Novel,organosoluble, light‐colored fluorinated polyimides based on 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl or 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl

Two series of fluorinated polyimides were prepared from 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl ( 2 ) and 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl ( 4 ) with various aromatic dianhydrides via a conventional, two‐step procedure that included a ring‐opening polyaddition to give poly(amic acid)s, followed by chemical or thermal cyclodehydration. The inherent viscosities of the polyimides ranged from 0.54 to 0.73 and 0.19 to 0.36 dL/g, respectively. All the fluorinated polyimides were soluble in many polar organic solvents, such as N,N‐dimethylacetamide and N‐methylpyrrolidone, and afforded transparent and light‐colored films via solution‐casting. These polyimides showed glass‐transition temperatures in the ranges of 222–280 and 257–351 °C by DSC, softening temperatures in the range of 264–301 °C by thermomechanical analysis, and a decomposition temperature for 10% weight loss above 520 °C both in nitrogen and air atmospheres. The polyimides had low moisture absorptions of 0.23–0.58%, low dielectric constants of 2.84–3.61 at 10 kHz, and an ultraviolet–visible absorption cutoff wavelength at 351–434 nm. Copolyimides derived from the same dianhydrides with an equimolar mixture of 4,4′‐oxydianiline and diamine 2 or 4 were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2416–2431, 2004     

Solid codes and the uniform density of fd-domains

By means of further investigation of solid codes,the problem“Is every fd-domain uni- formly dense”proposed by Yuqi Guo,C.M.Reis and G.Thierrin in 1988 is solved in this paper.     

Trefftz,collocation, and other boundary methods—A comparison

In this article we survey the Trefftz method (TM), the collocation method (CM), and the collocation Trefftz method (CTM). We also review the coupling techniques for the interzonal conditions, which include the indirect Trefftz method, the original Trefftz method, the penalty plus hybrid Trefftz method, and the direct Trefftz method. Other boundary methods are also briefly described. Key issues in these algorithms, including the error analysis, are addressed. New numerical results are reported. Comparisons among TMs and other numerical methods are made. It is concluded that the CTM is the simplest algorithm and provides the most accurate solution with the best numerical stability. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

On the Point-Particle (Newtonian) Limit¶of the Non-Linear Hartree Equation

We consider the nonlinear Hartree equation describing the dynamics of weakly interacting non-relativistic Bosons. We show that a nonlinear M?ller wave operator describing the scattering of a soliton and a wave can be defined. We also consider the dynamics of a soliton in a slowly varying background potential W(ɛx). We prove that the soliton decomposes into a soliton plus a scattering wave (radiation) up to times of order ɛ⁻¹. To leading order, the center of the soliton follows the trajectory of a classical particle in the potential W(ɛx). Received: 30 June 2000 / Accepted: 25 June 2001     

The Recognition of Double Euler Trails in Series-Parallel Networks

Given a series-parallel network (network, for short)N, its dual networkN′ is given by interchanging the series connection and the parallel connection of networkN. We usually use a series-parallel graph to represent a network. LetG[N] andG[N′] be graph representations ofNandN′, respectively. A sequence of edgese₁, e₂,…,e_kis said to form a common trail on (G[N], G[N′]) if it is a trail on bothG[N] andG[N′]. If a common trail covers all of the edges inG[N] andG[N′], it is called adouble Euler trail.However, there are many different graph representations for a network. We say that a networkNhas a double Euler trail (DET) if there is a common Euler trail for someG[N] and someG[N′]. Finding a DET in a network is essential for optimizing the layout area of a complementary CMOS functional cell. Maziasz and Hayes (IEEE Trans. Computer-Aided Design9(1990), 708–719) gave a linear time algorithm for solving the layout problem in fixedG[N] andG[N′] and an exponential algorithm for finding the optimal cover in a network without fixing graph representations. In this paper, we study properties of subnetworks of a DET network. According to these properties, we propose an algorithm that automatically generates the rules for composition of trail cover classes. On the basis of these rules, a linear time algorithm for recognizing DET networks is presented. Furthermore, we also give a necessary and sufficient condition for the existence of a double Euler circuit in a network.     

Tip-induced local anodic oxidation on p-GaAs surface with non-contact atomic force microscopy

Nano-sized oxide structures resulted from localized electrochemical oxidation induced by a negatively biased atomic force microscopy (AFM) tip operated with the non-contact mode were fabricated on p-GaAs(1 0 0) surface. The geometrical characteristics of the oxide patterns and their dependences on various fabrication parameters, e.g., the anodization time, the biased voltages, the tip scanning rates, as well as the formation mechanism and relevant growth kinetics are investigated. Results indicate that the height of the protruded oxide dots grow exponentially as a function of time in the initial stage of oxidation and soon reaches a maximum height depending linearly with the anodized voltages, in according with the behaviors predicted by space charge limited local oxidation mechanism. In addition, selective micro-Auger analysis of the anodized region reveals the formation of Ga(As)O_x, indicating the prominent role played by the field-induced nanometer-size water meniscus in producing the nanometer-scale oxide dots and bumps on p-GaAs(1 0 0) surface.     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

A Study of Concentration Polarization on Ion Exchange Membrane Electrodialysis

The concentration polarization phenomena in ion exchange membrane electrodialysis have been studied with single exchange membrane cell. The limiting current densities of Asahi ion-permselective membranes CK-1 and CK-2, Selemion ion-exchange membranes CMV, AMV, DMV and ASV have been measured with Ag-AgCl reversible electrode in various electrolyte solutions under 25°C and constant flow rate. In sodium chloride solution, the cation exchange membrane is easier to occur concentration polarization than the anion exchange membrane. The limiting current density increases as the concentration of solution increases for the same kind of ion exchange membrane. The experimental limiting current densities of Selemion CMV and AMV in NaCl, KCl, MgCl₂, CaCl₂, BaCl₂, Na₂SO₄, NaOH and HCl aqueous solutions are measured. The results show that the limiting current density increases as the ion mobility and diffusivity increase, and is affected by the transference number of ion. For the mixture of electrolyte solution, there are linear relationship between limiting current density and equivalent fraction of electrolytes.     

Simultaneous determination of cefazolin in rat blood and brain by microdialysis and microbore liquid chromatography

A sensitive microbore liquid chromatographic method combined with the minimally invasive technique of microdialysis was devised for simultaneously and continuously monitoring the levels of unbound blood and brain cefazolin in rats. Microdialysis probes were inserted into the jugular vein and brain striatum for blood and brain sampling, respectively. Chromatographic conditions consisted of a mobile phase of methanol-acetonitrile-100 mM monosodium phosphoric acid (20:10:70, v/v, pH 4.5) pumped through a microbore reversed-phase column at a flow rate of 0.05 mL/min. The ultraviolet detection wavelength was set at 270 nm. An on-line design allowed direct and continuous analysis of protein-free samples in the dialysate. Microdialysis probes, being home-made, were screened for acceptable in vivo recovery. Chromatographic resolution and detection were validated for response linearity as well as intra-day and inter-day variabilities. This method was then applied to pharmacokinetic profiling of protein unbound cefazolin in both the blood and brain following intravenous administration (10 mg/kg, i.v., n = 6). Rapid appearance of cefazolin in the rat brain striatal dialysate following drug injection suggested good blood-brain barrier penetration. According to a non-compartmental pharmacokinetics model, the area under the concentration (AUC) vs time ratio of cefazolin in rat brain and blood was 6%.