Charge density effects in salt‐free polyelectrolyte solution rheology

Solution rheology of 2‐vinyl pyridine and N‐methyl‐2‐vinyl pyridinium chloride random copolymers in ethylene glycol was studied over wide ranges of concentration and effective charge. The fraction of quaternized monomers α and the fraction of monomers bearing an effective charge f of these copolymers were measured using counterion titration and dielectric spectroscopy, respectively. Ethylene glycol is a good solvent for neutral poly(2‐vinyl pyridine), with very few ionic impurities. The viscosity η and relaxation time τ of dilute and semidilute unentangled solutions exhibit the scaling with concentration and effective charge expected by the Dobrynin model. Reduced viscosity data are independent of concentration in dilute solution, giving an intrinsic viscosity that depends on effective charge, and the experimental data obey the Fuoss law in the semidilute unentangled regime. Scaling concentration with the overlap concentration (c/c*) reduces these data to common curves, and c* ～ f ^?12/7 as predicted by the Dobrynin model, where f is the fraction of monomers bearing an effective charge. While the overlap concentration depends strongly on effective charge until counterion condensation occurs, the entanglement concentration c_e is surprisingly insensitive to effective charge, indicating that entanglement effects are not understood using the Dobrynin model. The terminal modulus G = η/τ depends only on the number density of chains G = ckT/N for c* < c < c_e, and G ～ c^3/2 for c > c_e independent of the effective charge. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2001–2013, 2006     

Alkylation d'anions ambidents en catalyse par transfert de phase. Cas des hydroxypyridines

Alkylation of ambident-anions derived from 2- and 4-pyridones yield by phase transfer catalysis, 80% of N-substitution and 20% of O-substitution. Change of salts, solvents, temperature and alkyl halide do not interfere very much with the N- and O-alkylation percentage of substitution. Overall yields range from 40 to 80% with primary or secondary alkyl halides.     

Full-wave analysis of waveguide-to-microstrip transitions for millimeter wave applications

A full-wave solution is presented for the waveguide to microstrip transition. The exact Green's function of the transition is used in a moment method procedure. The behavior of the microstrip transition to a rectangular waveguide is studied with respect to the critical dimensions of the microstrip width, length and backshort location. The convergence characteristics of the full wave analysis method are investigated, along with the current distribution and the input impedance. Results given for the return loss is compared with measurements.     

Bioavailability Enhancement of Cepharanthine via Pulmonary Administration in Rats and Its Therapeutic Potential for Pulmonary Fibrosis Associated with COVID-19 Infection

Cepharanthine (CEP) has excellent anti-SARS-CoV-2 properties, indicating its favorable potential for COVID-19 treatment. However, its application is challenged by its poor dissolubility and oral bioavailability. The present study aimed to improve the bioavailability of CEP by optimizing its solubility and through a pulmonary delivery method, which improved its bioavailability by five times when compared to that through the oral delivery method (68.07% vs. 13.15%). An ultra-performance liquid chromatography tandem-mass spectrometry (UPLC-MS/MS) method for quantification of CEP in rat plasma was developed and validated to support the bioavailability and pharmacokinetic studies. In addition, pulmonary fibrosis was recognized as a sequela of COVID-19 infection, warranting further evaluation of the therapeutic potential of CEP on a rat lung fibrosis model. The antifibrotic effect was assessed by analysis of lung index and histopathological examination, detection of transforming growth factor (TGF)-β1, interleukin-6 (IL-6), α-smooth muscle actin (α-SMA), and hydroxyproline level in serum or lung tissues. Our data demonstrated that CEP could significantly alleviate bleomycin (BLM)-induced collagen accumulation and inflammation, thereby exerting protective effects against pulmonary fibrosis. Our results provide evidence supporting the hypothesis that pulmonary delivery CEP may be a promising therapy for pulmonary fibrosis associated with COVID-19 infection.     

