Developing a hybrid emulsion polymerization system to synthesize Fe3O4/polystyrene latexes with narrow size distribution and high magnetite content

A hybrid emulsion polymerization was formulated for synthesizing Fe₃O₄/polystyrene composite latex. This system, containing binary droplets that are magnetic (Mag)‐droplets with a diameter of 100–200 nm and styrene (St)‐droplets with a diameter of 3–4 μm, was obtained by mixing Mag‐miniemulsion and St‐macroemulsion. With extremely low surfactants concentration (?critical micelle concentration, CMC), the nucleated loci are selectively controlled in the Mag‐droplets, as the result of smaller droplet size and larger surface ratio. Both water‐soluble potassium persulfate (KPS) and oil‐soluble 2,2′‐azobis(2‐isobutyronitrile) was adopted to initiate the polymerization. In the presence of KPS, magnetic polystyrene latices with particles size of 60–200 nm, narrow size distribution, and high magnetite content (86 wt % measured by TGA) were attained successfully. The synthesized magnetic Fe₃O_4/polystyrene latices assembled into well‐ordered hexagonal structure in the surface of a carbon supported copper grid. The influence of various parameters on various aspects of the as‐synthesized Fe₃O₄/polystyrene was investigated in detail: type of initiator on composite morphology, feed ratio of Mag‐miniemulsion and St‐macroemulsion on magnetite content, and hydrophobic agent or amount of surfactant on size and size distribution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5285–5295, 2007     

Argon sorption and partial molar volume in poly(ethyl methacrylate) above and below the glass transition temperature

Sorption and dilation isotherms for argon in poly(ethyl methacrylate) (PEMA) are reported for pressures up to 50 atm over the temperature range 5–85°C. At temperatures below the glass transition (T_g=61°C), sorption isotherms are well described by the dual-mode sorption model; and isotherms above T_g follow Henry's law. However, isotherms for dilation due to sorption are linear in pressure at all temperatures over the range investigated. Partial molar volumes of Ar in PEMA are obtained from these isotherms. The volumes are approximately constant above T_g (about 40 cm³/mol), whereas the volumes below T_g are smaller and dependent on both temperature and concentration (19–26 cm³/mol). By analyzing the experimental data according to the dual-mode sorption and dilation model, the volume occupied by a dissolved Ar molecule and the mean size of microvoid in the glass are estimated to be 67 129 ų, respectively. The cohesive energy density of the polymer is also estimated as 61 cal/cm³ from the temperature dependence of the dual-mode parameters.     

Application of total reflection X-ray fluorescence spectrometry to small glass fragments.

Total reflection X-ray fluorescence spectrometry (TXRF) has been applied for trace elemental analysis of small glass fragments. A small glass sample (a fragment with weight less than 0.5 mg) was decomposed by 100 microg of HF/HNO3 acid; the material was condensed to 10 microl and was dried on a Si wafer. Since the size of the dried residue on the Si wafer was less than 1 cm in diameter, an incident X-ray beam with about 1 cm in width could effectively excite elemental components in such a small glass fragment. The precision of the present technique was checked by analyzing the glass fragments (<0.5 mg) from NIST SRM612; the relative standard deviations (RSD) of less than 8.1% were achieved for elemental ratios that were normalized by Sr. Fragments (<0.5 mg) obtained from 23 figured sheet glasses were used as samples for estimating the utility of this technique to forensic discrimination. Comparison of five elemental ratios of Ti/Sr, Mn/Sr, Zn/Sr, Rb/Sr, and Pb/Sr calculated from X-ray fluorescence spectra was effective in distinguishing glass fragments that could not be differentiated by their refractive indexes (RI).     

Electromagnetophoretic force measurement of a single binding interaction between lectin and yeast cell surfaces.

A novel measurement method of the binding force between a micrometer-sized particle and a solid surface in an electrolyte solution has been established by using the electromagnetophoretic buoyancy on the particle. By this method, we investigated the binding force between a yeast cell surface and an oligosaccharide-binding protein, concanavalin A (Con A), fixed on a silica capillary wall. The force measurement was carried out up to 60 pN. In a lower surface concentration of Con A, yeast cells could be desorbed by a force less than 60 pN. However, in a higher surface concentration after treated by 1 mg ml(-1) solution, yeast cells were adsorbed with a force stronger than 60 pN. In this case, the addition of 10 mg ml(-1) D-mannose solution to the medium reduced the binding force to less than 60 pN. The observed adsorption force of yeast cells ranged within 30 - 40 pN, regardless of the interfacial amount of Con A. This force was thought to be the single binding force between a mannose group of the cell surface and an active site of Con A. Moreover, the dissociation rate constant of the single binding of yeast cell and Con A complex was determined as 4.6 x 10(-3) s(-1) and the increment of the binding distance at the transition state as 0.33 nm from the desorption kinetic experiments of yeast cell under the constant pulling conditions of 10, 20 and 30 pN. Such satisfactory results demonstrate the novel advantages of the present method.     

