Magnetic properties of lanthanum orthoferrite fine powders prepared by different chemical routes

Fine powders of lanthanum iron oxide, LaFeO₃, have been prepared by solid state reaction as well as sol-gel synthesis and nebulized spray pyrolysis. Structures, morphologies and magnetic susceptibility measurements of these powders have been examined. The powders prepared by all the three low-temperature routes contain nearly spherical particles with an average diameter of 40 nm. These samples show a lower Neel temperature than the powder prepared by solid state reaction besides showing much lower magnetic susceptibility at low temperatures. Dedicated to Professor C N R Rao on his 70th birthday     

Fermion masses

In this paper, we show that 2m _e m /(m _e ² +m ² = (g _V/g _A) _e ² . From this expression, the Weinberg mixing parameter is shown to be 0·2254 or 0·2746. Assuming that the electron and muon neutrino masses are degenerate, we find thatm _v = (g _V/g _A) _e ² . (m _e m )/M _WL, where M_WL is the mass of the standard W^± boson. The neutrino mass turns out to be 6·5 eV. The -neutrino mass is found to be about 81 MeV. The masses of c, t, s and b quarks are found to be respectively 1·7 GeV, 21·2 GeV, 0·57 GeV and 2·18 GeV by assumingm _d=m _u= 0·3 GeV. All these masses agree with other estimates except the b quark which has about half of its expected value.     

Differential incoherent scattering of 279.2 keV photons by Zr,Sn, Ta,Pb and U

Differential incoherent scattering cross-section ratios of 279.2 keV photons by zirconium, tin, tantalum, lead and uranium elements are experimentally determined by comparing the peak areas under the degraded photon energy with that of an equivalent aluminium foil employing a high resolution 35 c.c. coaxial Ge(Li) detector. Studies have been made in single configuration in an angular range of 20° to 115°. The results are compared with theoretical values obtained from the non-relativistichfs model of Hubbell and co-workers. The cross-section ratios decrease as the atomic number increases for a given scattering angle.     

Optical studies of two dimensional gratings in fused silica, GE 124, and Foturan glasses fabricated using femtosecond laser pulses

Herein we present results on the femtosecond laser direct writing and optical characterization studies of two dimensional gratings in fused silica, GE 124, and Foturan^™ glasses. Varieties of structures were achieved with varying input energy and spatial orientation of the samples. Various characterization techniques including fluorescence spectroscopy, micro-Raman spectroscopy, and laser confocal microscopy were employed to analyze the structural and physical modifications at the focal volume resulting in change of refractive index. Diffraction efficiencies of 9–12% were observed from the grating structures. A broad-band emission was observed in the laser-modified region of the Foturan glass. The obtained results are analyzed in the light of recent work in similar glasses and exploring the applications of such structures in the fields of photonics.     

Luminescent characteristics of CaTiO3:Pr thin films prepared by pulsed laser deposition method with various substrates

CaTiO₃:Pr³⁺ films were deposited on different substrates such as Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica using pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by XRD and SEM measurements. The films grown on the different substrates have different crystallinity and morphology. The FWHM of (2 0 0) peak are 0.18, 0.25, 0.28, and 0.30 for Al₂O₃ (0 0 0 1), Si (1 0 0), MgO (1 0 0), and fused silica, respectively. The grain sizes of phosphors grown on different substrates were estimated by using Scherrer's formula and the maximum crystallite size observed for the thin film grown on Al₂O₃ (0 0 0 1). The room temperature PL spectra exhibit only the red emission peak at 613 nm radiated from the transition of (¹D₂ → ³H₄) and the maximum PL intensity for the films grown on the Al₂O₃ (0 0 0 1) is 1.1, 1.4, and 3.7 times higher than that of the CaTiO₃:Pr³⁺ films grown on MgO (1 0 0), Si (1 0 0), and fused Sillica substrates, respectively. The crystallinity, surface morphology and luminescence spectra of thin-film phosphors were highly dependent on substrates.     

Room temperature magnetism of Fe doped CdS nanocrystals

Undoped and Fe doped CdS nanocrystals with Fe content of 2–5 at% of average crystallite size 1.2–2 nm have been obtained using chemical co-precipitation method with 2-mercaptoethonal as capping agent at 80 °C. X-ray diffraction (XRD) results showed that the undoped CdS nanocrystals were in mixed phase of cubic and hexagonal, where as the doped CdS nanocrystals were in hexagonal phase. Room-temperature ferromagnetism has been observed in Fe-doped CdS nanocrystals. Magnetic studies indicated diamagnetism in undoped, ferromagnetism in lightly doped (2 and 3 at%) and paramagnetism in samples of higher Fe content (4 and 5 at%). The substitutional incorporation of Fe³⁺ ion in Cd²⁺ sites was reflected in structural and electron paramagnetic resonance (EPR) measurements. Isolated as well as interacting Fe³⁺ ions are observed in EPR.     

Instantaneous work hardening behaviour of two-phase tungsten heavy alloys: a phenomenological approach

ABSTRACT

The present work describes a phenomenological approach to explain the instantaneous behaviour of tungsten heavy alloys (WHAs) in heat-treated and swaged conditions. The strengths and elongation values of heat-treated materials are lower and higher than those of the swaged samples respectively. The heat-treated materials exhibit two slopes in true stress–true plastic strain curves and follow the Ludwigson constitutive equation. On the other hand, swaged materials display a single slope and adhere to typical Swift constitutive equation. The latter reflect the presence of pre-strain in the materials due to swaging deformation. The fracture surfaces in heat-treated materials consist of W-W decohesion along with matrix rupture and W-cleavage, while swaged samples consist of mainly W-cleavage. Both the materials display three typical stages (I, II and III) of work hardening. The second derivatives of true stress–true plastic strain curves of these alloys exhibit a perfect parabola although the nature of true stress–true strain as well as true stress–true plastic strain curves is quite different in heat-treated and swaged materials. This has been observed for the first time in WHAs consisting of matrix and W-grains. The shape of the parabola is simple and easy to fit. The fitting parameters of parabolas have been successfully employed to explain the flow behaviour of a large number of tungsten heavy alloys having two-phase microstructure in different processing conditions.     

Highly Stable Graphene Inks Based on Organic Binary Solvents

Formulating highly stable graphene-based conductive inks with consistency in electrical properties over the storage period has remained a significant challenge in the development of wearable electronics. Two highly stable graphene-based inks (Cyclohexanone:Ethylene glycol (CEG) ink and Cyclohexanone:Terpineol (CT) ink) are prepared by using two different organic binary solvents, for the first time, without using solvent exchange methods. Both the inks display remarkably high stability (stable even after two months) with negligible variability in electrical properties. Here, it is demonstrated how such inks can be utilized to coat flexible substrates to create wearable e-textiles. Both the inks coated e-textiles show significantly low sheet resistance (≈209.1 Ω □⁻¹ for CEG ink and ≈322.4 Ω □⁻¹ CT ink) that show less than a 15% increase in electrical resistance over two months. Therefore, these inks offer high productivity and reproducibility and can be one of the most effective methods for formulating graphene-based inks.