Crosslinking network of bio‐based bis‐functional epoxides derived from trans‐limonene oxide

The thiol‐ene reaction between trans‐limonene oxide (trans‐LO) and ethane‐1,2‐dithiol in the presence of triethylborane affords a bio‐based bis‐functional epoxide (bis‐trans‐LO). The crosslinking reaction of bis‐trans‐LO with branched polyethyleneimine (BPEI; M_n = 600; BPEI₆₀₀) at a feed ratio of bis‐trans‐LO/BPEI₆₀₀ = 57/43 (wt/wt) yields the corresponding network polymer with T_d10 (10% thermal decomposition temperature) of 304.7 °C in 98% yield. In contrast, negligible amounts of network polymer are obtained by the reaction of bis‐LO (bis‐functional epoxide derived from cis and trans‐LO) and BPEI₆₀₀ regardless of the feed ratio. The mechanical strengths as measured by direct tensile tests of the network polymers derived from bis‐trans‐LO and BPEI_600,1800 (M_n = 600 and 1800) were approximately 16 and 11 times higher than that of bis‐LO and BPEI₁₈₀₀, respectively. The tensile shear strengths of the metal‐to‐metal adhesive bonds induced by bis‐trans‐LO and BPEI_600,1800 were 9.5 and 14.1 MPa, respectively. DMA revealed that the storage modulus of the network polymer derived from bis‐trans‐LO and BPEI₁₈₀₀ in the rubber region was higher than that of the material prepared from bis‐LO and BPEI₁₈₀₀, indicating higher crosslink density of the bis‐trans‐LO/BPEI₁₈₀₀ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2466–2473     

Multimode optical fiber demultiplexer-star coupler using a single gradient-index-rod lens and a multi-facet grating

An optical fiber multi-function device consisting of a single gradient-index-rod lens and a multi-facet blazed reflection grating is proposed to simultaneously realize functions of wavelength demultiplexing and optical signal distribution in a multimode optical fiber transmission system. We analyzed the demultiplexing characteristics and the tolerance of optical components using the ray trace method. This device can realize not only low loss optical signal distribution but also offers improved demultiplexing characteristics in comparison with the previously proposed demultiplexer-multiposition switch. The following characteristics are expected from the design using commercially available optical components: a working band of 0.64–0.88 μm, channel separation of 34–36 nm, 3 dB bandwidth of 27–28 nm, channel cross-talk of less than - 40 dB and minimum excess insertion loss of 0.9–2.1 dB.     

THE DESIGNS OF HIGH EFFICIENCY LAUNCHER OF QUASI-OPTICAL MODE CONVERTER FOR HIGH POWER GYROTRONS

A high efficiency launcher of quasi-optical (QO) mode converters for high power gyrotrons have been designed and tested. A helical cut launcher radiates the RF power via its straight cut onto the first phase correcting mirror. The launchers have been optimized for the TE_31.8 mode at 170 GHz and TE_22.6 mode at 110 GHz by numerically optimizing a launcher surface. The helical cut of the launcher has been optimized by taking the taper angle into account. Further more, the amplitude of the surface perturbation have been optimized for improved focusing in order to reduce the diffraction losses at the helical cut. Low power measurement shows a good agreement with the design. High efficiency characteristics of the design have also been calculated on the assumption of frequency downshift due to the thermal expansion of the cavity and stepwise frequency tuning by changing the operating mode. Besides, the possibility of high efficiency launcher for higher mode is discussed, and these results give the prospect to high efficiency long pulse gyrotrons.     

Optimized Pump Power Ratio on 2nd Order Pumping Discrete Raman Amplifier

By optimizing pump power ratio between 1st order backward pump and 2nd order forward pump on discrete Raman amplifier, we demonstrated over 2dB noise figure improvement without excessive non-linearity degradation.     

Photo-Absorption and photochemical decomposition of copper and alkaline-earth ß-diketonates as source gases of high-Tc superconducting films

For low-temperature deposition of oxide films relating to Bi-Sr-Ca-Cu-O superconductors, photo-absorption and -decomposition properties were examined with respect to copper and alkaline-earth ß-diketonates. It was confirmed that all ß-diketonates examined were promising as source materials for photochemical vapour deposition (photo-CVD) using a low-pressure mercury lamp, in view of their large light absorption coefficients at wavelength 254 nm. The light irradiation was effective for the formation of highly crystalline oxide films at temperatures below 600 °C. By combining two sources, Ca₂CuO₃ and SrCuO₂ films were prepared. Photo-CVD of c-axis oriented Bi₂Sr₂CuO_x film was achieved by the irradiation of ternary sources of Bi(C₆H₅)₃ and strontium and copper ß-diketonates at 500 °C.     

A fully linear-time approximation algorithm for grammar-based compression

A linear-time approximation algorithm for the grammar-based compression is presented. This is an optimization problem to minimize the size of a context-free grammar deriving a given string. For each string of length n, the algorithm guarantees approximation ratio without suffix tree construction.