Rapid Suzuki‐Miyaura cross‐coupling reaction catalyzed by zirconium carboxyphosphonate supported mixed valent Pd(0)/Pd(II) catalyst

Mixed valent Pd(0)/Pd(II) nano‐sized aggregates supported onto a chemically robust layered zirconium carboxyphosphonate framework is prepared and its catalytic activity in Suzuki‐Miyaura cross coupling reaction is explored. The exceptionally high catalytic efficacy of the heterogeneous catalyst in Suzuki‐Miyaura cross coupling reaction is signified by remarkably short reaction time 2 minutes and high turnover frequency of 1.3 x 10⁴ hr^?1. The catalyst can be recycled several times without significant loss of catalytic efficacy, while spectroscopic, structural and microscopic investigations suggest the integrity of the catalyst even after fifth catalytic cycle. The unique ability of the zirconium carboxyphosphonate framework to interact strongly with palladium in dual Pd(0)/Pd(II) oxidation states has been attributed to this remarkable augmentation of catalytic efficacy.     

Effect of polymer and ion concentration on mechanical and drug release behavior of gellan hydrogels using factorial design

Developing optimized hydrogel products requires an in-depth understanding of the mechanisms that drive hydrogel tunability. Here, we performed a full 4 × 4 factorial design study investigating the impact of gellan, a naturally derived polysaccharide (1%, 2%, 3%, or 4% w/v) and CaCl₂ concentration (1, 3, 7, or 10 mM) on the viscoelastic, swelling, and drug release behavior of gellan hydrogels containing a model drug, vancomycin. These concentrations were chosen to specifically provide insight into gellan hydrogel behavior for formulations utilizing polymer and salt concentrations expanding beyond those commonly reported by previous studies exploring gellan. With increasing gellan and CaCl₂ concentration, the hydrogel storage moduli (0.1–100 kPa) followed a power-law relationship and on average these hydrogels had higher liquid absorption capability and greater total drug release over 6 days. We suggest that the effects of gellan and CaCl₂ concentration and their interactions on hydrogel properties can be explained by various phenomena that lead to increased swelling and increased resistance to network expansion.     

Effect of the Solvent Polarity on the Optical Properties in the (OC)5Cr=(OEt)(Ph) Complex: A Quantum Chemical Study

Russian Journal of Physical Chemistry A - In this study, using the B3LYP* method, quantum chemical computations were applied for analyzing the effects of solvent on the electronic spectrum features...     

Synthesis and Characterization of Some Heteroaromatic Derivatives of 3‐But‐2‐enoyl‐chromen‐2‐one and Their Potential as Anti‐inflammatory Agents

A novel series of chromen‐2‐ones containing pyrazole, isoxazole, oxazine, and thiazine substitutions have been synthesized by reacting 3‐[3‐(4‐chloro‐phenyl)‐acryloyl]‐chromen‐2‐one and 3‐[3‐(3‐methoxy‐phenyl)‐acryloyl]‐chromen‐2‐one with various cyclizing agents such as hydrazine, phenylhydrazine, urea, and thiourea. The structures of all the synthesized compounds were confirmed by the use of IR, ¹H‐NMR, mass spectroscopy, and elemental analysis data. All the newly synthesized compounds were evaluated for their anti‐inflammatory activity at a dose of 100 mg/kg body weight in carrageenan‐induced rat paw edema model. The entire series of the compounds exhibited moderate to good anti‐inflammatory activity, with the percentage inhibition of edema formation ranging from 39.99 to 63.15 against the reference drug ibuprofen (100 mg/kg) that showed 78.96% inhibition at the third hour. Compounds 3a , 3c , and 3d showed good inhibitory activity, whereas compounds 3b , 3e , 3f , and 3j showed moderate inhibitory activity at the third hour.     

