Hydromagnetic instability of streaming fluids in porous medium

The instability of the plane interface between two uniform, superposed, electrically conducting and counter-streaming fluids through a porous medium is considered in the presence of a horizontal magnetic field. In the absence of surface tension, perturbations transverse to the direction of streaming are found to be unaffected by the presence of streaming if perturbations in the direction of streaming are ignored. For perturbations in all other directions there exists instability for a certain wavenumber range. The instability of this system is postponed by the presence of magnetic field. The magnetic field and surface tension are able to suppress this Kelvin-Helmholtz instability for small wavelength perturbations and the medium porosity reduces the stability range given in terms of a difference between the streaming velocities and the Alfvén velocity.This research forms a part of the research project awarded to the first author (R.C.S.) by the University Grants Commission.     

Sorption and concentration of51Cr(VI) traces on TiO2 and ZrO2 by radioindicator study

The carrier technique has been used to concentrate Cr(VI) radiometrically by studying the carrying efficiency as a function of pH of aqueous medium, added ions, carrying capacity, amount of carrier and subsequent desorption of the activity adsorbed under optimum experimental conditions. The study shows that under optimum experimental conditions, 0.15 g of ZrO₂ and 0.25 g of TiO₂ carry 0.01 mg and 0.001 mg of chromium respectively. Further, the activity carried under the specified conditions can be recovered more or less quantitatively by leaching the carrier.     

Antimicorbial effects of newly synthesized organotin(IV) and organolead(IV) derivatives

Triorganotin(IV) and triorganolead(IV) derivatives of the types Me₃Sn(SCZ) and Ph₃Pb(SCZ) (where SCZ^? is the anion of a semicarbanzone ligand) have been synthesized by substitution reactions of trimethyltin chloride and triphenyl-lead chloride with semicarbazones derived from heterocyclic ketones. The resulting complexes have been characterized by elemental analyses, molecualr weight determinations and conductivity measurements. The mode of bonding has been established on the basis of infrared and ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopic studies. Some respresentative complexes have also been evaluated for their antimicrobial effects on different species of pathogenic fungi and bacteria; the results of these investigations have been reported in the present paper.     

Spin density distributions in some fluorinated radical cations

A theoretical study of π-electron spin density distributions has been made for a series of fluoro-substituted hydrocarbon radical cations using unrestricted Hartree-Fock theory. Although some of the predicted proton splittings are not in very good agreement with experiment, the overall agreement with experiment can be passed as fairly satisfactory considering the approximate nature of the theory used. The experimental fluorine splittings can be well predicted by using a one-parameter relationship between the isotropic fluorine splitting (a_F) and the π-electron spin density (ρ_CC) on the attached carbon. It has been further shown that both ρ_CC and the proportionality constant (Q_eff) in the linear relation, are fairly insensitive to the parameter choice.     

Translucent nanolatexes through emulsion polymerisation of ethyl acrylate

Turbid emulsion systems of ethylacrylate/sodium dodecyl sulphate/water with monomer to surfactant (M/S) ratios 10 and 40 were transformed into stable transparent/translucent nanolatexes through emulsion polymerisation using potassium persulphate as an initiator. The latex particle size was observed to be similar to that obtained by true microemulsion polymerisation where M/S ratio is one. The kinetic plots exhibited two intervals upto M/S ratios 10. AIBN initiated systems showed separation of two phases for the M/S ratio ?10. M/S ratios were varied from 1 to 54 for the comparative study of polymerisation in emulsion and microemulsion media. Gel effect dominance was observed around 40-60% conversion for the microemulsion polymerisation of ethylacrylate. Only one chain per particle was observed for microemulsion system with M/S ratio 1 and three to four chains per particle were observed for the systems with M/S ratios 10 and 40. Unlike M/S=1 system, higher dependency of polymerisation rate on initiator concentration was observed for the systems with M/S=10 and 40. A possible mechanism for such a transformation has been proposed.     

Phase structures of a hydrated anionic phospholipid composition containing cationic dendrimers and pegylated lipids

