Analytical quality control by solid sampling GFAAS in the production of animal tissue reference materials: lead and cadmium in bovine liver reference materials

Summary The function of solid sampling graphite furnace atomic absorption spectrometry (SS-GFAAS) in the laboratory-internal preparation, production and standardization of bovine liver reference material is described. Analytical quality assurance was achieved by using a wet digestion decomposition procedure and GFAAS (WD-GFAAS) as well as three different methods of SS-GFAAS. It will be shown, that SS-GFAAS is an adequate and efficacious method of analytical quality control in the production of reference materials. Details are given about the preliminary steps of sample selection and preparation, applying SS-GFAAS both as a screening method and for the detection of contamination during the production of the reference materials. The element contents of the four bovine liver materials measured after decomposition with nitric acid in the open system by GFAAS and also by Flame-AAS, using the slotted tube atom trap, are compared statistically with the results obtained by SS-GFAAS. In solid sampling analyses three different systems were applied: a solid sampling ZAA-spectrometer with platform-boat, a D₂AA-spectrometer with solid sampling graphite tube and platform-drawer and an autoprobe-D₂AA-spectrometer with solid sampling autoprobe and graphite tube.     

Triphenylphosphan-Nickel(0)-Komplexe mit Isocyanid-Liganden — [(RNC)nNi(PPh3)4–n] (n = 1–3)

Triphenylphosphane Nickel(0) Complexes with Isocyanide Ligands — [(RNC)_nNi(PPh₃)_4–n] (n = 1–3) Synthesis and properties of the isocyanide triphenylphosphane nickel(0) complexes [(RNC)Ni(PPh₃)₃], [(RNC)₂Ni(PPh₃)₂] and [(RNC)₃Ni(PPh₃)] (R = ^tBu, Cy, PhCH₂, p-TosCH₂) are described. I.r. and ³¹P n.m.r. spectra were recorded and the X-ray crystal structure of [(PhCH₂NC)₂Ni(PPh₃)₂] was determined.     

Über die Uranylverbindungen des Natrium-cyklohexyldithiocarbaminats

Zusammenfassung Na-cyklohexyldithiocarbaminat reagiert im p_H-Bereich 6,6 bis 7,2 mit Uranylsalzen unter Bildung eines in Wasser mit gelber Farbe lösliehen Komplexes, der bei p_H 6,6 ein Absorptionsmaximum bei 392 bis 394 nm besitzt. Die wäßrige Lösung wird durch Zusatz von Alkalilauge bis zum p_H 8 bis 9 momentan entfärbt.Es wird ein Kaliumdoppelsalz KUO₂(S₂HCNC₆H₁₁)₃ · 3 H₂O beschrieben; ferner wird über die Umwandlung des Calciumdoppelsalzes beim Kochen mit NaOH berichtet.

---

Summary Sodium cyolohexyldithiooarbamate reacts, in the p_H range 6.6 to 7.2, with uranium salts to yield a complex which gives a yellow aqueous solution. The absorption maximum is at 392–394 nm at p_H 6.6. The aqueous solution loses its color immediately when caustic alkali is added to raise the p_H to 8 or 9.A potassium double salt, KUO₂(S₂HCNC₆H₁₁)₃ · 3 H₂O is described. A report is also given of the transformation of the calcium double salt on boiling with NaOH.

---

Résumé Le dithiocarbamate de cyclohexylsodium réagit dans le domaine de p_H 6,6 à 7,2 sur les sels d'uranyle avec formation d'un complexe coloré en jaune, soluble dans l'eau, qui possède à p_H 6,6 un maximum d'absorption pour 392–394 nm. Par addition de lessive alcaline jusqu'à p_H 8 à 9 on décolore momentanément la solution aqueuse.On décrit un sel double de potassium KUO₂(S₂HCNC₆H₁₁)₃ · 3 H₂O; on rend compte, de plus, de la transposition du sel double de calcium par chauffage avec la soude.

