Interaction of different types of nanocages (Al12N12, Al12P12, B12N12, Be12O12, Mg12O12, Si12C12 and C24) with HCN and ClCN: DFT,TD-DFT,QTAIM, and NBO calculations

In this work, the ability of different types of nanocages including Al₁₂N₁₂, Al₁₂P₁₂, Be₁₂O₁₂, B₁₂N₁₂, Si₁₂C₁₂, Mg₁₂O₁₂ and C₂₄ for the adsorption and detection of poisonous gases HCN and ClCN has been investigated, theoretically using the D3 dispersion corrected density functional theory (DFT-D3). The absorption spectra of HCN–nanocage and ClCN–nanocage complexes were calculated by the time-dependent density functional theory (TD-DFT) and compared with the calculated absorption spectrum of isolated nanocage to investigate the ability of nanocage for sensing of HCN and ClCN gases. It was found that the strongest interaction between HCN (ClCN) molecule and nanocage takes place when the molecule is adsorbed via its N atom on the surface of nanocage except for C₂₄. Also, it was shown that the Al₁₂N₁₂ is the best adsorbent for HCN and ClCN gases among the selected nanocages and Si₁₂C₁₂ is the best sensor for the detection of these gases using the electroconductivity and absorption spectroscopy techniques.     

Inhomogeneous Voter Models in One Dimension

We establish conditions for survival and extinction of types of one-dimensional voter models, and show that increasing the flip rates at a finite number of sites typically does not affect survival, unless the flipping mechanism is altered. We provide an example of a modified voter model that does not survive but can be made to survive simply by altering the flip mechanism at one site. We also show that a rather general class of such models have clustering behavior.     

Emission spectrum of hot HDO below 4000 cm

Fourier transform emission spectra were recorded using a mixture of H₂O and D₂O at a temperature of 1500 °C. The spectra were recorded in three overlapping sections and cover the wavenumber range 1800-3932 cm⁻¹. This spectrum is analyzed together with a previously reported one spanning the 380-2190 cm⁻¹ range [Parekunnel et al., J. Mol. Spectrosc. 2001 (28) 101]. This analysis leads to 4409 newly assigned HDO emission lines. This work particularly extends data on the (200) and (120) states of HDO for which newly determined energy levels are presented.     

Spectroscopically determined potential energy surfaces of the H2O, H2O, and H2O isotopologues of water

Adiabatic potential energy surfaces (PESs) for three major isotopologues of water, H₂¹⁶O, H₂¹⁷O, and H₂¹⁸O, are constructed by fitting to observed vibration-rotation energy levels of the system using the nuclear motion program DVR3D employing an exact kinetic energy operator. Extensive tests show that the mass-dependent ab initio surfaces due to Polyansky et al. [O.L. Polyansky, A.G. Császár, S.V. Shirin, N.F. Zobov, P. Barletta, J. Tennyson, D.W. Schwenke, P.J. Knowles, Science 299 (2003) 539-542.] provide an excellent starting point for the fits. The refinements are performed using a mass-independent morphing function, which smoothly distorts the original adiabatic ab initio PESs. The best overall fit is based on 1788 experimental energy levels with the rotational quantum number J = 0, 2, and 5. It reproduces these levels with a standard deviation of 0.079 cm⁻¹ and gives, when explicit allowance is made for nonadiabatic rotational effects, excellent predictions for levels up to J = 40. Theoretical linelists for all three isotopologues of water involved in the PES construction were calculated up to 26 000 cm⁻¹ with energy levels up to J = 10. These linelists should make an excellent starting point for spectroscopic modelling and analysis.     

Synthesis,spectral, DFT calculations and antibacterial studies of Fe(III) complexes of new fluorescent Schiff bases derived from imidazo[4',5':3,4]benzo[1,2‐c]isoxazole

