Site-Selective Supramolecular Complexation Activates Catalytic Ethane Oxidation by a Nitrido-Bridged Iron Porphyrinoid Dimer

Development of supramolecular methods to further activate a highly reactive intermediate is a fascinating strategy to create novel potent catalysts for activation of inert chemicals. Herein, a supramolecular approach to enhance the oxidizing ability of a high-valent oxo species of a nitrido-bridged iron porphyrinoid dimer that is a known potent molecular catalyst for light alkane oxidation is reported. For this purpose, a nitrido-bridged dinuclear iron complex of porphyrin-phthalocyanine heterodimer 3 ⁵⁺, which is connected through a fourfold rotaxane, was prepared. Heterodimer 3 ⁵⁺ catalyzed ethane oxidation in the presence of H₂O₂ at a relatively low temperature. The site-selective complexation of 3 ⁵⁺ with an additional anionic porphyrin (TPPS⁴⁻) through π–π stacking and electrostatic interactions afforded a stable 1:1 complex. It was demonstrated that the supramolecular post-synthetic modification of 3 ⁵⁺ enhances its catalytic activity efficiently. Moreover, supramolecular conjugates achieved higher catalytic ethane oxidation activity than nitrido-bridged iron phthalocyanine dimer, which is the most potent iron-oxo-based molecular catalyst for light-alkane oxidation reported so far. Electrochemical measurements proved that the electronic perturbation from TPPS⁴⁻ to 3 ⁵⁺ enhanced the catalytic activity.     

A new method for atmospheric nitrogen dioxide measurements using the combination of a stripping coil and fluorescence detection.

A new stripping coil for the collection of nitrogen dioxide (NO2) has been developed to increase its versatility and efficiency. Nitrogen dioxide measurements based on quantitative collection through a reaction coil into an alkaline solution has been examined. Nitrogen dioxide is collected in a 0.1 N NaOH solution. This collection system has an efficiency of nearly 100%. The absorbed nitrogen dioxide has been measured by fluorescence detection with sub-ppbv detection limits. The excitation wavelength at 360 nm and the produced emission wavelength at 405 nm were suitable for nitrite ion measurements.     

Electroneutrality coupling of electron transfer at an electrode surface and ion transfer across the interface between thin-layer of 1-octyl-3-methylimidazolium bis(perfluoroalkylsulfonyl)imide covering the electrode surface and an outer electrolyte solution.

The electrode reaction of decamethylferrocene (DMFc) dissolved in a thin layer of a room-temperature molten salt (RTMS), 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (C8mimC1C1N) or 1-octyl-3-methylimidazolium bis(pentafluoroethylsulfonyl)imide (C8mimC2C2N), on a self-assembled monolayer-modified gold electrode is coupled with the ion transfer across the interface between the RTMS and the outer aqueous solution (W) to give a voltammogram whose shape resembles a voltammogram of a simple one-electron transfer process. The electroneutrality of the RTMS layer during the oxidation of DMFc to decamethylferricenium ion is maintained by the concomitant dissolution of C8mim+ ion from the RTMS phase to the W phase, and the reduction of decamethylferricenium ion to DMFc is accompanied by the transfer of either C1C1N- or C2C2N- from RTMS to W. The midpoint potential of the voltammogram varies with the concentration of the salt in the aqueous phase, C8mimCl or LiCnCnN (n = 1 or 2), in a Nernstian manner, showing that the phase-boundary potential between the RTMS and the W is controlled by the partition of these ions. Although the phase-boundary potential across the RTMS / W interface is Nernstian with respect to the ions common to both phases at the equilibrium, the polarization at the RTMS / W interface under current flow distorts the shape of the voltammograms, resulting in a wider peak separation in the voltammogram.     

Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Transfructosylation of rebaudioside A (a sweet glycoside of Stevia leaves) with Microbacterium beta-fructofuranosidase.

