Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

Beiträge zur Massenspektrometrie der Gelsemium-Alkaloide

Zusammenfassung Von den Nebenalkaloiden vonGelsemium sempervirens (L.) Ait. konnte eine Verbindung, zunächst als Gelsemium-Alkaloid A bezeichnet, in reiner Form dargestellt und ihre Konstitution als N-1-Methoxygelsemin aufgeklärt werden. Für die Strukturermittlung erwies sich die Massenspektrometrie als besonders wertvoll. Die Massenspektren einiger Gelsemiumalkaloide sind wiedergegeben, die Fragmentierung dieser Verbindungen wird diskutiert.Au\erdem wurde eine größere Anzahl neuer Basen in kleiner Menge nachgewiesen.

---

Contributions to mass-spectrometry of gelsemium-alkaloids (The structure of gelsemium-alkaloid A)

From the minor alkaloids ofGelsemium sempervirens (L.) Ait., one compound, preliminary designated as Gelsemiumalkaloid A, could be isolated and was identified as N-1-Methoxy-gelsemine. For the structure-elucidation mass-spectrometry has been proven to be of great value. Mass spectra of some Gelsemium-alkaloids are reported and the fragmentation of these compounds is discussed.There were further detected a quantity of new alkaloids in small amounts.

---

---

Mit 7 Abbildungen

---

Anmerkung bei der Korrektur (23.10.1972): Während der Drucklegung dieser Arbeit erschien eine Publikation vonE. Wenkert u. Mitarb. [Exper.28, 377 (1972)], in der die Struktur des Gelsevirins als N-1-Methoxy-gelsemin angegeben wird; somit ist Gelsemium-Alkaloid A offensichtlich mit Gelsevirin identisch. Eine solche Identifizierung was uns nicht möglich, da einerseits kein authentisches Präparat von Dr.Marion verfügbar was (Brief von Dr.Edwards, Ottawa, vom 21.6.1971) und andrerseits die wenigen, bisher veröffentlichten Daten über Gelsevirin hierfür nicht ausreichen.     

A sugar's choice: coordination to a mononuclear or a dinuclear copper(II) complex?

We proposed a decisive role of the number of metal ions at the sugar binding site for carbohydrate-coordinating copper(II) complexes. To verify this hypothesis, we studied the binding of the representatively chosen carbohydrates D-ribose (7), D-mannose (8), D-glucose (9), and D-maltose (10) to structurally related mono- and dinuclear copper(II) complexes in alkaline solution. All carbohydrates coordinate to the metal complexes in a 1:1 molar ratio. Coordination of 7 or 8 to the dinuclear copper(II) complex 1 is about 0.5 order of magnitude stronger than the complex formation with related mononuclear complexes. On contrast, 9, which is an epimer of 8, coordinates stronger to either one of the mononuclear copper(II) complexes in alkaline aqueous solution.     

Mikroreflexionsmessungen zur Untersuchung dünner Oberflächenschichten

Zusammenfassung Es wird eine einfache optische Methode zur Dickenbestimmung dünner Oberflächenfilme beschrieben, die sich besonders zur Untersuchung von Korrosionsschichten eignet.

---

Investigation of thin corrosion layers by microreflexion measurement

A simple optical method for the determination of thin surface films is described. It is especially suitable for the thin corrosion layer investigation.

---

---

Mit 1 Abbildung

---

Meinem verehrten Lehrer, Prof. Dr.H. Nowotny, gewidmet.     

Evaluation of aortic stenosis severity using 4D flow jet shear layer detection for the measurement of valve effective orifice area

Aims

The objective of this study was to evaluate the potential of 4D flow MRI to assess valve effective orifice area (EOA) in patients with aortic stenosis as determined by the jet shear layer detection (JSLD) method.

Methods and Results

An in-vitro stenosis phantom was used for validation and in-vivo imaging was performed in 10 healthy controls and 40 patients with aortic stenosis. EOA was calculated by the JSLD method using standard 2D phase contrast MRI (PC-MRI) and 4D flow MRI measurements (EOA_JSLD-2D and EOA_JSLD-4D, respectively). As a reference standard, the continuity equation was used to calculate EOA (EOA_CE) with the 2D PC-MRI velocity field and compared to the EOA_JSLD measurements. The in-vitro results exhibited excellent agreement between flow theory (EOA = 0.78 cm²) and experimental measurement (EOA_JSLD-4D = 0.78 ± 0.01 cm²) for peak velocities ranging from 0.9 to 3.7 m/s. In-vivo results showed good correlation and agreement between EOA_JSLD-2D and EOA_CE (r = 0.91, p < 0.001; bias: − 0.01 ± 0.38 cm²; agreement limits: 0.75 to − 0.77 cm²), and between EOA_JSLD-4D and EOA_CE (r = 0.95, p < 0.001; bias: − 0.09 ± 0.26 cm²; limits: 0.43 to − 0.62 cm²).

