Electron spin resonance study on polymerization of alkyl acrylates with n-butyl titanate(IV)–triethylaluminum catalyst

n-Butyl titanate(IV)–triethylaluminum catalyst at Al/Ti molar ratios greater than 6 polymerizes methyl and n-butyl acrylates at ?78°C. The polymerization system which includes methyl acrylate at ?78°C, gives two ESR signals with g factors of 1.958 and 1.961 that overlap each other. The absorption intensity of the latter signal is approximately proportional to the polymer chain concentration calculated from polymer yield and the molecular weight. The polymerization system at Al/Ti ratios smaller than 3 has no catalytic activity on the polymerization and shows only the ESR signal with the g factor of 1.958. On the basis of these facts the ESR signal with the g factor of 1.961 is attributed to the active growing end of poly(methyl acrylate) with this catalyst. The character of this active growing end is discussed.     

Synthesis and properties of segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers

New segmented aromatic poly(ether sulfone)-amide and poly(ether sulfone)-imide copolymers were synthesized by the chain extension of α,w-diamine-terminated poly(ether sulfone) oligomer with both aromatic dicarboxylic acid chlorides and tetracarboxylic dianhydrides, respectively. Crystallization of the poly(ether sulfone)unit was suppressed by the introduction of amide or imide linkage along the polymer backbone, giving amorphous copolymers that were +eadily soluble in various organic solvents. The copolymers had somewhat higher glass transition temperatures than the parent poly(ether sulfone). They afforded transparent and tough films by solution casting. © 1992 John Wiley & Sons, Inc.     

Meso-tetrakis[o-(N-methyl)pyridinium]porphyrin ensembles with axially coordinated cyclodextrin-penetrating phenethylimidazole: reversible dioxygen-binding in aqueous DMF solution

alpha-Cyclodextrin (alpha CD)-penetrating 2-methyl-1-phenethylimidazole coordinates to the zinc(II) and iron(II) complexes of meso-tetrakis[o-(N-methyl)pyridinium] porphyrinate, giving non-covalently linked alpha CD-porphyrin ensembles; the iron(II) complex can reversibly bind and release dioxygen in aqueous DMF solution.     

Absorption and fluorescence of a nonionic detergent in aqueous solution

The absorption and fluorescence spectra of a detergent, polyoxyethylene octylphenyl ether, were measured in water at different concentrations. The absorption spectra had a peak at 275 mμ and a shoulder at 281 mμ. The spectra were independent of concentration below the critical micelle concentration, but the molar extinction coefficients of the peak and the shoulder increased with concentration above the critical micelle concentration. The critical micelle concentration value derived from the absorption data was in good agreement with those obtained by other methods. The fluorescence spectra of the detergent in water were independent of concentration in dilute solutions, if the intensities of the spectra were normalized at the peak at 302 mμ. At higher concentrations, a weak excimer band appeared at 345 mμ, whose intensity increased with concentration. The excimer band manifested itself at a concentration slightly lower than the critical micelle concentration. The main band decreased and the excimer band increased, as the temperature was raised. An excimer band was observed in the same region of the spectra for the pure detergent, either in the solid or liquid state. The equilibrium solid spectra exhibited a very strong excimer emission. It was concluded that the excimers were formed within micelles in the case of aqueous solutions.     

Preparation of AB polyacylthioureas and related copolyacylthioureas

Reaction of sulfinylaminobenzoyl chlorides with lead thiocyanate gave sulfinylaminobenzoyl isothiocyanates (SBIs), from which were derived aminobenzoyl isothiocyanate hydrochlorides (ABIHs). AB polyacylthioureas (PATUs) with inherent viscosities of up to 0.28 dL/g were obtained by treating the SBI with an equivalent of water in N-methyl-2-pyrrolidone (NMP). Low-temperature solution polyaddition of the ABIH afforded AB PATU with inherent viscosities of up to 0.66 dL/g, which were further increased to as high as 0.75 dL/g by adding lithium bases to the polymerization mixtures. Polyaddition of isophthaloyl diisothiocyanate with intermediate diamines formed by hydrolyzing the adducts of SBI and aromatic diamines afforded copolyacylthioureas with inherent viscosities of up to 1.15dL/g. The copolymers were generally soluble in NMP, whereas solubilities of the AB PATU in analogous solvents were relatively low. Thermogravimetric analyses in both air and nitrogen exhibited weight losses of 5% at 204–236°C for AB PATU and at 170–192°C for the copolymers.     

Radiation-induced addition reaction of carbon tetrachloride onto 1,2-polybutadiene

The γ-ray-induced addition reaction of carbon tetrachloride onto syndiotactic 1,2-polybutadiene film and liquid 1,2-polybutadiene was carried out at room temperature. In the film gelation was pronounced and the rate of addition increased as the crystallinity of the polymer decreased. In the liquid gelation, which makes the polymer insoluble in carbon tetrachloride, did not take place, although a definite crosslinking reaction was noticed. In this case the appearance of the product changed from a viscous liquid to a white powder as the reaction proceeded. Its structure was compared with that of chlorinated 1,2-polybutadiene. The addition of carbon tetrachloride to the vinyl group in liquid 1,2-polybutadiene caused an anti-Markownikoff-type reaction and was accompanied by an unexpectedly large vinyl depletion in the polymer. The total decrease in the vinyl group was found to be much larger than that brought about by the addition of carbon tetrachloride. This discrepancy was attributed to a cyclization and crosslinking reaction ascribed to the vinyl group bound by the main chain. Cyclization and crosslinking were less noticeable in the chlorination than in the carbon tetrachloride.     