New fluorescent heterocyclic ligands were synthesized by the reaction of 8‐(4‐chlorophenyl)‐3‐alkyl‐3H‐imidazo[4',5':3,4]benzo [1,2‐c]isoxazol‐5‐amine with p‐hydroxybenzaldehyde and p‐chlorobenzaldehyde in good yields. The coordination ability of the ligands with Fe³⁺ ion was examined in an aqueous metanolic solution. Schiff base ligands and their metal complexes were characterized by elemental analyses, IR, UV–vis, mass, and NMR spectra. The optical properties of the compounds were investigated and the results showed that the fluorescence of all compounds is intense and their obtained emission quantum yields are around 0.15 – 0.53. Optimized geometries and assignment of the IR bands and NMR chemical shifts of the new complexes were also computed by using density functional theory (DFT) methods. The DFT‐calculated vibrational wavenumbers and NMR chemical shifts are in good agreement with the experimental values, confirming suitability of the optimized geometries for Fe(III) complexes. Also, the 3D‐distribution map for HOMO and LUMO of the compounds were obtained. The new compounds showed potent antibacterial activity and their antibacterial activity (MIC) against Gram‐positive and Gram‐negative bacterial species were also determined. Results of antibacterial test revealed that coordination of ligands to Fe(III) leads to improvement in the antibacterial activity.     

Mizoroki–Heck and Suzuki–Miyaura reactions mediated by poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐stabilized magnetically separable palladium catalyst

The purpose of this work was to synthesize and characterize a new magnetic polymer nanosphere‐supported palladium(II) acetate catalyst for reactions requiring harsh conditions. In this regard, an air‐stable, moisture‐stable and highly efficient heterogenized palladium was synthesized by the coordination of palladium(II) acetate with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐grafted modified magnetic nanoparticles with a core–shell structure. The structure of the newly developed catalyst was characterized using various techniques. The catalytic activity of the resultant nano‐organometallic catalyst was evaluated in Mizoroki–Heck and Suzuki–Miyaura reactions to afford the corresponding coupling products in good to excellent yields. High selectivity as well as outstanding turnover number (14 143, 4900) and turnover frequency (28 296, 7424) values were recorded for the catalyst in Suzuki–Miyaura and Mizoroki–Heck reactions, respectively. Magnetic separation and recycling of the catalyst for at least six runs became possible without any significant loss of efficiency or any detectable palladium leaching.     

Synthesis of Novel 3-(5-(Alkyl/arylthio)-1,3,4-Oxadiazol-2-yl)-8-Phenylquinolin-4(1H)-One Derivatives as Anti-HIV Agents

Novel quinolone derivatives featuring an 1,3,4-oxadiazole ring as a metal-chelating component and a benzyl group base on HIV-1 integrase inhibitors pharmacophore were designed and synthesized. An antiviral assay revealed that most analogues inhibited HIV-1 replication in the cell culture. Our results showed that compounds bearing small alkyl groups as R group were inactive in anti-HIV-1 assay, whereas compounds possessing benzyl or substituted benzyl at the same position showed good anti-HIV activity with the range of 20–57% at 100 μM concentration. Among them, 3-(5-((2-fluorobenzyl)thio)-1,3,4-oxadiazol-2-yl)-8-phenylquinolin-4-(1H)-one (compound 13) showed reasonable cell-based antiviral activity (EC₅₀ = 50 μM) with no considerable cytotoxicity (CC₅₀ > 100 μM) in the cell viability assay, suggesting that it may be amenable to further development for identifying new anti-HIV-1 agents. Docking studies using the later crystallographic data available for PFV integrase corroborate favorable binding to the active site of HIV integrase, providing a basis for the design of more potent analogues.     

Direct Synthesis of Anatase Films with ~100% (001) Facets and [001] Preferred Orientation

Anatase films exhibiting ~100% (001) reactive facets at the surface were grown hydrothermally on gold substrate from a homogeneous solution of TiF(4) and NaF. In addition to NaF, it was found that TiO(2) films with very similar properties could be prepared with the fluoride salts LiF, CsF, HF, NH(4)F, and N(CH(2)CH(3))(4)F. The polycrystalline anatase films are continuous, approximately 1 μm thick, and evenly coat the substrate. The surface grain size is ~400 nm. Grazing angle XRD measurements show that the films exhibit a high degree of preferred orientation with the c-axis normal to the substrate surface. SEM images reveal that the grains span the thickness of the films. Annealing the films at 500 °C removes fluorine and causes crystallites within the grains to restructure as shown by SEM, XRD, and Raman spectroscopy. Supported anatase films grown from this one-pot method may serve as oxidative photocatalysts and electrodes for photoelectrochemical applications such as solar cells and hydrogen evolution.     

Three-component solvent-free synthesis of 5-substituted-1H-tetrazoles catalyzed by unmodified nanomagnetite with microwave irradiation or conventional heating

Research on Chemical Intermediates - A convenient, rapid, and highly efficient procedure for synthesis of 5-substituted-1H-tetrazoles was developed via multicomponent domino Knoevenagel...