理，给出了一种电容应变式压力传感器的电路，并分析了压力大小与电路输出电压之间的关系。     

超细激光束准直器设计的新数学模型

为了获取长距离超细激光束，采用几何能量守恒法设计出一种衍射光学元件，推导出高斯光入射时衍射光学元件位相函数。根据建立的数学模型，设计超细激光束准直器，并模拟高斯光入射时出射激光束的光斑形状及光强分布，最后计算了能量利用率。     

伴随有水蒸气凝结的烟气对流换热的实验研究

本文通过实验研究了冷凝式燃气热水器中烟气伴随有水蒸气凝结的受迫对流换热过程。着重介绍实验系统、测试方法和对塔板式换热器和肋片板式换热器的实验研究结果。实验表明,有水蒸气凝结时的烟气对流换热系数远大于无凝结时的换热系数,可提高数倍。在冷凝式换热器中,塔板式换热器的换热系数大于肋片板式换热器。     

A Novel Fabrication Technique of Long Period Fiber Gratings

１ＩｎｔｒｏｄｕｃｔｉｏｎＳｉｎｃｅｔｈｅｄｉｓｃｏｖｅｒｙｏｆｐｈｏｔｏｓｅｎｓｉｔｉｖｉｔｙｉｎｇｅｒｍａｎｏｓｉｌｉｃａｔｅｏｐｔｉｃａｌｆｉｂｅｒｓｂｙＨｉｌｅｔａｌ．ｉｎ１９７８［１］，ｓｉｇｎｉｆｉｃａｎｔｐｒｏｇｒｅｓｈａｓｂｅｅｎｍａ...     

Quantum Anti-Zeno Effect in Artificial Quantum Systems

In this paper, we study a quantum anti-Zeno effect （QAZE） purely induced by repetitive measurements for an artificial atom interacting with a structured bath. This bath can be artificially realized with coupled resonators in one dimension and possesses photonic band structure like Bloeh electron in a periodic potential. In the presence of repetitive measurements, the pure QAZE is discovered as the observable decay is not negligible even for the atomic energy level spacing outside of the energy band of the artificial bath. If there were no measurements, the decay would not happen outside of the band. In this sense, the enhanced decay is completely induced by measurements through the relaxation channels provided by the bath. Besides, we also discuss the controversial golden rule decay rates originated from the van Hove＇s singularities and the effects of the counter-rotating terms.     

脱粘缺陷对粘接结构频散特性的影响

采用全局矩阵理论,通过引入内聚强度弱化模型和弹簧模型,计算了脱粘缺陷对粘接结构频散特性的影响。分析了内聚强度缺陷、界面缺陷及混合缺陷等因素对粘接结构频散特性的影响,发现频散曲线的演化规律与材料声学性质密切相关。不同材料和不同组合,其规律有很大不同。针对各向同性粘接结构,可能通过考察特定频率段内频散模态的变化,实现对脱粘缺陷的检测。