Approximation of transient temperatures in complex geometries using fractional derivatives

It is shown that time-dependent temperatures in a transient, conductive system can be approximately modeled by a fractional-order differential equation, the order of which depends on the Biot number. This approximation is particularly suitable for complex shapes for which a first-principles approach is too difficult or computationally time-consuming. Analytical solutions of these equations can be written in terms of the Mittag-Leffler function. The approximation is especially useful if a suitable fractional-order controller is to be designed for the system.     

Synthesis of poly-yne polymers containing transition metals,disilane, disiloxane and phosphine groups in the main chain

The synthesis and characterization of metal poly-yne polymers containing disilane, disiloxane and phosphine groups in the main chain are described. The platinum and palladium poly-yne polymers were synthesized by polycondensation reactions between a metal chloride and an α, ω-bisethynyl complex in amines in the presence of cuprous iodide as a catalyst. The nickel poly-yne polymers were synthesized by an alkynyl ligand exchange reaction between a nickel acetylide and an α, ω-bisethynyl complex in diethylamine in the presence of cuprous iodide as a catalyst. The reaction of the platinum poly-yne polymer, containing disiloxane groups in the main chain, with copper (I) salts afforded adducts of η-²-bonded σ-acetylide polymer complexes. The reactions of the palladium poly-yne polymer, containing phosphine groups in the main chain, with transition-metal carbonyl complexes afforded polymer complexes which have phosphorus in the main chain-transition-metal bonds. A concentrated solution of the platinum poly-yne polymer containing disiloxane groups in the main chain forms a lyotropic liquid crystal in dichloromethane or 1, 2-dichloroethane.     

Gas Chromatographic Separation of Carbonyl Compounds as Their 2,4-dinitrophenylhydrazones Using Glass Capillary Columns

The gas chromatographic separation of 22 carbonyl compounds as their 2,4-dinitrophenylhydrazones was investigated using glass capillary columns. Complete separation of the 2,4-dinitrophenylhydrazones of ten aliphatic aldehydes, eight aliphatic ketones and four aromatic aldehydes was obtained, except for the derivatives of n-valeraldehyde and isobutyl methyl ketone, whose peaks overlapped, and the o- and m-tolualdehyde derivatives, which were poorly separated. The optimum conditions were as follows: stationary phase, SF-96; column size, 20 m × 0.25 mm I.D. ; column temperature, 200-240°; injection and detector temperatures, 280-290°; carrier gas flow-rate, helium 1.0-1.2 ml/min or nitrogen 1.1-1.2 ml/min. The method was applied to the analysis of aliphatic carbonyl compounds in car exhaust fumes and cigarette smoke.     

Polymerization of methacrylates. I. Polymerization reactivity of picryl methacrylate

The polymerization of picryl (PMA), 2,4-dinitrophenyl (2,4-DNMA),2,6-dinitrophenyl (2,6-DNMA), 2-methyl-4,6-dinitrophenyl (MDNMA), and 2,6-dimethylphenyl methacrylates (DMMA) was carried out in benzene at 60°C. PMA, 2,6-DNMA, and MDNMA did not undergo radical homopolymerization, while 2,4-DNMA and DMMA did. The results suggest that the growing radical readily attacks the oxygen atom of the nitro group at the 2 position of the terminal phenyl group due to the steric effect of the substituent at the 6 position, resulting in chain termination. PMA formed a charge-transfer complex with 2-naphthyl methacrylate (NMA). The stoichiometric composition of this complex was shown to be 1:1 molar complex. PMA was readily copolymerized with NMA. The amount of solvent affected the composition of the copolymer obtained at a given same mole fraction in feed. The results suggest that charge-transfer interaction between the ester groups affects the copolymerization mechanism.     

Cu(I) catalyst in DMF: an efficient catalytic system for the synthesis of furans from 2-(1-alkynyl)-2-alken-1-ones

The cyclization of 2-(1-alkynyl)-2-alken-1-ones 1 proceeded very smoothly in the presence of alcohols 2 with a catalytic amount of Cu(I)Br in DMF at 80 degrees C, leading to the formation of highly substituted furans 3. The catalytic system reported herein is easy to handle, compared to the previously known system wherein the reaction between 1 and 2 needed to use moisture sensitive gold(III) chloride.