“受阻路易斯酸碱对”催化的2,3-二取代2H-1,4-苯并噁嗪氢化反应机理研究

在受阻路易斯酸碱对（FLPs）催化的2，3-二取代2H-1，4-苯并噁嗪氢化反应中，3号位取代基不同会导致反应效率极大改变，因此我们选取反应活性具有较大差别的三种底物作为模型化合物对其反应机理进行了研究，建立了氢化反应势能面.发现当B（C₆F₅）₃与2，3-二苯基2H-1，4-苯并噁嗪或2-甲基-3-苯基2H-1，4-苯并噁嗪混合后，会形成FLPs与路易斯酸碱加合物的混合物.而将B（C₆F₅）₃与2，3-二甲基2H-1，4-苯并噁嗪混合后主要形成没有催化活性的路易斯酸碱加合物，因其能量低于FLPs，在催化体系中不容易转化为FLPs，这导致三种模型化合物在FLPs催化的氢化反应中效率不同.进一步的取代基电子效应及位阻效应计算表明：B（C₆F₅）₃与2-甲基-3-取代2H-1，4-苯并噁嗪混合后形成的路易斯酸碱加合物和FLPs化合物之间稳定性差别源于3位取代基空间位阻不同.     

溶胶凝胶法合成LiCuVO4及其电化学性能研究

以CH3COOLi.2H2O、Cu(NO3)2.3H2O、V2O5和双氧水(30%)为原料,采用溶胶凝胶法合成了LiCuVO4,其结构、组成和形貌经XRD和SEM确认。结果表明,本文所合成的LiCuVO4具有隧道结构的形貌,颗粒粒径为0.2～6μm。将LiCuVO4作为锂离子电池正极材料,首次循环的放电比容量达到160mAh/g;而作为负极材料,其最大放电比容量达到481mAh/g。在两种电化学测试中,LiCuVO4都显示了良好的循环性能。     

Enhanced Thermal Decomposition Properties and Catalytic Mechanism of Ammonium Perchlorate over CuO/MoS2 Composite

In this report, CuO/MoS₂ composites were successfully prepared by the hydrothermal method where nano‐sized CuO was uniformly distributed on the surface of hierarchical MoS₂ substrates (CuO/MoS₂ composites). Their physicochemical properties and catalytic performance in ammonium perchlorate (AP) decomposition were investigated and characterized by XRD, SEM, TEM, BET, XPS, TG/DSC and combustion measurement. The results showed that it could decrease AP decomposition temperature at high decomposition stage from 416.5 °C to 323.5 °C and increase the heat release from 378 J/g (pure AP) to 1340 J/g (AP with catalysts), which was better than pure CuO nanoparticles (345.5 °C and 1046 J/g). Meanwhile, it showed excellent performance in combustion reaction either in N₂ or air atmosphere. The results obtained by photocurrent spectra, photoluminescence spectra and time‐resolved fluorescence emission spectra indicated that loading CuO mediated the generation rate and combination rate of electrons and holes, thus tuning the catalytic performance on AP decomposition. This study proved that employing the supports that can synergistically interact with CuO is an efficient strategy to enhance the catalytic performance of CuO.     

新型吡唑联吡咯类杂环化合物的合成及杀菌活性

为寻找具有更高生物活性、更环保的新农药杀菌剂,基于杀菌剂氟咯菌腈设计并合成了10个新型吡唑联吡咯类杂环化合物,以吡唑环代替氟咯菌腈上原有的苯环,以期提高其杀菌活性.采用1H NMR,FTIR,单晶X射线衍射、元素分析和熔点测定等测试手段对目标化合物及其中间体的结构进行了表征与确认,并通过挥发法培养得到了6个目标化合物的单晶.还对其中6个化合物进行了生物活性测试,测试结果表明各化合物对水稻纹枯病、黄瓜灰霉病、黄瓜霜霉病均表现出一定的抑菌效果,可作为先导化合物对其结构进行深入的研究,为新农药杀菌剂的开发提供了理论支持.     

