利用爆磁压缩发生器产生高功率脉冲高电压

 爆磁压缩发生器产生脉冲高电压技术可以用于产生高功率微波及强电磁脉冲的实验研究。给出了利用螺旋型爆磁压缩发生器（HEMG）驱动电爆炸丝功率调节系统产生高功率脉冲高电压的实验方法和主要的结果。在利用HEMG驱动电爆炸丝断路开关（EEOS）产生脉冲高电压实验中，获得了最高电压700~800kV,功率大于20GW的脉冲输出。     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

糠酸一步催化法制备四氢糠酸甲酯

以糠酸、甲醇、氢气为原料,采用连续流动固定床微反应器,Pd-Ni/γ-Al2O3为催化剂,使糠酸一步加氢甲酯化生成α-四氢糠酸甲酯.研究了反应的温度,压力,气、液体流速,进料流量等因素对催化反应的影响.结果表明:在1.5MPa,250℃,氢气空速3300 h-1,液体空速3.0 h-1(氢油比为50)时,糠酸转化率为96.6%,四氢糠酸甲酯的选择性97.2.0%,产率94.0%.催化剂稳定性较好,连续运转280小时后未见活性下降.该反应体系活性高,选择性好,反应压力低,催化剂性能稳定,操作简单,产物易分离.     

Experimental study of photocatalytic oxidation of formaldehyde and its by-products

Formaldehyde is one of the most harmful pollutants that endanger occupants' health and the way of its effective removal has become a focus in the field of air quality. This paper studies the static photocatalytic removal of formaldehyde experimentally and finds out that carbon monoxide, which is more harmful to occupants' health than the formaldehyde itself, is one of the by-products in the process of photocatalytic oxidation of formaldehyde. The increase of carbon monoxide concentration should be taken into consideration in the photocatalytic application. The photocatalyst surface at room temperature can weakly adsorb CO and CO₂, which can deactivate the photocatalysts.     

套索冠醚毛细管色谱柱的研制

用套索冠醚N,N′-双(2-甲基吡啶)-二氮杂-18-冠-6作为固定相,涂渍在弹性石英毛细管内,测其柱效、惰性、热稳定性、平均极性及选择性等性质.其结构由元素分析、红外光谱、核磁共振及质谱分析的试验数据所证实.试验表明,它具有良好的色谱性能、中等极性,适用于对醇、卤代烃、芳香烃等各类异构体的分离,并用分子结构观点探讨了保留机理.     

Preparation and evaluation of uniform-sized molecularly imprinted polymer beads used for the separation of sulfamethazine

Uniform-sized molecularly imprinted polymer (MIP) beads were prepared using a one-step swelling and polymerization method. The obtained sulfamethazine (SMZ)-imprinted polymer showed high affinity and selectivity toward SMZ and other structurally related sulfonamides in acetonitrile or water-acetonitrile mobile phases, particularly in high aqueous systems. The column performance of the MIPs for SMZ and its analogues could be improved by elevating the column temperature and optimizing the flow rate. The hydrogen-bonding effect plays a significant role in the recognition process of SMZ-imprinted polymer systems in organic media, while the ion-exchange effect, as well as hydrophobic effect, dominates the retention mechanism in aqueous-rich media, in addition to shape recognition.     

基于T2FCM-FE-HMMs的隐马氏模型参数估计算法

把2型模糊集的思想引入到了基于模糊聚类的离散HMM参数训练中,提出了改进的T 2FCM-FE-HMM s算法。     

可用至3.5 V的碳纳米管阵列超级电容器

应用化学气相沉积在钽片和不锈钢片表面直接生长碳纳米管阵列(CNTA)制备超级电容器电极,并分别作正、负极组装有机体系扣式电容器.扫描电子显微镜、循环伏安、恒电流充放电和交流阻抗表征、测试材料的微观形貌和电化学性能.结果表明,该电容器可获得高达3.5 V的工作电压,较长的循环寿命,较好的倍率性能.基于CNTA质量的比功率和比能量性能分别为928 kW.kg-1和19 Wh.kg-1.     

强激光腔镜温升对腔几何参数和远场光强的影响

 利用交替方向隐式有限差分法分析了高能激光器虚共焦非稳腔反射镜的温度场及热变形的数值计算方法。以单晶硅为例,计算了反射镜由于吸收激光能量而形成的温度场分布以及由此引起的热变形对谐振腔几何结构参数的影响,并在此基础上数值模拟了热畸变情况下正支虚共焦非稳腔的远场光强分布。计算结果表明:在激光束辐照的开始阶段,温升场主要集中在激光束辐照的中心区域内,在整个镜面上远未拉平,由此引起的厚度方向温升分布也是如此,很不均匀。