Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Catalytic asymmetric desymmetrization of cyclic meso-1,3- and 1,4-diols by a phosphinite derivative of quinidine

Asymmetric monobenzoylation reactions of cyclic meso-1,3- and 1,4-diols were catalyzed by a phosphinite derivative of quinidine to afford the corresponding monobenzoylated diol with good yield and enantioselectivity. [reaction: see text]     

How constant are Ritchie's "constant selectivity relationships"? A general reactivity scale for n-, pi-, and sigma-nucleophiles

The kinetics of 82 reactions of benzhydrylium ions (Ar(2)CH(+)) with n-nucleophiles has been determined at 20 degrees C. Evaluation by the equation log k = s(N + E) delivered the reactivity parameters N and s for 15 n-nucleophiles (water, hydroxide, amines, etc.). All nucleophiles except water (s = 0.89) and (-)SCH(2)CO(2)(-) (s = 0.43) have closely similar slope parameters (0.52 < s < 0.71), indicating that the reactions of most n-nucleophiles approximately follow Ritchie's constant selectivity relationship (s = constant). The different slope parameter for water is recognized as the main reason for the deviations from the Ritchie relationship reported in 1986. Correlation analysis of the rate constants for the reactions of benzhydrylium ions with the n-nucleophiles (except H(2)O) on the basis of Ritchie's equation log k = N(+) + log k(0) yields a statistically validated set of N(+) parameters for Ritchie-type nucleophiles and log k(0) parameters for benzhydrylium ions. The N and s parameters of the n-nucleophiles derived from their reactions with benzhydrylium ions were combined with literature data for the reactions of these nucleophiles with other carbocations to yield electrophilicity parameters E for tritylium, tropylium, and xanthylium ions. While the E parameters for tropylium and xanthylium ions appear to be generally applicable, it is demonstrated that the E parameters of tritylium ions can be used to predict reactivities toward n-nucleophiles as well as hydride transfer rate constants but not rates for the reactions of tritylium ions with pi-nucleophiles. It is now possible to merge the large data sets determined by Ritchie and others with our kinetic data and present a nucleophilicity scale comprising n- (e.g., amines), pi- (e.g., alkenes and arenes), and sigma-nucleophiles (e.g., hydrides).     

An electrically conductive metallocycle: densely packed molecular hexagons with π-stacked radicals

Electrical conduction among metallocycles has been unexplored because of the difficulty in creating electronic transport pathways. In this work, we present an electrocrystallization strategy for synthesizing an intrinsically electron-conductive metallocycle, [Ni₆(NDI-Hpz)₆(dma)₁₂(NO₃)₆]·5DMA·nH₂O (PMC-hexagon) (NDI-Hpz = N,N′-di(1H-pyrazol-4-yl)-1,4,5,8-naphthalenetetracarboxdiimide). The hexagonal metallocycle units are assembled into a densely packed ABCABC… sequence (like the fcc geometry) to construct one-dimensional (1D) helical π-stacked columns and 1D pore channels, which were maintained under the liberation of H₂O molecules. The NDI cores were partially reduced to form radicals as charge carriers, resulting in a room-temperature conductivity of (1.2–2.1) × 10⁻⁴ S cm⁻¹ (pressed pellet), which is superior to that of most NDI-based conductors including metal–organic frameworks and organic crystals. These findings open up the use of metallocycles as building blocks for fabricating conductive porous molecular materials.

Intrinsically electron-conductive metallocycle was synthesized. π-Radicals play a key role in constructing π-stacked columns among molecular hexagons and achieving high electrical conductivity over 10⁻⁴ S cm⁻¹ in polycrystalline pellet.     

Current-driven resonant excitation of magnetic vortices

A magnetic vortex core in a ferromagnetic circular nanodot has a resonance frequency originating from the confinement of the vortex core. By the micromagnetic simulation including the spin-transfer torque, we show that the vortex core can be resonantly excited by an ac (spin-polarized) current through the dot and that the resonance frequency can be tuned by the dot shape. The resistance measurement under the ac current successfully detects the resonance at the frequency consistent with the simulation.     

High-power 2.8 W blue-violet laser diode for white light sources

High-power 2.8 W blue-violet InGaN LD was fabricated, applying AlN facet coating technology. The AlN was found to be crystallized on the facets and very stable even after 2200 h cw operation. Luminous flux over 380 lm is obtained with a phosphor-converted LD excitation white light source using just a single laser chip at 1A operating current.     

Gas by-products of CF3I under AC partial discharge

This paper presents the decomposition by-products of trifluro-iodo-methane and their relative proportions in the gas phase under the occurrence of partial discharge. The experiment was performed in the presence of water vapor from 250 to 400 ppm under a non-uniform electric field configuration. The experimental results reveal that the by-products of C₂F₆, C₂F₄, C₂F₅I with the amount of 1300, 200, and 55 (CH₃I) ppm, respectively, were produced for a cumulative charge of 161 mC. Other by-products, such as C₃F₈, CHF₃, C₃F₆ CH₃I were obtained at less than 30 ppm C₂F₆ was the dominant gas by-product of trifluro-iodo-methane suffering partial discharge.     

Effect of diamine treatment on the conversion efficiency of PbSe colloidal quantum dot solar cells

Polymer-free photovoltaic devices were fabricated via a solution process using PbSe colloidal quantum dots (QDs) and an organic semiconductor (tetrabenzoporphyrin, BP) that can be prepared in situ from a soluble precursor. The device structure was ITO/PEDOT/BP:QD/QD/Al, where the BP:QD and QD layers correspond to a bulk heterojunction and a buffer layer, respectively. The buffer layer was treated with ethylenediamine (EDA) to crosslink the QDs. As a result, the energy conversion efficiency of the EDA-treated device was superior to that of an untreated device, mainly due to an increase in the short-circuit current density.     

Polymer electrolytes plasticized with hyperbranched polymer for lithium polymer batteries

Hyperbranched polymers (HBPs) with different terminal groups and different ethylene oxide (EO) chain lengths were prepared, and the influence of the HBP structures including molecular weights and molecular weight distribution on the ionic conductivity and the mechanical property of the composite polymer electrolytes composed of poly (ethylene oxide) (PEO), HBP, BaTiO₃ as a ceramic filler, and LiN(CF₃SO₂)₂ as a lithium salt were investigated. It was found that the molecular weights of the HBP do not affect significantly the ionic conductivity, but the molecular weight distribution might affect it, and also further branching at the terminals of the HBP led to a decrease in the ionic conductivity. The HBP with longer EO chain length was effective for enhancement of the ionic conductivity in comparison with the HBP with shorter one. The increase in cross-linkable groups (acryloyl group) at the terminals of the HBP improved the tensile strength, but caused the ionic conductivity to decrease. Loosely cross-linked composite polymer electrolyte showed higher ionic conductivity and higher tensile strength than no cross-linked one. Paper presented at the Patras Conference on Solid State Ionics — Transport Properties, Patras, Greece, Sept. 14 – 18, 2004.