4D Printing based piezoelectric composite for medical applications

Additive manufacturing (AM), otherwise known as three‐dimensional (3D) printing, is driving major innovations in many areas, such as engineering, manufacturing, art, education, and medicine. Although a considerable amount of progress has been made in this field, additional research work is required to overcome various remaining challenges. Recently, one of the actively researched areas lies in the AM of smart materials and structures. Electroactive materials incorporated in 3D printing have given birth to 4D printing, where 3D printed structures can perform as actuating and/or sensing systems, making it possible to deliver electrical signals under external mechanical stimuli and vice versa. In this paper, we present a lightweight, low cost piezoelectric material based on the dispersion of inorganic ferroelectric submicron particles in a polymer matrix. We report on how the proposed material is compatible with the AM process. Finally, we discuss its potential applications for healthcare, especially in smart implants prostheses. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 109–115     

Oxotitanium(IV) complexes of some bis‐unsymmetric Schiff bases: Synthesis,structural elucidation and biomedical applications

A number of oxotitanium(IV) complexes of the type TiOL with bis‐unsymmetric dibasic tetradentate Schiff base (LH₂) containing ONNO donor atoms have been synthesized. Mono‐Schiff base (OPD‐HNP) was prepared by the condensation of 1:3 molar ratio of 2‐hydroxy‐1‐naphthaldehyde (HNP) with o‐phenylenediamine (OPD). Dibasic unsymmetric tetradentate diamine Schiff bases were prepared by the reaction of OPD‐HNP with 2‐hydroxyacetophenone, 2‐hydroxypropeophenone, benzoylacetone, acetylacetone and ethylacetoacetate. Further, titanylacetylacetonate was reacted with these ligands to obtain their metal complexes. On the basis of analytical and physiochemical data, the formation of complexes as TiOL was suggested having square pyramidal geometry. Quantum mechanical approach also confirmed this geometry. The assessment of the synthesized ligands and their complexes showed that some behave as good inhibitors of mycelial growth against selected phytopathogic fungi but weak inhibitors against some selected bacteria. A few of them also showed antioxidant properties.     

Bright Free-Radical Emission in Ionic Liquids

It is challenging to achieve stable and efficient radical emissions under ambient conditions. Herein, we present a rational design strategy to protect photoinduced carbonyl free radical emission through electrostatic interaction and spin delocalization effects. The host-guest system is constructed from tricarbonyl-substituted benzene molecules and a series of imidazolium ionic liquids as the guest and host, respectively, whereby the carbonyl anion radical emission can be in situ generated under the light irradiation and further stabilized by electrostatic interaction. More importantly, the anion species and the alkyl chain length of imidazolium ionic liquids show a noticeable effect on luminescence efficiency, with the highest radical emission efficiency is as high as 53.3 % after optimizing the imidazole ionic liquid's structure, which is about four times higher than the polymer-protected radical system. Theoretical calculations confirm the synergistic effect of strong electrostatic interactions and that the spin delocalization effect significantly stabilizes the radical emission. Moreover, such a radical emission system also could be integrated with a fluorescent dye to induce multi-color or even white light emission with reversible temperature-responsive characteristics. The radical emission system can also be used to detect different amine compounds on the basis of the emission changes and photoactivation time.     

INAA analysis of fish homogenate: IAEA-436 and IAEA-407

Detailed investigations have been carried out on the well-known method of spectrophotometric determination of boron particularly in uranium compounds as boron-curcumin complex after extraction into 2-ethyl hexane 1,3-diol (EHD) to understand a number of parameters, which have not been addressed earlier in the literature. These include (i) effect of different acid media on analytical results of boron which are employed for dissolution of nuclear fuel samples, (ii) effect of diluents namely ethyl alcohol and N,N-dimethyl formamide on sensitivity of method which are employed for final dilution, and (iii) studies on loss of boron, if any, during conversion of uranium compounds to U₃O₈. Based on the present studies, the existing procedure has been suitably modified to improve the sensitivity in the measurements. In addition, this paper also describes about interference studies with Al, Cr, Mg, Ca, Fe, Mn, Mo, F⁻ and W and amount of EHD on modified method. Absolute detection limit was found to be 10 ng. The precision and accuracy of the method, is 3% at level 100 ng·g⁻¹ of boron.     

