Synthesis and spectral studies on Ni(II) complexes involving N-furfuryl-N-substituted benzyldithiocarbamates and PPh3: Anagostic and C–H…π(chelate) interactions in (N-furfuryl-N-(4-fluorobenzyl)dithiocarbamato-S,S′)(thiocyanato-N)(triphenylphosphine)nickel(II)

Twelve new nickel(II) complexes of functionalized dithiocarabamates [Ni(S₂CNRR')₂](1-6) and [Ni(S₂CNRR')(NCS)(PPh₃)](7-12) [where R=furfuryl; R'=2-hydroxy benzyl (1,7), 3-hydroxy benzyl (2,8), 4-hydroxy benzyl (3,9), 4-methoxy benzyl (4,10), 4-fluoro benzyl (5,11), 4-chloro benzyl (6,12)] have been prepared and characterized by elemental analysis, IR, UV-Vis and NMR (¹H and ¹³C) spectroscopy. IR spectra of the complexes support the bidentate coordination of dithiocarbamate ligands. Electronic spectral studies on complexes 1-12 indicate square planar geometry around the nickel(II) central atom. In the ¹³C NMR spectra, the upfield shift of NCS₂ carbon signal for heteroleptic complex (7-12) compared to homoleptic complexes (1-6) is due to the effect of PPh₃ on the mesomeric drift of electron density toward nickel through thioureide C-N bond. Single crystal X-ray structural analysis of complex 11 confirms that the coordination geometry about the Ni(II) is distorted square planar. A rare intramolecular anagostic interaction C–H^…Ni [Ni???H=2.804 Å] is observed. The packing of complex 11 is stabilized by non-conventional C–H^…S, C–H?F and C–H?π(chelate, NiS₂C) bonding interactions.     

Stereoselective iodocyclization of 3-acylamino-2-methylene alkanoates: synthesis of analogues of N-benzoyl-syn-phenylisoserine

[reaction: see text] A convenient approach to racemic analogues of N-benzoyl-syn-phenylisoserine was realized via the stereoselective iodocyclization of amides obtained from Baylis-Hillman adducts.     

Synthesis and Characterization of Homoleptic and Heteroleptic Complexes Involving Dithiocarbamates,Triphenylphosphine, and Nickel(II)

Abstract

Six new nickel complexes of two dithiocarbamate ligands (cyfdtc = N-cyclohexyl-N- furfuryldithiocarbamate and bztpedtc = N-benzyl-N-[2-thiophenylethyl]dithiocarbamate) namely, (Ni[cyfdtc]₂) (1), (Ni[bztpedtc]₂) (2), (Ni[cyfdtc][NCS][PPh₃]) (3), (Ni[bztpedtc] [NCS][PPh₃]) (4), (Ni[cyfdtc][PPh₃]₂)ClO₄ (5), and (Ni[bztpedtc][PPh₃]₂)ClO₄ (6) have been prepared and characterized using IR, electronic, and NMR (¹H and ¹³C) spectra. A single crystal X-ray structural analysis was carried out for complex 3 and showed that nickel is in a distorted square planar arrangement with the NiS₂PN chromophore. The shift in ν_C?N of the heteroleptic complexes to higher frequencies compared with the parent complex is assigned to mesomeric delocalization of electron density from the

dithiocarbamate ligand toward the metal atom, which increases the contribution of polar thioureide form in mixed ligand complexes. Electronic spectral studies suggest square planar geometry for the complexes. In the ¹³C NMR spectra, the upfield shift of NCS₂ carbon signal for 3 and 4 from the chemical shift value of 1 and 2 is due to effect of PPh₃ on the mesomeric drift of electron density toward nickel throughout thioureide C?N bond.     

A novel conformationally restricted analogue of 3-methylaspartic acid via stereoselective methylation of chiral pyrrolidin-2-ones

Conformationally restricted analogues of β-methylaspartic acid were easily prepared starting from chiral N-protected trans-3-amino-4-methoxycarbonyl pyrrolidin-2-ones. The key step of the synthesis was the methylation reaction at C-4, proceeding with high diastereoselection syn to the protected amino group lying at C-3 of the pyrrolidin-2-one ring.     