Mössbauer study of a novel series of ternary rare-earth iron-rich intermetallics: ND(Fe1-xTi x )6+y(x ∼ 0.1 and 0≤y≤5)

A study of the Nd-Fe-Ti phases at the Fe-rich end of the phase diagram has been carried out using⁵⁷Fe Mössbauer spectroscopy, scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX). In particular,⁵⁷Fe Mössbauer spectroscopy has been used to characterize the phases present in these samples. In addition to the two well-known 217 and 112 phases, twonovel phases have been identified, with compositions denoted by3–29 and9–94, which are closely linked to the orthorhombic ScFe₆Ga₆-type and the hexagonal TbCu₇-type structures, respectively. The possible crystal structures of these new phases will be discussed in terms of the dumbbell substitution sequence in the CaCu₅ structure.     

EFFECT OF CRYSTALLIZATION TEMPERATURE ON MCM-41 SYNTHESIS

在Ｎａ２ＯＳｉＯ２ＣＴＡＢＨ２Ｏ四元水热体系中系统地考察了晶化温度对中孔ＭＣＭ４１分子筛合成及其骨架结构的影响。实验结果表明，提高晶化温度虽然能明显加快晶化速率，缩短晶化时间，但同时样品的结晶度和中孔骨架结构的有序度却被迅速破坏。这些特点与传统沸石的合成过程完全不同，其原因主要是合成ＭＣＭ４ｌ时所用的模板剂及其在合成中所起的模板作用与传统沸石完全不同。相对低的晶化温度（如１００℃）有利于高质量和高热稳定性的中孔ＭＣＭ４ｌ分子筛的合成。     

脉冲磁场处理对碳纳米管掺杂MgB2线材临界电流密度的影响

对碳纳米管(CNT)掺杂MgB₂超导体磁场处理后的行为进行了研究. 结果表明，CNT掺杂MgB₂超导体经5T脉冲磁场处理后临界电流密度J_c(H)在低磁场下提高了2—3倍，高场下提高一个数量级以上，扫描电镜结果显示CNT沿着处理磁场方向规则排列并且成为MgB₂基体的形核中心和高效的磁通钉扎中心. 关键词： 2')" href="#">MgB₂ 碳纳米管 脉冲磁场处理     

Research on front-end electronics gain compensation of MCP imaging detector北大核心CSCD

基于微通道板电子倍增电荷分割型阳极的成像探测器常用于行星大气、气辉等微弱信号探测。针对探测器读出电路增益不相等导致探测器成像产生畸变的问题,利用理论分析结合MATLAB仿真揭示了不同畸变图像的形成机制,在该基础上提出了一种探测器读出电路增益补偿方法减小探测器成像畸变。通过MATLAB仿真和实验测试结果表明该文提出的方法能够有效减小由于读出电路增益不相等导致的探测器成像畸变。     

Effect of β-Nucleating Agent on the Crystallization,Mechanical Properties,and Heat Resistance of Injection-Molded Isotactic Polypropylene

Injection-molded β-isotactic polypropylene (β-iPP) was prepared with a commercial β-nucleating agent (NT-A). The effect of NT-A on the crystallization, mechanical properties, and heat resistance of β-iPP was investigated by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), polarized light microscopy (PLM), and mechanical and heat deflection tests. DSC and WAXD analysis showed that the content of β-crystals in the nucleated iPP was higher than that of pure iPP, and the content of β-crystals of the core was higher than that of the skin. PLM observations showed that injection-molded iPP had an obvious skin-core structure. NT-A induced abundant β-crystals and resulted in small spherulites which improved the Izod notched impact strength. When the content of NT-A was 0.075wt%, the Izod notched impact strength reached a maximum, 2.6 times more than that of pure iPP. The heat distortion temperature was also improved by NT-A.     

Structural study of 12 MeV electron irradiated polypropylene by X-ray diffraction

12 MeV electron beams with different doses of 4, 8, 16 and 32 Mrad from LINAC designed by Nanjing University have been used to irradiate polypropylene films and their structures studied by X-ray diffraction afterwards. We have found that the electron irradiation does not change the total crystallinity of polypropylene but greatly inflences its crystal structure with increase of phase and decrease of phase as irradiation dose increases (within 16 Mrad). However, it is unexpected that the structure of irradiated sample with 32 Mrad are similar to that of the control sample. This behavior has also been observed in positron annihilation lifetime measurements.