The effect of 4th generation poly(amidoamine) dendrimer (4G PAMAM) present in an anionic phospholipid composition, consisting of hydrogenated soyphosphatidylcholine (HSPC), cholesterol (CH), dicetyl phosphate (DCP), and poly(ethylene glycol) (Mw approximately 2000) derivatized phosphatidylethanolamine (PEG2000-PE), on the hydration and liquid crystalline structure formation was investigated. The optical and polarized light microscopies of the liposomal dispersion obtained from the hydrated lipid composition show two types of birefringent structures (mesophases): plastic, wormlike microstructures and conventional, over-elongated lamellae. Differential scanning calorimetry (DSC) shows an increase in the liquid crystalline phase transition (Tg) of the lipid composition from 60 to 94 degrees C with increasing 4G PAMAM concentrations from 0 to 0.011 mM, respectively. The Tg values of the two microstructures were 68 and 84 degrees C, respectively, indicating that the plastic microstructures were 4G PAMAM/DCP-complexes-rich (alpha mesophases) and the conventional and elongated lamellae were dendrimer-doped HSPC/CH-rich microstructures (beta mesophases). Optical microscopy shows that the alpha mesophases convert into various other types of vesicular structures such as giant unilamellar vesicles and biliquid foams, upon heating above the phase transition temperature of the lipid composition (approximately 60-65 degrees C). The microstructure transformation is a result of an osmotic influx of water and the detergent action of PEG2000-PE present in the lipid composition. The transmission electron microscopy (TEM) images of the liposomal dispersion show particles embedding circular transparent domains that exactly correlate to the theoretical 4G PAMAM/DCP complex sizes, thus, providing evidence of 4G PAMAM interspersed within the two mesophases. Small-angle X-ray scattering (SAXS) measurements indicate that the alpha mesophases are a dendrimer-interlinked, symmetrically undulated lamellar phase and the beta mesophases are dendrimer-doped, occasionally kinked lamellae. An increase in dendrimer concentration in the lipid composition was found to decrease interlamellar spacing. On the basis of optical microscopy, DSC, TEM, and SAXS data, a model of dendrimer-doped mesophase structure and lamellae fusion is proposed. This investigation provides new self-assembled materials for drug/gene delivery and supplements the understanding of mechanisms involved in various biological processes such as membrane fusion, transmembrane permeation, and endocytosis.     

Effect of Fe addition on the crystallization behaviour and Curie temperature of CoCrSiB-based amorphous alloys

The crystallization behaviour and Curie temperature of melt-spun Co_{71? x} Fe _x Cr₇Si₈B₁₄ (x?=?0, 2, 3.2, 4, 6, 8 and 12?at.%) amorphous alloys have been studied. Differential scanning calorimetry (DSC) showed two stages of crystallization. The first stage of crystallization (T _X1) in the alloy with 6?at.%?Fe was the highest and it had the highest activation energy. X-ray diffraction studies revealed that the primary crystalline phase is hcp-(CoCr)₂Si for Fe-free alloy, whereas (CoFeCr)₂Si and (CoFeCr)₃Si phases were formed with the addition of Fe. hcp-Co was also formed along with these phases. The secondary crystalline phases were fcc-Co and various boron-rich phases. The Curie temperature of the alloys also changed with the addition of Fe to the system. Like the primary crystallization temperature, the Curie temperature of the alloys did not vary systematically with the Fe content. The addition of Fe to the Co-based system changes the nearest-neighbour interaction. This changes the exchange interaction between the transition metal elements. Due to the asymmetry in the Bethe–Slater curve, a systematic variation with Fe addition was not observed in the Curie temperature measurement.     

An eco-safe approach to benzopyranopyrimidines and 4H-chromenes in ionic liquid at room temperature

An environmentally benign, ionic liquid promoted multicomponent protocol to benzopyrano(2,3-d)pyrimidines and 4H-chromenes has been developed at room temperature. Results of the reaction depend on the nature of the nucleophile used in the reaction. Secondary amines result in the formation of benzopyrano(2,3-d)pyrimidines, whereas thiols give rise to 4H-chromenes under the same set of reaction conditions.     

Fabrication and characterization of electrochemical double layer capacitors using ionic liquid-based gel polymer electrolyte with chemically treated activated charcoal electrodes

The present investigation deals with electrochemical double layer capacitors (EDLCs) made up of ionic liquid (IL)-based gel polymer electrolytes with chemically treated activated charcoal electrodes. The gel polymer electrolyte comprising of poly(vinylidine fluoride-co-hexafluropropylene) (PVdF-HFP)–1-ethyl-2,3-dimethyl-imidazolium-tetrafluroborate [EDiMIM][BF₄]–propylene carbonate (PC)–magnesium perchlorate (Mg(ClO₄)₂) exhibits the highest ionic conductivity of ~8.4?×?10^?3?S?cm^?1 at room temperature (~20 °C), showing good mechanical and dimensional stability, suitable for their application in EDLCs. Activation of charcoal was done by impregnation method using potassium hydroxide (KOH) as activating agent. Brunauer–Emmett–Teller (BET) studies reveal that the effective surface area of treated activated charcoal powder (1,515 m²?g^?1) increases by more than double-fold compared to the untreated one (721 m²?g^?1). Performance of EDLCs has been tested using cyclic voltammetry, impedance spectroscopy, and charge–discharge techniques. Analysis shows that chemically treated activated charcoal electrodes have almost triple times more capacitance values as compared to the untreated one.