Issues of ligand accessibility and mobility in initial cell attachment

The influence of lateral ligand mobility on cell attachment and receptor clustering has previously been explored for membrane-anchored molecules involved in cell-cell adhesion. In this study, we considered instead a cell binding motif from the extracellular matrix. Even though the lateral mobility of extracellular matrix ligands in membranes does not occur in vivo, we believe it is of interest for cell engineering in vitro. As is the case for cell-cell adhesion molecules, lateral mobility of extracellular matrix ligands could influence cell attachment and, subsequently, cell behavior in cell culture. In this paper, the accessibility and functionality of extracellular matrix ligands presented at surfaces were evaluated for the conditions of laterally mobile versus non-mobile ligands by studying ligand-antibody binding events and early cell attachment as a function of ligand concentration. We compare the initial attachment of rat-derived adult hippocampal progenitor (AHP) cells on laterally mobile, supported phospholipid bilayer membranes to non-mobile, poly-L-lysine-grafted-poly(ethylene glycol) (PLL-g-PEG) polymer films functionalized with a range of laminin-derived IKVAV-containing peptide densities. To this end, synthesis of a new PLL-g-PEG/PEG-IKVAV polymer is described. The characterization of available IKVAV peptides on both surface presentations schemes was explored by studying the mass uptake of anti-IKVAV antibodies using a combination of the surface-sensitive techniques quartz crystal microbalance with dissipation monitoring, surface plasmon resonance spectroscopy, and optical waveguide lightmode spectroscopy. IKVAV-containing peptides presented on laterally mobile, supported phospholipid bilayers and non-mobile PLL-g-PEG were recognized by the anti-IKVAV antibody in a dose-dependent manner, indicating that the amount of available IKVAV ligands increases proportionally with ligand density over the concentrations tested. Attachment of AHP cells to IKVAV-functionalized PLL-g-PEG and supported phospholipid bilayers followed a sigmoidal dependence on peptide concentration, with a critical concentration of approximately 3 pmol/cm2 IKVAV ligands required to support initial AHP cell attachment for both surface modifications. There appeared to be little influence of IKVAV peptide mobility on the initial attachment of AHP cells. Although the spread in the cell attachment data was larger for the PLL-g-PEG surface modification, this was reduced when observed after 24 h, indicating that the cells might need longer times to establish attachment strengths equivalent to those observed on peptide-functionalized supported lipid bilayers. The present study is a step toward understanding the influence of extracellular-matrix-derived ligand mobility on cell fate. Further analysis should focus on the systematic tuning of lateral ligand diffusion, as well as a comparison between the response of non-spreading cells (i.e., AHPs), versus spreading cells (i.e., fibroblasts).     

Influence of alkyl chain length on phosphate self-assembled monolayers

A series of alkyl phosphates with alkyl chain lengths ranging from C10 to C18 have been synthesized. Self-assembled monolayers (SAMs) of these molecules were prepared on titanium oxide surfaces by immersion of the substrates in alkyl phosphate solutions of 0.5 mM concentration in n-heptane/isopropanol. The SAMs were characterized by means of dynamic water contact angle (dCA) measurements, variable-angle spectroscopic ellipsometry (VASE), X-ray photoelectron spectroscopy (XPS), and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS). A higher degree of order and packing density within the monolayers was found for alkyl phosphates with alkyl chain lengths exceeding 15 carbon atoms. This is reflected in a lower dCA hysteresis, as well as a film thickness measured by VASE and XPS close to the expected values for SAMs with an average alkyl chain tilt angle of 30 degrees to the surface normal. Additionally a shift of the symmetric and antisymmetric C-H stretching modes in the PM-IRRAS spectra to lower wave numbers was observed. These findings imply a higher two-dimensional crystallinity of the films derived from alkyl phosphates with a longer alkyl chain length.     

Fractional powers of the noncommutative Fourier's law by the S‐spectrum approach

Let e_?, for ? = 1,2,3, be orthogonal unit vectors in and let be a bounded open set with smooth boundary ?Ω. Denoting by a point in Ω, the heat equation, for nonhomogeneous materials, is obtained replacing the Fourier law, given by the following: into the conservation of energy law, here a, b, are given functions. With the S‐spectrum approach to fractional diffusion processes we determine, in a suitable way, the fractional powers of T. Then, roughly speaking, we replace the fractional powers of T into the conservation of energy law to obtain the fractional evolution equation. This method is important for nonhomogeneous materials where the Fourier law is not simply the negative gradient. In this paper, we determine under which conditions on the coefficients a, b, the fractional powers of T exist in the sense of the S‐spectrum approach. More in general, this theory allows to compute the fractional powers of vector operators that arise in different fields of science and technology. This paper is devoted to researchers working in fractional diffusion and fractional evolution problems, partial differential equations, and noncommutative operator theory.     

Generating examples: focus on processes

Constructing an example can be a rich and complex activity, interesting to investigate mathematical thinking and with many potentialities in mathematics education. In this article, I analyse processes involved in example generation, with particular emphasis on production and transformation of signs representing mathematical objects and on generation of inferences. The richness and complexity of these processes will also be shown through the notions of prototypes, concept image and concept definition. This investigation reveals aspects that are significant both in education and for the reflection on cognitive and cultural aspects of mathematical thinking.     

Rapid Classification and Recognition Method of the Species and Chemotypes of Essential Oils by ATR-FTIR Spectroscopy Coupled with Chemometrics

In the present work, the applicability of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, coupled with chemometric tools in recognizing essential oils (EOs) for routine control, was evaluated. EOs belonging to Mentha, Cymbopogon, and Lavandula families and to S. rosmarinus and T. vulgaris species were analyzed, and the performance of several untargeted approaches, based on the synergistic combination of ATR-FTIR and Partial Least Squares Discriminant Analysis (PLS-DA), was tested to classify the species and chemotypes. Different spectra pre-processing methods were employed, and the robustness of the built models was tested by means of a Receiver Operating Characteristic (ROC) curve and random permutations test. The application of these approaches revealed fruitful results in terms of sensitivity and specificity, highlighting the potentiality of ATR-FTIR and chemometrics techniques to be used as a sensitive, cost-effective, and rapid tool to differentiate EO samples according to their species and chemotype.