Interfacial adsorption state of protonated lipophilic porphyrins in a liquid-liquid system by using reflection spectrometry.

Analysis by reflection spectrometry was performed to clarify the interfacial adsorption of protonated lipophilic tetraphenylporphyrin derivatives in a dodecane-aqueous sulfuric acid system, and to confirm the utility of partial reflection spectroscopy. Interfacial adsorption was not observed for porphyrins substituted at the 2,6 positions of meso-phenyl groups, suggesting that the substituents prevent porphyrins from forming aggregates by steric hindrance. Polymorphous J-aggregates of acid dications were produced by tetra-p-tolylporphyrin with a saturated interfacial molecular density of 1.0 x 10(-10) mol cm(-2), which could yield 48 degrees as a mean tilting angle of the pyrrole ring plane from the interface normal. Partial-reflection spectrometry can provide sensitive detection and molecular orientation analysis of interfacial adsorbates.     

Synthesis of enantiopure 1,2-diamine attached to cross-linked polystyrene and its application to an insoluble catalyst for asymmetric hydrogenation

A novel enantiopure 1,2-diamine (5) having two phenolic hydroxy groups was attached into chloromethylated polystyrene through benzyl ether linkage, which was used as a chiral ligand of the catalyst in asymmetric hydrogenation of acetophenone.     

Direct observation of adduct formation of alkyl and aromatic iodides with cl atoms using cavity ring-down spectroscopy

The reactions of Cl atoms with RI (R = n-C3H7, n-C4H9, cyclo-C6H11, C6H5, C6F5, and p-CH3C6H4) have been studied using cavity ring-down spectroscopy at a temperature range of 233-313 K and at 100 Torr total pressure of N2 diluent. Visible absorption spectra of the RI-Cl adducts were recorded at 440-520 nm at 263 K. The yields of the adducts were temperature-dependent. There was no discernible reaction of the adducts in the presence of 100 Torr of O2 at 263 K. Theoretical calculations were performed for C4H9I-Cl and C6H5I-Cl for quantitative explanation of the absorption spectra and the strength of the I-Cl bonds in the charge-transfer complexes. Evidence for the adduct formation following the reaction of Cl with C6H5Br was sought but not found at 440 and 520 nm.     

Effect of solvent on the cation-sensitive fluorescence of polyanions bearing 4′-acryloylbenzo-18-crown-6 Units

Changes in the fluorescence intensity of polyanions bearing 4-acryloylbenzo-18-crown-6 units on the addition of cations were studied in a mixed solvent of methanol and water at 30°C. The sensitivity of the change in fluorescence intensities of the polymers toward cations was strongly enhanced compared to that of the corresponding model compound. When alkali metal cations were added, the fluorescence intensity of the polymers decreased in the orders Li⁺>Na⁺>Cs⁺>Rb⁺>K⁺ in a methanol-water (19) mixture and Li⁺>Na⁺>Rb⁺>K⁺Cs⁺ in a methanol-water (91) mixture. Alkaline earth metal cations and alkylamine hydrochlorides decreased the fluorescence intensity of the polymers in a methanol-water (19) mixture. The cation-dependent decrease in the fluorescence intensity of the polymers was affected by the water fraction in a mixed solvent of methanol and water.     

Performance improvement of a high-temperature superconducting coil by separating and grading the coil edge

In this paper, we establish a model to analyze the transport current performance of a high-temperature superconducting (HTS) coil, considering the dependencies of critical current and n-value of an HTS tape on magnetic field and magnetic field angles. This analysis shows that relatively large electric fields appear at the coil’s edges, preventing improvement in the transport current performance of the coil. To solve this problem, in this paper, we propose a graded coil in which several coil edges of different heights are separated and graded. Analysis of its performance shows that the coil’s critical current increases, thus confirming that there exists an optimum coil cross section at which the stored energy and central magnetic field improve 2.1 times and 45%, respectively, compared with a typical rectangular coil that employs the same total length of the HTS tape. It is recommended that these results of the coil should be applied to SMES.     

Tissue velocity imaging of coronary artery by rotating-type intravascular ultrasound

Intravascular ultrasound (IVUS) provides not only the dimensions of coronary artery but the information of tissue components. In catheterization laboratory, soft and hard plaques are classified by visual inspection of echo intensity. So-called soft plaque contains lipid core or thrombus and it is believed to be more vulnerable than a hard plaque. However, it is not simple to analyze the echo signals quantitatively. When we look at a reflection signal, the intensity is affected by the distance of the object, the medium between transducer and objects and the fluctuation caused by rotation of IVUS probe. The time of flight is also affected by the sound speed of the medium and Doppler shift caused by tissue motion but usually those can be neglected. Thus, the analysis of RF signal in time domain can be more quantitative than intensity of RF signal. In the present study, a novel imaging technique called "intravascular tissue velocity imaging" was developed for searching a vulnerable plaque. Radio-frequency (RF) signal from a clinically used IVUS apparatus was digitized at 500 MSa/s and stored in a workstation. First, non-uniform rotation was corrected by maximizing the correlation coefficient of circumferential RF signal distribution in two consecutive frames. Then, the correlation and displacement were calculated by analyzing the radial difference of RF signal. Tissue velocity was determined by the displacement and the frame rate. The correlation image of normal and atherosclerotic coronary arteries clearly showed the internal and external borders of arterial wall. Soft plaque with low echo area in the intima showed high velocity while the calcified lesion showed the very low tissue velocity. This technique provides important information on tissue character of coronary artery.     

Multiwavelength distributed-feedback dye laser array and its application to spectroscopy

A multiwavelength, multistripe tunable laser array is proposed, and its application to absorption spectroscopy is demonstrated. Laser waveguides doped with Rhodamine 6 G dye were integrated on a plastic chip, and simultaneous output at different wavelengths was obtained by use of a distributed-feedback technique. A very low threshold of 3 muJ was attained, and spectrally narrowed output (<0.1 nm) was obtained. A scheme for digital spectroscopy is also proposed based on this laser array, and absorption spectroscopy of sodium atoms without wavelength scanning is demonstrated by use of a sodium-vapor cell.     

Time-domain sweeplets for acoustic measurements

This paper proposes new types of time-domain generated sine sweeps for impulse response measurements. A general time-domain analytical formulation method, combined with numeric phase alignment and frequency-domain inverse filtering is presented. It is applied to derive three new families of controllable spectrum sine sweeps called sweeplets, capable of matching 1/f^β background noises, producing finite band defocusing and single frequency focusing shapes. Mathematical properties concentrating on practical control of the signal shapes are examined. Effects of various perturbations, such as stationary and transient background noise, harmonic distortion and finite length are presented. Applicability of the proposed method is experimentally verified by a room acoustic measurement example.     

Mechanical fabrication of metal nano-contacts showing conductance quantization under electrochemical potential control

We have mechanically fabricated Ni and Cu nano-constrictions in solution to study their quantized conductance behavior under electrochemical potential control. Conductance quantization was observed at both metals in solution at room temperature for the first time. The conductance of Cu nano-constriction was quantized in units of G₀(=2e²/h). A sharp 1G₀ peak was observed in the conductance histogram. For Ni, a rather broad peak at 1–1.5G₀ was observed in the histogram. The conductance quantization behavior was discussed by comparing previously documented results of nano-constrictions fabricated in air or ultra-high vacuum conditions, with those fabricated in solution.