The polar ionosphere at Zhongshan station on May 11, 1999, the day the solar wind almost disappeared

The solar wind almost disappeared on May 11, 1999: the solar wind plasma density and dynamic pressure were less than 1cm⁻³ and 0.1 nPa respectively, while the interplanetary magnetic field was northward. The polar ionospheric data observed by the multi-instruments at Zhongshan Station in Antarctica on such special event day was compared with those of the control day (May 14). It was shown that geomagnetic activity was very quiet on May 11 at Zhongshan. The magnetic pulsation, which usually occurred at about magnetic noon, did not appear. The ionosphere was steady and stratified, and the F₂ layer spread very little. The critical frequency of day-side F₂ layer, f₀F₂, was larger than that of control day, and the peak of f₀F₂ appeared 2 hours earlier. The ionospheric drift velocity was less than usual. There were intensive auroral E_s appearing at magnetic noon. All this indicates that the polar ionosphere was extremely quiet and geomagnetic field was much more dipolar on May 11. There were some signatures of auroral substorm before midnight, such as the negative deviation of the geomagnetic H component, accompanied with auroral E_s and weak Pc3 pulsation.

     

Measurement of the Seperation between Atoms beyond Diffraction Limit

We propose a scheme to obtain the distance of two identical atoms placed inside the standing wave field by monitoring the collective resonance fluorescence spectrum emitted by the two particles. We find three different parameter ranges, depending on the distance of the atoms as compared to the transition wavelength. For large interparticle distances, dipole-dipole coupling is negligible, and the main system evolution arises from the interaction with the standing wave field. In the small-distance limit, the dynamics is dominated by the dipole-dipole interaction. Finally, in the intermediate region, a rich interplay of the various couplings arises, which however is lifted for strong driving laser fields. The present measurement procedure allows us to distinguish the three cases. In each of the cases, we show how to determine the distance of the two particles and their respective positions relative to the nodes of the standing wave field with fractional-wavelength precision.     

Attractors and Dimensions for Discretizations of a Dissipative Zakharov Equations

Abstract In this paper, a dissipative Zakharov equations are discretized by difference method.We make priorestimates for the algebric system of equations. It is proved that for each mesh size,there exist attractors forthe discretized system.The bounds of the Hausdorff dimensions of the discrete attractors are obtained,and thevarious bounds are dependent of the mesh sizes.     

光纤白光干涉仪等臂长技术研究

介绍了几种光纤干涉仪等臂长技术,比较了各自的优缺点和适用范围,对光纤干涉仪的平衡有较大的参考价值。     

Two modifications of the least cost per period heuristic for dynamic lot-sizing

This paper proposes two constructive heuristics for the well-known single-level uncapacitated dynamic lot-sizing problem. The proposed heuristics, called net least period cost (nLPC) and nLPC(i), are developed by modifying the average period cost concept from Silver and Meal's heuristic, commonly known as least period cost (LPC). An improved tie-breaking stopping rule and a locally optimal decision rule are proposed in the second heuristic to enhance performance. We test the effectiveness of the proposed heuristics by using 20 benchmarking test problems frequently used in the literature. Furthermore, we perform a large-scale simulation study involving three factors, 50 experimental conditions, and 100?000 randomly generated problems to evaluate the proposed heuristics against LPC and six other well-known constructive heuristics in the literature. The simulation results show that both nLPC and nLPC(i) produce average holding and setup costs lower than or equal to those of LPC in every one of the 50 experimental conditions. The proposed heuristics also outperform each of the six other heuristics evaluated in all experimental conditions, without an increase in computational requirements. Lastly, considering that both nLPC and nLPC(i) are fairly simple for practitioners to understand and that lot-sizing heuristics have been commonly used in practice, there should be a very good chance for practical applications of the proposed heuristics.     

SiOx纳米管的制备及其发光特性

以液态金属镓为媒介,利用热蒸发法合成大量非晶SiOx纳米管,这些纳米管管径均匀分布,平均约80 nm,长度大于10μm,且管内外径比例较小．分析发现,在实验过程中,熔入金属镓液滴中的硅元素和氧元素结合并从液滴的表面饱和析出,形成以镓为中心的非晶SiOx纳米管状结构．在室温中,利用260 nm的激发光源激发SiOx纳米管,发现在蓝光波段附近发出强而稳定的PL谱线,这可能与样品中的氧缺陷和空位有关．     

Fiber-optic reflex sensor for in-line production measurement

The paper describes experiments concerning distance measurement with fiber-optic sensor and improvement of the measurement principle. The sensor probe was well-designed with a small structure and multi-function. The novel optical fiber probe arrangement as well as the possibilities of use for complex measurement problems are explained using the measurement of an internal screw thread as an example. The experimental results show that the measurement uncertainty of the thread minor diameter can reach ±10 μm, and the stability of the measurement system is better than 0.07%.     

Time-domain numerical computation of noise reduction by diffraction and finite impedance of barriers

A new time-domain numerical method is presented for the estimation of noise reduction by the diffraction and finite impedance of barriers. High order finite difference schemes conventionally used for computational aeroacoustics, and time-domain impedance boundary conditions are utilized for the development of the time-domain method. Compared with other methods, this method can be applied more easily to the problems related to nonlinear noise propagation such as impulsive noise and broadband noise. Linearized Euler equations in Cartesian co-ordinates are considered and solved numerically. Straight and T-shaped barriers with and without surface admittance are calculated. In order to assess the accuracy of this time-domain method, comparison with the results of SYSNOISE software (Ver. 5.3) are made. There are very good agreements between the results of the present time-domain numerical method and the boundary element method of the SYSNOISE software.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

Crystallographic report: Bis{[diacetyl‐bis(2,6‐isopropylphenylimine)]nickel(I)(µ‐chloro)}

The first α‐diimine nickel(I) complex having a chloro bridge is reported. The centrosymmetric dinuclear structure of {[ArN?C(Me)C(Me)?NAr]NiCl}₂[Ar?2,6?C₆H₃(i‐Pr)₂] features two chelating α‐diimine ligands and two bridged chlorine atoms, so that a distorted tetrahedral N₂Cl₂ coordination geometry for nickel results. Copyright © 2004 John Wiley & Sons, Ltd.