On the dispersion of a solute in oscillating flow of a non-Newtonian fluid in a channel

The paper presents an exact analysis of the dispersion of an immiscible solute in a non-Newtonian fluid (known as an incompressible second-order fluid which shows viscoelastic behaviour) flowing slowly in a parallel plate channel in the presence of a periodic pressure gradient. Using a generalized dispersion model which is valid for all times after the solute injection, the diffusion coefficients K _i (τ)(i=1,2,3,…) are obtained as functions of time τ in the case when the initial solute distribution is in the form of a slug of finite extent. The analysis leads to the novel result that K ₂(τ) (which is a measure of the longitudinal dispersion coefficient of the solute) has a steady part S in addition to a fluctuating part D ₂(τ) due to the pulsatility of the flow. It is found that S decreases with increase in the viscoelastic parameter M for given values of the amplitude λ and frequency ω of the pressure pulsation. On the other hand, it is found that at a fixed instant τ, the amplitude of D ₂(τ) increases with increase in M for given values of λ and ω. Further it is shown that at a given instant τ, the amplitude of D ₂(τ) decreases with increase in ω for given λ and M and the profile for D ₂(τ) becomes progressively flatter with increase in ω. Finally the axial distribution of the average concentration θ _m of the solute over the channel cross-section is determined at different instants after the solute injection for several values of M, λ and ω. The present study is likely to have important bearing on the problem of dispersion of tracers in blood flow through arteries.     

A simple and sensitive analytical method for the determination of antimony in environmental and biological samples.

The results of a study and application of leucocrystal violet for the determination of antimony in parts per million levels is described here. The proposed method is based on the reaction of antimony(III) with acidified potassium iodate to liberate iodine. The liberated iodine selectively oxidizes leucocrystal violet to crystal violet dye. The formed dye shows maximum absorbance at 590 nm. The color system obeys Beer's law in the concentration range from 0.4 - 3.6 microg antimony per 25 ml of final solution. The molar absorptivity and Sandell's sensitivity were found to be 7.32 x 10(5) l mol(-1) cm(-1) and 0.0016 microg cm(-2), respectively. All variables were studied in order to optimize the reaction. The proposed method is satisfactorily applicable for the analysis of antimony in various environmental and biological samples. The method is simple, highly sensitive, accurate and reliable.     

Analysis of degradation products by thermal volatilization analysis at subambient temperatures

In the subambient thermal volatilization analysis (TVA) technique, degradation products initially at ?196°C are allowed to warm up to ambient temperature in a controlled manner under vacuum conditions, and volatilization from the sample tube to a trap at ?196°C is monitored by means of a Pirani gauge. The technique is discussed in relation to earlier TVA work in which volatilization from a heated polymer sample was followed. Design and operation of a subambient TVA system are described, and examples of the application of the technique to the study of the degradation products of seven polymers are considered.     

Reactions of Titanium Alkoxides with N-Methylaminoalcohols

N-methylaminoalkoxides of titanium of the type Ti(OR)_4?n(O · CHR′ · CH₂ · NR″R?)_n where R = Et and Pr¹; n = 1–4; and R′ = R″ = H, R? = Me; R′ = H, R″ = R? = Me; R′ = R″ = R? = Me, synthesized by the reactions of titanium alkoxides with aminoalcohols, show interesting variations in their properties like physical state, volatility and molecular complexity. I.r. and p.m.r. spectra of these derivatives have been recorded. A few interchange reactions with methanol and tert-butanol have also been carried out. These aminoalkoxides get cleaved with acetyl chloride and undergo insertion reactions with phenylisocyanate, thus providing the first examples of insertion reactions in such derivatives.     

Role of dimethyl sulfoxide as a solvent for vinyl polymerization

Dimethyl sulfoxide has been used as a solvent in the polymerization of methyl methacrylate and styrene. The chain-transfer coefficients of the solvent and the values of δ [i.e., (2k_t)^1/2/k_p] in solvent-monomer mixtures of various compositions were determined. δ was observed to be dependent on the solvent concentration in the case of methyl methacrylate but remained constant in case of styrene. The lowering of the values of δ with increasing solvent concentration in case of methyl methacrylate has been attributed to an interaction between the solvent and poly(methyl methacrylate) radical resulting in lower termination rate.     