Conclusion

This study demonstrates the feasibility of measuring EOA_JSLD using 4D flow MRI. The technique allows for optimization of the EOA measurement position by visualizing the 3D vena contracta, and avoids potential sources of EOA_CE measurement variability.     

Relating field theories via stochastic quantization

This note aims to subsume several apparently unrelated models under a common framework. Several examples of well-known quantum field theories are listed which are connected via stochastic quantization. We highlight the fact that the quantization method used to obtain the quantum crystal is a discrete analog of stochastic quantization. This model is of interest for string theory, since the (classical) melting crystal corner is related to the topological A-model. We outline several ideas for interpreting the quantum crystal on the string theory side of the correspondence, exploring interpretations in the Wheeler–De Witt framework and in terms of a non-Lorentz invariant limit of topological M-theory.     

Silica‐Coating of Hematite Nanoparticles Using Reactive Water‐Soluble Polyalkoxysiloxanes

In this article, we report on a new one‐step synthetic route to obtain multi‐functional silica‐coated hematite particles using a water‐based surfactant‐free technology. The synthesis and properties of uniform silica‐coated hematite particles with adjustable size, morphology, and silica shell thickness are discussed in detail. The developed method allows simultaneous formation of the silica shell around hematite core and incorporation of reactive groups on the surface of core–shell nanoparticles. Vinyl groups are introduced to the silica surface at once by pre‐functionalization of a water‐soluble hyperbranched polyalkoxysiloxanes with active double bonds. The reactivity of these surface‐immobilized vinyl groups is demonstrated by covalent attachment of rhodamine B using a thiol‐en click reaction.     

Spatial and temporal resolution effects on dynamic contrast-enhanced magnetic resonance mammography

We tested the hypothesis that partial volume effects due to poor in-plane resolution and/or low temporal resolution used in clinical dynamic contrast-enhanced magnetic resonance imaging results in erroneous diagnostic information based on inaccurate estimates of tumor contrast agent extravasation and tested whether reduced encoding techniques can correct for dynamic data volume averaging. Image spatial resolution was reduced from 469 x 469 microm2 to those reported below by selecting a subset of k-space data. We then compared the top five K(trans)/V(T) "hot spots" obtained from the original data set, 469 x 469-microm in-plane spatial resolution and an 18-s temporal resolution processed by fast Fourier transform (FFT), with values obtained from data sets having in-plane spatial resolutions of 938 x 938, 1875 x 1875 and 2500 x 2500 microm2 and a temporal resolution of 18 s, or data sets with temporal resolutions of 36, 54 and 72 and a spatial resolution of 469 x 469 microm2, and found them to statistically differ from the parent data sets. We then tested four different post processing methods for improving the spatial resolution without sacrificing temporal resolution: zero-filled FFT, keyhole, reduced-encoding imaging by generalized-series reconstruction (RIGR) and two-reference RIGR (TRIGR). The top five values of K(trans)/V(T) obtained from data sets, the in-plane spatial resolutions of which were improved to 469 x 469 microm2 by zero-filling FFT, Keyhole and RIGR, statistically differed from those obtained from the original 469 x 469 microm2 FFT parent image data set. Only the 938 x 938 and 1875 x 1875 microm2 data sets reconstructed to 469 x 469 microm2 with TRIGR reconstruction method yielded values of the top five K(trans)/V(T) hot spots statistically the same as the original parent data set, 469 x 469 microm2 in-plane spatial and 18-s temporal-resolution FFT. That is, partial volume effects from data sets of different in-plane spatial resolution resulted in statistically different values of the top five K(trans)/V(T) hot spots relative to a high spatial and temporal resolution data set, and TRIGR reconstruction of these low resolution data sets to high resolution images provided statistically similar values with a savings in temporal resolution of 2 to 4 times.     

The Gauge–Bethe Correspondence and Geometric Representation Theory

The Gauge/Bethe correspondence of Nekrasov and Shatashvili relates the spectrum of integrable spin chains to the ground states of supersymmetric gauge theories. Up to now, this correspondence has been an observation; the underlying reason for its existence remaining elusive. We argue here that geometrical representation theory is a mathematical foundation of the Gauge/Bethe correspondence, and it provides a framework to study families of gauge theories in a unified way.