---

---

Gewidmet zur 100. Wiederkehr des Geburtstages vonFriedrich Emich.     

Preparation of Neutral Ionophores for Alkali and Alkaline Earth Metal Cations and their application in ion selective membrane electrodes

The preparation of a series of non-cyclic, uncharged ligands able to selectively complex alkali and alkaline earth metal cations is described. These molecules are designed to be used as carriers for cations through membranes. Some of the compounds show high Ca²⁺ and Na⁺ selectivity, respectively, in liquid membrane electrodes.     

Use of Dimethylsilyl Ethers for Characterizing Primary Aliphatic Alcohols: A comparison of mass spectrometric fragmentation of di- and trimethylsilyl derivatives

Mass spectral fragmentation patterns of dimethylsilyl (DMS) ethers of primary unbranched, branched, and secondary unbranched aliphatic alcohols in the C₅ to C₁₀ range are compared with those of the corresponding trimethylsilyl (TMS) derivatives. Unlike their TMS analogues, DMS ethers of primary alcohols exhibit pronounced rupture of the C? C bond adjacent to the oxygen atom within the alkyl moiety (loss of an alkyl radical R) in marked preference to cleavage within the silyl substituent (loss of CH₃). Within this class of compounds, complementary preparation of DMS derivatives can therefore be used to establish or to confirm the site, and thus the primary nature of the hydroxyl group, whereas preparation of TMS ethers may be of advantage in deducing molecular size. For the derivatives of secondary alcohols this diagnostically useful difference in fragmentation behaviour is not observed.     

Excess molar quantities of (a halogenated n-alkane + an n-alkane) A comparative study of mixtures containing either 1-chlorobutane or 1,4-dichlorobutane

Excess molar volumes V_m^E at 298.15 K were obtained, as a function of mole fraction x, for series I: {x1-C₄H₉Cl + (1 ? x)n-C_lH_{2l + 2}}, and II: {x1,4-C₄H₈Cl₂ + (1 ? x)n-C_lH_{2l + 2}}, for l = 7, 10, and 14. 10, and 14. The instrument used was a vibrating-tube densimeter. For the same mixtures at the same temperature, a Picker flow calorimeter was used to measure excess molar heat capacities C_{p, m}^E at constant pressure. V_m^E is positive for all mixtures in series I: at x = 0.5, V_m^E/(cm³ · mol^?1) is 0.277 for l = 7, 0.388 for l = 10, and 0.411 for l = 14. For series II, V_m^E of {x1,4-C₄H₈Cl₂ + (1 ? x)n-C₇H₁₆} is small and S-shaped, the maximum being situated at x_max = 0.178 with V_m^E(x_max)/(cm³ · mvl^?1) = 0.095, and the minimum is at x_min = 0.772 with V_m^E(x_min)/(cm³ · mol^?1) = ?0.087. The excess volumes of the other mixtures are all positive and fairly large: at x = 0.5, V_m^E/(cm³ · mol^?1) is 0.458 for l = 10, and 0.771 for l = 14. The C_{p, m}^Es of series I are all negative and |C_{p, m}^E| increases with increasing l: at x = 0.5, C_{p, m}^E/(J · K^?1 · mol^?1) is ?0.56 for l = 7, ?1.39 for l = 10, and ?3.12 for l = 14. Two minima are observed for C_{p, m}^E of {x1,4-C₄H₈Cl₂ + (1 ? x)n-C₇H₁₆}. The more prominent minimum is situated at x′_min = 0.184 with C_{p, m}^E(x′_min)/(J · K^?1 · mol^?1) = ?0.62, and the less prominent at x″_min = 0.703 with C_{p, m}^E(x″_min)/(J · K^?1 · mol^?1) = ?0.29. Each of the remaining two mixtures (l = 10 and 14) has a pronounced minimum at low mole fraction (x_min = 0.222 and 0.312, respectively) and a broad shoulder around x = 0.7.