Polarographische Untersuchung der Nickel- und der Zinkkomplexe der Adipinsäure

Zusammenfassung Die Nickel- und Zinkkomplexe der Adipinsäure werden polarographisch untersucht. Es zeigt sich, daß Zink reversibel reduziert wird, wogegen Nickel eine irreversible Stufe ergibt. Die Stabilitätskonstanten des Zink—Adipinsäurekomplexes werden nachDeFord undHume berechnet. Der Einfluß des pH-Wertes auf die Zink- und die Nickelstufe wird untersucht. Zink und Nickel werden in Gegenwart vieler störender Kationen halbquantitativ bestimmt.

---

The said complexes have been studied by polarography. Zn is found to be reversibly reduced while Ni gives an irreversible wave. Stability constants of the Zn complex are calculated byDeFord andHume method. Effect of pH on Zn and Ni wave are reported. Estimations of Zn or Ni are carried out separately or in presence of interfering cations.

---

---

Mit 7 Abbildungen     

Synthesis and characterization of square-planar palladium(II) complexes containing anti- and syn-furan-2-aldoxime

Summary Fifteen palladium(II) square-planar complexes containing monodentate and/or bidentate anti- and syn-furan-2-aldoxime (FDH) have been isolated and characterized by elemental analysis, molecular weight determination, conductance studies, magnetic moments and i.r. spectral studies. The monodentate ligand coordinates through the nitrogen atom while the bidentate ligand coordinates through the furan oxygen atom and the nitrogen atom. The C-O-C stretching frequency of the furan ring may be taken as the criterion for the denticity of this ligand and is observed at 1240 and 1270 cm^– in anti- and syn-furan-2-aldoxime respectively. A shift to lower frequency occurs (in the complex) if the ligand is bidentate, however this frequency is unaffected if the ligand is monodentate.     

Reactions of dimethyl acetylenedicarboxylate—X: Reaction with salicylaldehyde,ortho hydroxyacetophenone, 2-hydroxychalcones and 2,2′-dihydroxychalcones

Salicylaldehyde reacts with dimethyl acetylenedicarboxylate in benzene solution to give a mixture of dimethyl o-formylphenoxymaleate, dimethyl o-formylphenoxyfumarate, 2,3-dicarbomethoxychrom - 2 - en - 4 - ol, 2,3 - dicarbomethoxychrom - 3 - en - 2 - ol, dimethyl (2,3 - dicarbomethoxychrom - 2 - en - 4 - yl) - oxalacetate and dimethyl fumarate. 2,3 - Dicarbomethoxychrom - 3 - en - 2 - ol in this reaction is formed from 2,3 - dicarbomethoxychrom - 2 - en - 4 - ol through a benzopyrylium intermediate. The reaction of salicylaldehyde with excess of dimethyl acetylenedicarboxylate, however, gives a mixture of 2,3 - dicarbomethoxychrom - 3 - en - 2 - ol and dimethyl (2,3 - dicarbomethoxychrom - 3 - en) - 2 - oxyfumarate. 2,3 - Dicarbomethoxychrom - 3 - en - 2 - ol itself reacts further with dimethyl acetylenedicarboxylate to give 2,3,12 - tricarbomethoxychrom - 3,4 - eno[2,3 - b] pyrone. Similarly, the reaction of o-hydroxyacetophenone with dimethyl acetylendicarboxylate gives a mixture of dimethyl o-acetylphenoxymaleate, dimethyl o-acetylphenoxyfumarate, 2,3 - dicarbomethoxy - 4 - methylchrom - 2 - en - 4 - ol and 2,3 - dicarbomethoxy - 4 - methylchrom - 3 - en - 2 - ol. Both 2-hydroxychalcone and 2 - hydroxy - 4′ - methoxychalcone give mixtures of chalcone - 2 - oxymaleate and chalcone - 2 - oxyfumarate. The reaction of 2,2t?-dihydroxychalcone, however, gives 2′-hydroxyflavone, in addition to the expected maleate and fumarate. Similar reactions of 5 - chloro - 2,2′ - dihydroxychalcone and of 3,5 - dibromo - 2,2′ - dihydroxychalcone, on the other hand, give 2,3 - dicarbomethoxy - 4 - (o - hydroxyphenacyl) - 6 - chlorochrom - 2 - ene and 2,3 - dicarbomethoxy - 4 - (o - hydroxyphenacyl) 6,8 - dibromochrom - 2 - ene, respectively, together with the corresponding maleates and fumarates.