Spatiotemporally-regulated multienzymatic polymerization endows hydrogel continuous gradient and spontaneous actuation

There are several natural materials which have evolved functional gradients,ingeniously attaining maximal efficacy from limited components.Herein,we utilized the spatiotemporal distribution of initiator acetylacetone to regulate the multienzyme polymerization and fabricate a chitosan-polymer hydrogel.The temporal priority order of acetylacetone was higher than phenolmodified chitosan by density functional theory calculation.The acetylacetone within the gelatin could gradually diffuse spatially into the chitosan hydrogel to fabricate the composite hydrogel with gradient network structure.The gradient hydrogel possessed a transferring topography from the two-dimensional pattern.A continuously decreased modulus along with acetylacetone diffusion was confirmed by atomic force microscope-based force mapping experiment.The water-retaining ability of various regions was confirmed by low-field nuclear magnetic resonance(NMR)and thermogravimetric analysis(TG)analysis,which led to the spontaneous actuation of gradient hydrogel with maximum 1821°/h curling speed and 227°curling angle.Consequently,the promising gradient hydrogels could be applied as intelligent actuators and flexible robots.     

保单个数为Poisson分布的总理赔额分布函数的界值研究

根据单个保单理赔额分布函数F(z)的一些特殊性质,研究了开放个别风险模型在保单个数N为Poisson分布下,总理赔额分布函数F_S(x)对任意x(x≥0)的界值问题,得到一些实用的、便于数值计算的界值结果,具有重要的应用价值．     

A methodology for structural health monitoring with diffuse ultrasonic waves in the presence of temperature variations

Diffuse ultrasonic waves for structural health monitoring offer the advantages of simplicity of signal generation and reception, sensitivity to damage, and large area coverage; however, there are the serious disadvantages of no accepted methodology for analyzing the complex recorded signals and sensitivity to environmental changes such as temperature and surface conditions. Presented here is a methodology for applying diffuse ultrasonic waves to the problem of detecting structural damage in the presence of unmeasured temperature changes. This methodology is based upon the prediction and observation that the first order effect of a temperature change on a diffuse ultrasonic wave is a time dilation or compression. A multi-step procedure is implemented to (1) record a set of baseline waveforms from the undamaged specimen at temperatures spanning the expected operating range, (2) select a waveform from the baseline set whose temperature is the closest to that of a subsequently measured signal, (3) adjust this baseline waveform to best match the signal, and (4) calculate an error parameter between the signal and the adjusted waveform and compare this parameter to a threshold to determine the structural status. This procedure is applied to experimental data from aluminum plate specimens with artificial flaws. Probability of detection and the minimum flaw size detected are presented as a function of the size of the baseline waveform set. It is shown that a probability of detection of over 95% can be achieved with a small number of baseline waveforms.     

STUDY ON THE BLOOD FAT REGULATION OF THE FUCOIDA—GALACTOSAN SULFATE（FGS） FROM LAMINARIA JAPONICA

FGS was isolated and purified from laminaria japonica by enzymolysis,chromatography methods and so on.The high blood fat model was established by feeding mouse on high fat feedstuff.Compared with control group,the concentration of HDL-C.the ratio of HDL-C.TC increased.while the concentration of TC,LDL-C and TG decreased in experimental groups,Conclusion:FGS was an effective serum lipid regulator and can be developed as medicine and health food.     

Removal of dust from flue gas in magnetically stabilized fluidized bed

A magnetically stabilized fluidized bed (MSFB, φ 500mm x 2100mm) was designed to study dust removal from flue gas. Based on the mechanism of dust removal in a fixed bed, the effects on collection efficiency of magnetic field intensity, ratio of flue gas velocity to minimum fluidization velocity, bed height, and particle average diameter, were investigated. Then feasible methods for MSFB to better remove dust were proposed. Over 95% of dust removal with MSFB can be achieved, when stable fluidization is maintained and when magnetic particles are frequently renewed.