Fabrication and characterization of high-temperature microreactors with thin film heater and sensor patterns in silicon nitride tubes

In this paper the fabrication and electrical characterization of a silicon microreactor for high-temperature catalytic gas phase reactions, like Rh-catalyzed catalytic partial oxidation of methane into synthesis gas, is presented. The microreactor, realized with micromachining technologies, contains silicon nitride tubes that are suspended in a flow channel. These tubes contain metal thin films that heat the gas mixture in the channel and sense its temperature. The metal patterns are defined by using the channel geometry as a shadow mask. Furthermore, a new method to obtain Pt thin films with good adhesive properties, also at elevated temperatures, without adhesion metal is implemented in the fabrication process. Based on different experiments, it is concluded that the electrical behaviour at high temperatures of Pt thin films without adhesion layer is better than that of Pt/Ta films. Furthermore, it is found that the temperature coefficient of resistance (TCR) and the resistivity of the thin films are stable for up to tens of hours when the temperature-range during operation of the microreactor is below the so-called "burn-in" temperature. Experiments showed that the presented suspended-tube microreactors with heaters and temperature sensors of Pt thin films can be operated safely and in a stable way at temperatures up to 700 degrees C for over 20 h. This type of microreactor solves the electrical breakdown problem that was previously reported by us in flat-membrane microreactors that were operated at temperatures above 600 degrees C.     

Uses and analyses of curtin-hammett/winstein-holness systems involving second order reactions

The Curtin-Hammett (C-H) principle and the Winstein-Holness (W-H) equation approximate the product ratio and overall rate constant of reaction for systems involving a starting material which exists in two forms, each of which reacts via first-order kinetics to give a different product. The C-H/W-H approximations are valid when the rates of isomer interconversion are significantly faster than the rates of product formation. The present treatment encompasses non-first-order reactions to product. A numerical predictor-corrector technique is used to show (1) that relative reagent concentration can affect both the product ratio and the observed rates of product formation; (2) that the absolute concentration of reagent and substrate can affect the kinetics; and (3) that factors (1) and (2) above can affect the validity of the C-H/W-H approximations for non-first-order C-H/W-H schemes.     

Creation and comparison of MS/MS spectral libraries using quadrupole ion trap and triple-quadrupole mass spectrometers

Searchable libraries of MS/MS spectra, obtained using liquid chromatography/tandem mass spectrometry (LC/MS/MS) with data-dependent scan mode switching on both quadrupole ion trap and triple-quadrupole mass spectrometers in conjunction with electrospray ionization, are presented. The effects on library search scores of changing the parameters for producing collision-induced dissociation (CID) on both instrument types are systematically evaluated. These observations serve as a basis for determining a universal set of conditions for building MS/MS libraries. A group of 19 closely related steroids was used. The ability to obtain library-searchable spectra at low concentrations is demonstrated for the analysis of a sample of progesterone spiked with hydroxyprogesterone impurities at 0.1 and 0.01%.     

Magnetic polariton,impurity mode enhancement,and superradiance effects in FeF2

The first clear evidence for the existence of $\text{magnetic polaritons}$ from a high resolution, far-infrared (FIR) study of the antiferromagnetic resonance (AFMR) of FeF₂ is presented. The broad (4 kOe) asymmetric structure observed in transmission is shown to be a characteristic polariton effect; the linewidth ΔH at 4.2 K is only 350 Oe. The Mn impurity mode is enhanced by ～50 in agreement with a coupled equations of motion prediction. Both host and impurity resonances are broadened by superradiance.     

Two-atom model for the calculation of surface blocking in medium and high energy ion scattering

A two-atom blocking model has been developed to analyze surface blocking patterns recently obtained in medium energy ion scattering experiments. In the model the mean square thermal vibration amplitude of a surface atom can be used as a fitting parameter in comparison with experimental results. Anisotropic surface vibrations have been taken into account by assuming a non-spherical Gaussian probability distribution for the thermal displacement of the surface atom. In addition, some analytical expressions have been derived for the effective nuber of target atoms contributing to the yield of ions backscattered into a blocking direction.     

Generation of ultraviolet broadband light in a single-mode fiber

Ultraviolet broadband light spanning 337–405 nm was produced in a single-mode optical fiber primarily by stimulated Raman scattering. Pulses of 4 ns duration at 337 nm were coupled into a 50 m long ultraviolet-grade fiber featuring single-mode operation in the 320–450 nm range. Significant spectral broadening was achieved with pulses of only ∼10 W peak power. Our experiments demonstrate the potential for a source with ∼10⁴ times the spectral radiance of a quartz tungsten halogen lamp, which is currently used for many applications in this wavelength range. PACS 42.65.Ky; 42.81.Wg     

Fast path and polarization manipulation of telecom wavelength single photons in lithium niobate waveguide devices

We demonstrate fast polarization and path control of photons at 1550?nm in lithium niobate waveguide devices using the electro-optic effect. We show heralded single photon state engineering, quantum interference, fast state preparation of two entangled photons, and feedback control of quantum interference. These results point the way to a single platform that will enable the integration of nonlinear single photon sources and fast reconfigurable circuits for future photonic quantum information science and technology.     

Muscle spindles are concentrated in the superior vocalis subcompartment of the human thyroarytenoid muscle

It is hypothesized that different parts of the thyroarytenoid muscle (TA) are functionally specialized. Specifically, the TA is divided into a lateral muscularis compartment and a medial vocalis compartment. This study examined the distribution of muscle spindles throughout the human TA as an indicator of these functional differences. Histological cross-sections from the anterior, middle, and posterior regions of five human membranous vocal folds were examined for the number and location of muscle spindles. There was an average of 6.1 muscle spindles in sections from each region with no significant variation between the different regions (p < .05). However, in sections from all three regions, the muscle spindles were always found to be concentrated in the superior medial quadrant of the TA (mean 85.9%, p < .01). The inferior medial, superior lateral, and inferior lateral quadrants of the TA contained 11.96%, 2.17%, and 0%, respectively, of the total muscle spindles. Within the superior medial quadrant, most of the muscle spindles were localized in the most superficial part of the muscle.The results of this study demonstrate that the majority of TA muscle spindlesare concentrated in its superior medial quadrant, an area we have termed the superior vocalis subcompartment (SC. This finding suggests that the superior vocalis SC is functionally distinct from the remainder of the TA. It is hypothesized that tension in the superior vocalis SC can be controlled independently from the remainder of the TA, and this capability is used to effect the biomechanics of vocal fold vibration during phonation.