Work place air particulate monitoring of automobile workshops for public health and safety

Twenty-eight pairs of coarse and fine air particulate samples were collected in front of an automotive workshop located at Tasmasipabad on Chaklala Road in Rawalpindi using a Gent sampler and polycarbonate filters. These samples were collected during the period; 7th to 27th of April 2009. The gravimetric data (PM_2.5 and PM₁₀) were obtained for these samples and were found to exceed the Pakistani standards. Black carbon (BC) was also determined using reflectance measurements and it was found that BC contributed significantly more to the fine mass than to the coarse fraction; i.e. ~10 to ~3 %, respectively. This is not surprising as soot is emitted by combustion processes and is usually found in the fine particulate mass. Using instrumental neutron activation analysis technique all 28 pairs of filters were analyzed for >30 elements. Major elements, in the coarse mass fraction, include Al, K, Fe, Sr, Na, and Zn implying soil as the major source while BC was found to be a higher contributor of PM_2.5. An episode of high PM_2.5 was observed on the 18th of April 2009. Back trajectory analysis showed that the air mass originated from the Middle East where a dust storm was in progress over Iraq.     

Analytical Characterization of Fatty Acids Composition of Datura alba Seed Oil by Gas Chromatography Mass Spectrometry

Methyl ester derivatives of fatty acids were analyzed for the determination of the constituents of Datura alba seed oil. Gas chromatography coupled to mass spectrometer was used for these analyses. Results delivered that there were saturated as well as unsaturated fatty acids in Datura alba seed oil. Total of 15 different fatty acid components were identified and quantified. Methyl linoleate was found in highest concentration (16.22%) among the identified analytes of interest. In addition methyl esters of Palmitic acid (6.59%), Oleic acid (5.41%) and Stearic acid (1.35%) were found. Concentrations of rest of the detected fatty acids were less than 1%. From the literature it appears that no such work has been performed for the determination of fatty acids in Datura alba seed oil.     

A note on the second problem of Stokes for Maxwell fluids

New exact solutions corresponding to the second problem of Stokes for Maxwell fluids have been established by means of Laplace transforms. For large times, these solutions reduce to the well-known steady-state solutions which are periodic in time and independent of the initial conditions. Furthermore, the transient solutions are in accordance with the previous solutions obtained using the Fourier sine transform. The required time to get the steady-state is determined by graphical illustrations. This time decreases if the frequency of the velocity increases. The effects of the material parameters on the decay of the transients in time are also investigated by graphs.     

Ionic studies of sodium alginate isolated from Sargassum terrarium (brown algea) karachi coast with 2,1-electrolyte

Physical and chemical analysis of the polysaccharide isolated from Sargassum Terarrium (brown algae) of Karachi coast showed characteristics of the sodium alginate. Optical rotations and sulphated ash content were found and FTIR spectra showed a sharp and strong absorption band at 1600 cm^?1 representing carboxylate ion which conforms high uronic acid content of the product. The viscosities of aqueous 0.1% sodium alginate solution were measured in the presence of copper II chloride (CuCl₂). The viscosities were found to be increased with the increase in the concentration of electrolyte. Viscosities were also found affected with temperature. ‘A’ and ‘B’ coefficients of Jones–Dole equation were evaluated. The increase in positive values of ‘B’ coefficient with the rise of temperature led to conclusion that given electrolyte in 0.1% aqueous sodium alginate solution behaves as structure maker. Thermodynamic parameters regarding to activated state like energy of activation E_η, change in free energy of activation ΔG_η and change of entropy of activation ΔS_η were also evaluated. Straight-line plots of log η versus 1/T observed with positive slopes show the effect of temperature on the viscosities of solutions. Energy of activation (E_η) was found to be decreased with the rise of temperature. Change in free energy of activation (ΔG_η) was also found to be increased with increase in concentrations of electrolyte and also with rise of temperature. The values of change in entropy of activation (ΔS_η) were also calculated. Negative values of ΔS_η were found to be increased with increase in concentration of electrolyte and also with rise of temperature.     

Assessing soil pollution from a municipal waste dump in Islamabad, Pakistan: a study by INAA and AAS

INAA and AAS techniques have been employed to determine 40 elements in soil of a municipal waste dump in sector H-11, Islamabad. Background soil was also analyzed to study the extent of contamination of the dump site soil. Most of the major elements in these soils represented the geochemical composition of the soil in this area. The enrichment factors for quantified elements identified high Sb and Mg contents that could be attributed to the presence of PET and food materials in the waste. Geo-accumulation Index (I _geo), Pollution Index (PI) and the Integrated Pollution Index (IPI) have also been calculated for all elements. The values for these indices show that municipal waste has distorted the soil ambiance and the soil of waste dump site is slightly to moderately polluted as compared to the background soil. The dump soil was found to be moderately polluted by the elements Ba, Br, Ga, Rb, Zn, Ni and Pb. Significantly high Cu, Mg and Sb contamination was observed for the waste soil that is likely to pose an environmental issue if current waste disposal procedures are continuously employed.