Atom lithography without laser cooling

Using direct-write atom lithography, Fe nanolines are deposited with a pitch of 186 nm, a full width at half maximum (FWHM) of 50 nm, and a height of up to 6 nm. These values are achieved by relying on geometrical collimation of the atomic beam, thus without using laser collimation techniques. This opens the way for applying direct-write atom lithography to a wide variety of elements.     

The influence of contact surface microstructure on vacuum arcstability and voltage

The authors present the results of DC vacuum arc lifetime and voltage measurements for contacts with different surface microstructures. This was realized by treating the contact surface with emery paper of varying roughness. The contact surface microstructure was found to have a large effect on the DC arc lifetime (several tens of times difference at the most) and arc voltage (30% difference at the most). The mechanism of the surface microstructure effect on DC arc stability was analyzed and is explained preliminarily. The rougher the contact surface is, the longer the arc lifetime and the more stable. The arc itself has a tendency to condition the surface in a way that is unfavorable for a sustained arc lifetime. The crater size for a rough surface is smaller than for a smooth one. The rougher the contact is, the lower the arc voltage (both DC and HF components). The arc erosion has a tendency to increase the arc voltage. It is probable that type I cathode spots (fast motion, small crater size) correspond not only to the surface contamination, but also to the surface roughness     

PHOTOSENSITIZING PROPERTIES OF BACTERIOCHLOROPHYLLIN a and BACTERIOCHLORIN a, TWO DERIVATIVES OF BACTERIOCHLOROPHYLL a

Abstract The photosensitizing properties of two water soluble derivatives of bacteriochlorophyll a , bacteriochlorophyllin a and bacteriochlorin a (lacking the central Mg-ion) were investigated and compared to those of hematoporphyrin derivatives. At physiological pH the oxygen consumption rate of histidine, tryptophan, dithiothreitol and guanosine upon illumination was 3 to 4 times higher when bacteriochlorin a was used as photosensitizer than when hematoporphyrin derivatives were used. Especially bacteriochlorin a proved to be an effective sensitizer for the killing of L929 cells. Because bacteriochlorin a has an absorption maximum at 765 nm in phosphate buffered saline (allowing a light penetration in tissue about ten times larger than at 630 nm) and a high molar absorption coefficient (32 000 M cm⁻¹) it has promising possibilities for the application in photodynamic therapy.     

SSZ‐27: A Small‐Pore Zeolite with Large Heart‐Shaped Cavities Determined by Using Multi‐crystal Electron Diffraction

The high‐silica zeolite SSZ‐27 was synthesized using one of the isomers of the organic structure‐directing agent that is known to produce the large‐pore zeolite SSZ‐26 ( CON ). The structure of the as‐synthesized form was solved using multi‐crystal electron diffraction data. Data were collected on eighteen crystals, and to obtain a high‐quality and complete data set for structure refinement, hierarchical cluster analysis was employed to select the data sets most suitable for merging. The framework structure of SSZ‐27 can be described as a combination of two types of cavities, one of which is shaped like a heart. The cavities are connected through shared 8‐ring windows to create straight channels that are linked together in pairs to form a one‐dimensional channel system. Once the framework structure was known, molecular modelling was used to find the best fitting isomer, and this, in turn, was isolated to improve the synthesis conditions for SSZ‐27.     

The synthesis of translucent polymer nanolatexes via microemulsion polymerization

Surface-enhanced Raman scattering (SERS)-active substrates of polyvinyl alcohol/gold-silver (PVA/Au-Ag) nanofibers were prepared using a simple approach involving electrospinning. The tunable surface plasmon resonance (SPR) of gold-silver alloy (Au-Ag alloy) nanoparticles (NPs) was achieved by controlling the feed ratio between gold and silver precursors. A higher concentration of Au-Ag alloy NPs could be obtained than the conventional methods, using 1wt% of PVA as the stabilizer. The Au-Ag alloy structure was demonstrated by HRTEM and STEM-EDX. After the electrospinning, the Au-Ag alloy NPs were successfully embedded in PVA nanofibers, as shown in the SEM and TEM images. Raman spectra displayed an apparent enhancement in the signal of 4-mercaptobenzoic acid (4-MBA), pyridine, and thiophenol molecules pre-absorbed from their ethanol solution onto the PVA/Au-Ag nanofibers. Different SERS effects were achieved by varying the Au content or excitation wavelength.     

Synthesis and Structure Determination of SCM-15: A 3D Large Pore Zeolite with Interconnected Straight 12×12×10-Ring Channels

A new germanosilicate zeolite named SCM-15 (Sinopec Composite Material No. 15), the first zeolite containing a 3-dimensional (3D) channel system with interconnected 12-, 12-, and 10-ring channels (pore sizes: 6.1×7.2, 6.1×7.4, and 5.2×5.9 Å), has been synthesized using neutral 4-pyrrolidinopyridine as organic structure-directing agents (OSDAs). Its structure has been determined by combining single-crystal electron diffraction (SCED) and synchrotron powder X-ray diffraction (SPXD) data. The unique open framework structure of SCM-15 is related to that of FOS-5 ( BEC ), ITQ-7 ( ISV ), PKU-16 ( POS ), ITQ-26 ( IWS ), ITQ-21, Beta polymorph B, and SU-78B, since all these framework structures can be constructed from similar chains which are connected through shared 4-ring or double 4-ring (d4r) units. Based on this relation, six topologically reasonable 3D large or extra-large pore hypothetical zeolites are predicted.     

Selective oxidation of methane by the bis(mu-oxo)dicopper core stabilized on ZSM-5 and mordenite zeolites

This work reports on the capability of the O2-activated Cu-ZSM-5 and Cu-MOR zeolites to selectively convert methane into methanol at a temperature of 398 K. A strong correlation between (i) the activity and (ii) the intensity of the 22 700 cm-1 UV-vis band, assigned to the bis(mu-oxo)dicopper core, is found (i) as a function of the reaction temperature, (ii) as a function of the Cu loading of the zeolite, and (iii) in comparison to other Cu materials. These three lines of evidence firmly support the key role of the bis(mu-oxo)dicopper core in this selective, low-temperature hydroxylation of methane.