Solvent extraction of permanganates (Na, K) by 18-crown-6 ether from water into 1,2-dichloroethane: elucidation of an extraction equilibrium based on component equilibria

Ion-pair formation constants (K_MLA mol⁻¹ dm³) of Na⁺– and K⁺–18-crown-6 ether (18C6) complexes with MnO₄⁻ in water (w) were determined potentiometrically at 25 °C. Simultaneously, extraction constants (K_ex mol⁻² dm⁶) of the permanganates with 18C6 from w into 1,2-dichloroethane at 25 °C were obtained from the spectrophotometric determination of distribution ratios of the permanganates. These K_ex values were divided into K_MLA and other three component equilibrium constants and thereby extraction-selectivity and -ability were discussed in comparison with corresponding metal picrate–18C6 extraction systems reported before.     

Control of separation selectivity in micellar electrokinetic chromatography by modification of the micellar phase with solubilized organic compounds

On the basis of the data on the distribution of various neutral solutes between sodium dodecyl sulfate (SDS) micelles and water, the control of separation selectivity in micellar electrokinetic chromatography (MEKC) by modification of the micellar phase with organic additives has been proposed and applied to the separation of simple model compounds. It was found that the distribution constants between the micelles and water (K_d,mc), which were determined by means of MEKC, of the solutes possessing hydrophilic functional groups are much larger than those between heptane and water (K_d,hep), whereas the K_d,mc values of the solutes possessing no hydropholic groups are comparable to their K_d,hep values. This indicates that the former solutes are preferentially solubilized in the Stern layer of the micelles and that the latter are located in the hydrocarbon core. In MEKC separations of aromatic compounds and metal acetylacetonates, considerable changes in separation selectivity were caused by the addition of compounds possessing both hydrophilic functional groups such as alcohols, phenol and ketones to the SDS micellar solution. The variations of the retention factors of the analytes could be explained in terms of saturation of the solubilization sites in the Stern layer with the modifiers, specific interaction of the modifiers with the analytes via hydrogen bonding in the micelles, and expansion of the core volume with the hydrocarbon parts of the modifiers. Such effects of the micellar modification could improve the resolution as well as the selectivity of MEKC separations.     

Tetraalkylammonium Picrates in the Dichloromethane–Water System: Ion-Pair Formation and Liquid–Liquid Distribution of Free Ions and Ion Pairs

Equilibria concerning picrates of tetraalkylammonium ions (Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, Bu₃MeN⁺) in a dichloromethane−water system have been investigated at 25 ^∘C. The 1:1 ion-pair formation constants (K _IP,o ^o) in dichloromethane at infinite dilution were conductometrically determined. The distribution constants (K _D ^o) of the ion pairs and the free cations between the solvents were determined by a batch-extraction method. The K _IP,o ^o value varies in the cation sequence, Bu₄N⁺ ≈ Pr₄N⁺ ≈ Et₄N⁺ < Bu₃MeN⁺ < < Me₄N⁺; this trend is explained by the electrostatic cation−anion interaction taking into account the structures of the ion pairs determined by density functional theory calculations. For the ion pairs of the symmetric R₄N⁺ cations, there is a linear positive relationship between log₁₀ K _D ^o and the number of methylene groups in the cation (N _{CH 2}). The ion pair of asymmetric Bu₃MeN⁺ has a higher distribution constant than that expected from the above log₁₀ K _D ^o versus N _{CH 2} relationship. These cation dependencies of log₁₀ K _D ^o for the ion pairs are explained theoretically by using the Hildebrand-Scatchard equation. For all the cations, the log₁₀ K _D ^o value of the free cation increases linearly with N _{CH 2}; the variation of log₁₀ K _D ^o is discussed by decomposing the distribution constant into the Born-type electrostatic contribution and the non-Born one, and attributed to the latter that is governed by the differences in the molar volumes of the cations. The cation dependencies of the ion-pair extractability and ion pairing in water are also discussed. An erratum to this article can be found at     

Chemical synthesis of cyclodextrins by using intramolecular glycosylation

An efficient synthesis of cyclodextrins (CDs) by using the intramolecular glycosylation is demonstrated. alpha-CD, an alpha(1-->4)linked hexaglucoside, was prepared via a block condensation of three maltose units. A modified key maltose intermediate as a precursor to both glycosyl donor and acceptor components was prepared in 6 steps starting from maltose. All the glycosylation for chain elongation and cyclization of saccharides was carried out after tethering the donor to the acceptor by the phthaloyl bridge to give the desired saccharides in good yields with complete alpha-selectivity. delta-CD composed of 9 glucose units was synthesized by the same manner from three maltotriose units.