Enhanced dielectric and electro-optical properties of a newly synthesised ferroelectric liquid crystal material by doping gold nanoparticle-decorated multiwalled carbon nanotubes

In this article, a newly synthesised ferroelectric liquid crystal (FLC) material, namely LAHS 22, has been characterised. The characterisation of the FLC material has been performed using dielectric relaxation spectroscopy, differential scanning calorimetry and polarisation optical microscopy. We observed an enhancement in the dielectric and electro-optical properties of the FLC material by incorporating gold nanoparticles (GNPs)-decorated multiwalled carbon nanotubes (MWCNTs). The GNPs-decorated MWCNTs cause an increment in dielectric dispersion (up to kHz), absorption, spontaneous polarisation and rotational viscosity of the FLC material. The pure and GNPs-decorated MWCNTs doped FLC cells were analysed by means of various dielectric spectroscopic and optical measurements. The observed enhancement in the dielectric and electro-optical properties of the FLC material has also been studied with concentration of GNPs-decorated MWCNTs in FLC material. The GNPs-decorated MWCNTs/FLC composites are not only of fundamental importance, but also useful materials for device applications such as liquid crystal displays and memory devices.     

Sol–gel synthesis and optical behavior of Mg–Ce–O nano-crystallites

The Mg–Ce–O powder are shown to contain periclase-type MgO and/or fluoride-type cerium oxide (CeO₂) depending upon the composition (x) defined by Ce/(Ce + Mg) atomic ratio. Lattice contraction of pariclase phase of MgO (average crystallite size ~8.8 nm) at Ce content of ‘x’ = 0.20 in comparison to pure MgO (crystallite size ~9.5 nm) has been realized due to oxygen vacancy formation. The optical band gap values of CeO₂ varies (3.0–3.2 eV) due to oxygen vacancy formation in CeO₂ phase, crystallite size and/or Ce³⁺/Ce⁴⁺ ratio. Further, the addition of Ce has shown to reduce the physisorption and chemisorption of water significantly as reflected by (1) suppression of related absorption peaks and (2) absence of magnesium hydroxide, Mg(OH)₂, bands in Fourier transform infrared spectra.     

Synthesis and Antimicrobial Activity of Some Novel 7-Chloro-4-aminoquinoline Derivatives

Russian Journal of General Chemistry - A number of novel 7-chloro-4-aminoquinoline derivatives have been efficiently synthesized by nucleophilic aromatic substitution reaction of...     

Kinetics of thermal decomposition of a synthetic K–H3O jarosite analog

The thermal decomposition kinetics of a synthetic K–H₃O jarosite analog was determined from thermogravimetric analysis at various heating rates in air. A thermal decomposition mechanism was proposed based on X-ray analysis of partially decomposed material and distinct features observed during thermal decomposition analysis. The decomposition path is complex. The material was treated as a composite of K-jarosite, H₃O-jarosite, and a “vacancy component”. The evolution of (OH)^? and SO₃ from these individual components was modeled. The decomposition is broken into subreactions according to distinct features in the thermoanalytical measurements. The subreactions are arranged sequentially and in parallel according to the evolution of the participating phases. A set of associated apparent activation energies was determined using isoconversion analysis. Kinetic triplets were assigned to each subreaction. A reasonable match with the observed decomposition was achieved by varying pre-exponential factors.     

Evaluation of K–H3O jarosite as thermal witness material

The scope of this work was the assessment of thermo-oxidative deterioration, hydrothermal stability, and crystalline zone deterioration of some bookbinding leathers from some religious books published in XVIII century stored in Romanian libraries. In this purpose, the following thermal analysis methods were employed: thermogravimetry/derivative thermogravimetry (TG/DTG), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The thermo-oxidative damage of investigated leathers was characterized by the rate of the first thermo-oxidation process put in evidence in TG/DTG curves recorded in static air atmosphere. The hydrothermal stability was characterized by shrinkage temperature determined by DSC analysis of leathers in water excess. The damage of the crystalline zone of leathers was determined by DSC in nitrogen flow and DMA analyses. The qualitative damage for each leather and each kind of degradation was evaluated using the criteria resulted by thermal analysis of a large number of collagen-based materials (pure collagens, new and old parchments and leathers). The obtained results could be used for finding the best possible methods for preservation and/or restoration of the investigated bookbinding leathers.