It was found that a beta-fructofuranosidase produced by Microbacterium sp. H-1 has potent trans-beta-fructofuranosylation activity from sucrose (donor). By means of this enzyme system, rebaudioside A (RA), the second major sweet steviol glycoside of the leaves of Stevia rebaudiana, was subjected to transfructosylation, affording a mono-beta-fructofuranosylated product (RA-F) in a high yield. The structure of RA-F was elucidated as beta-D-fructofuranosyl-(2----6)-beta-D-glucopyranosyl ester of steviol-13-O-[beta-D-glucopyranosyl-(1----2)]- [beta-D-glucopyranosyl-(1----3)]-beta-D-glucopyranoside. Some improvement in the quality of sweetness was observed for RA-F.     

Discrimination of carbonyl groups of meso-α-diketones with Horner-Wadsworth-Emmons reagent of chiral binaphthyl esters

Asymmetric Horner-Wadsworth-Emmons reactions of selected meso-α-dicarbonyl compounds with chiral phosphonate reagents, which possessed axially dissymmetric 1,1′-bi-2- or 8-naphthol at the carboxylate moiety as a chiral auxiliary, were examined. The reactions proceeded smoothly with good chemical yields as well as with high diastereoselectivities. Z-olefins were preferentially formed, and it was found that the free hydroxy group at the 2′- or 8′-position on the naphthalene ring plays a crucial role in the high diastereoselectivity, probably due to a complex-induced proximity effect. Mechanistic considerations are also described.     

2D-PIV analysis of loach motion and flow field

The propulsion methods of the aquatic lives are the results of optimization by evolution and are useful for the design of swimming-robot, etc. Among them, loach has unique propulsion technique both bending its long body and shaking caudal fin. Our purpose of the research is to clarify its swimming mechanism through flow field analysis. Two dimensional motion and flow around it have been experimentally visualized by particle image velocimetry (PIV). Vortices around a loach and the interactions between the loach body and surrounding water are analyzed. Generating and growing vortices by bending its body, it pushes water backward to gain repulsing force, and it seems that moves through vortices reducing the resistance force at the same time. When a vortex reaches to the caudal fin, it accelerates both sides of the vortex pushing water backward and seems gaining propulsion utilizing the caudal fin. After moving forward, loach leaves a vortex street like reverse Karman vortices, which means that loach gains propulsion.     

Dicationic ((−)-sparteine)palladium-catalyzed enantioselective aldol reaction of aldehydes with 1-phenyl-1-trimethylsilyloxyethene, proceeding via a palladium enolate

A dicationic ((−)-sparteine)palladium complex underwent a superior catalytic enantioselective aldol reaction of aldehydes with 1-phenyl-1-trimethylsilyloxyethene performing satisfactorily, starting with ((−)-sparteine)PdCl₂ and AgSbF₆ as catalyst precursors (1 mol % loading) in the presence of 3 Å molecular sieves over the reaction.     

Effect of structural variation within cationic azo-surfactant upon photoresponsive function in aqueous solution

The cationic azo-surfactants possessing different spacers and tail alkyl chain lengths have been synthesized by azocoupling ofp-alkylaniline orop-ethoxyaniline with phenol, followed by alkylation and quaternalization with dibromoalkane and trimethylamine, respectively. These surfactants showed a good solubility in water. A reversibletrans-cis isomerization of the azosurfactants by photoirradiation was assessed by UV-Vis absorption spectra. Due to a difference in HLB between thetrans- andcis-surfactants, the observed critical micelle concentration (CMC) values and the electric conductivity of the surfactant solution at above the CMC were significantly affected by the photoinducedtrans-cis isomerization. The azo-surfactants bearing moderate alkyl chain lengths such as surfactants 6 (R₂=C₂H₄, R₃=C₄H₉) and 9 (R₂=C₄H₈, R₃=C₂H₅) were found to be effective to achieve large CMC changes (3.6 mmol/L for 6 and 5.9 mmol/L for 9) by UV-light irradiation. The replacement of the tail chain species also affected the photoresponsive function. The surfactant 12, possessingp-ethoxy group as the tail chain, was found to form a stable micelle aggregation as compared with the structurally related surfactant 10 having ethyl unit as its tail group, but it exhibited a large CMC change (5.3 mmol/L) by UV-light irradiation.