Spectral pattern recognition of improved voice quality

The self-organizing map (a neural network) was applied to the spectral pattern recognition of voice quality in 34 subjects: 15 patients operated on because of insufficient glottal closure and 19 subjects not treated for voice disorders. The voice samples, segments of sustained /a/, were perceptually rated by six experts. A self-organized acoustic feature map was first computed from tokens of /a/ and then used for the analysis of the samples. The locations of the samples on the map were determined and the distances from a normal reference were compared with the perceptual ratings. The map locations corresponded to the degree of audible disorder: the samples judged as normal were overlapping or close to the normal reference, whereas the samples judged as dysphonie were located further away from it. The comparison of pre- and postoperative samples of the patients showed that the perceived improvement of voice quality was also detected by the map.     

N,N‐dimethylaminopyridine as initiator in the copolymerization of diglycidylether of bisphenol A with six‐membered cyclic carbonates

N,N‐Dimethylaminopyridine (DMAP) was used as initiator to cure mixtures of diglycidylether of bisphenol A (DGEBA) and 1,3‐dioxan‐2‐one (TMC) or 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DMTMC). The curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the groups involved in the curing. We observed the formation of five‐membered cyclic carbonates and anionic carbonate groups that remain unreacted at the chain ends. The formation of these groups was explained by the attack of the anionic propagation species on the methylene carbon of the carbonate group, which leads to an alkyl‐oxygen rupture. By performing the cure in the thermobalance we could evaluate the loss of CO₂ produced in the samples containing carbonates. The kinetics were studied by DSC and analyzed with isoconversional procedures. The addition of carbonates slows down the curing rate. Thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA) experiments were used to evaluate the properties of the materials obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2873–2882, 2006     

Near infrared reflectance spectroscopy for the fast identification of PVC-based films

Near infrared (NIR) reflectance spectroscopy was used to develop a non-destructive and rapid qualitative method for the analysis of plastic films used by the pharmaceutical industry for blistering. Three types of films were investigated: 250 microm PVC [poly(vinyl chloride)] films, 250 microm PVC films coated with 40 g m(-2) of PVDC [poly(vinylidene dichloride)] and 250 microm PVC films coated with 5 g m(-2) of TE (Thermoelast) and 90 g m(-2) of PVDC. Three analyses were carried out using different pre-treatment options and a PLS (partial least squares) algorithm. Each analysis was aimed at identifying one type of film and rejecting all types of false sample (different thickness, colour or layer). True and false samples from four plastics manufacturers were included in the calibration sets in order to obtain robust methods that were suitable regardless of the supplier. Specificity was demonstrated by testing validation sets against the methods. The tests showed 0% of type I (false negative identification) and 1% of type II errors (false positive identification) for the PVC method, 13 and 3%, respectively, for the PVC-PVDC method and no error for the PVC-TE-PVDC method. Type II errors, mostly due to the slight sensitivity of the methods to film thickness, are easily corrected by simple thickness measurements. This study demonstrates that NIR spectroscopy is an excellent tool for the identification of PVC-based films. The three methods can be used by the pharmaceutical industry or plastics manufacturers for the quality control of films used in blister packaging.     

Isothermal kinetics of photopolymerization and thermal polymerization of bis-GMA/TEGDMA resins

The purpose of this work is to analyse certain kinetic features related to thermoinduced and photoinduced isothermal curing in the 25/75 mass% bis-GMA/TEGDMA system. The kinetic parameters associated with photo and thermal curing were determined and compared using an isoconversional procedure and the kinetic model was obtained by means of a reduced master plot. In photocuring, the kinetic results obtained by means of this phenomenological methodology were compared with those obtained on the basis of mechanistic considerations. In this case, we estimated the propagation and termination constants associated with photocuring at different conversions. When the phenomenological procedure is performed, the rate constant decreases slightly during the curing process and the autoacceleration effect of the process is demonstrated in the kinetic model, which is autocatalytic. However, in the mechanistic model, this same effect is noted through an increase in the rate constants, while it is assumed that the kinetic model is in the order of n with n=1.     

An Improved HPLC Post-Column Methodology for the Identification of Free Radical Scavenging Phytochemicals in Complex Mixtures

The importance of natural antioxidants principally relates to their health-promoting properties. The discovery of new sources of established compounds or more potent compounds is a costly exercise and any technique capable of aiding this procedure would be highly significant. An approach combining chromatographic separation, component analysis and post-column identification of free radical scavenging has been reported. However, its effectiveness is dependent upon various factors and the number of samples analyzed without operator intervention is restricted. A more applicable technique using a 10% to 100% methanol with 2% acetic acid mobile phase and a citric acid-sodium citrate buffered methanolic 1,1-diphenyl-2-picrylhydrazyl free radical reagent is presented, whereby free radical scavengers can be detected within crude extracts of variable polarity without special considerations. As an illustration, acetone, 70% (aq.) methanol and acetonitrile-soluble extracts were prepared from sage (Salvia officinalis L.) for extraction of polar and non-polar radical scavengers and analyzed. Radical scavenging components were identified as carnosic, caffeic and rosmarinic acids and luteolin-7-O-glycoside. Others radical scavengers were tentatively identified as benzoic and hydroxycinnamic acid derivatives, flavonoids and diterpenoids. Through the application of this technique, carnosic acid and rosmarinic acid were identified as the principal free radical scavengers.     

A One‐Pot Synthesis of N‐Aryl‐2‐Oxazolidinones and Cyclic Urethanes by the Lewis Base Catalyzed Fixation of Carbon Dioxide into Anilines and Bromoalkanes

The multicomponent assembly of pharmaceutically relevant N‐aryl‐oxazolidinones through the direct insertion of carbon dioxide into readily available anilines and dibromoalkanes is described. The addition of catalytic amounts of an organosuperbase such as Barton's base enables this transformation to proceed with high yields and exquisite substrate functional‐group tolerance under ambient CO₂ pressure and mild temperature. This report also provides the first proof‐of‐principle for the single‐operation synthesis of elusive seven‐membered ring cyclic urethanes.     

A Frobenius Theorem for Locally Convex Global Analysis

 We prove a Frobenius theorem for Banach space complemented subbundles of the tangent bundle of a manifold modelled on locally convex spaces. The proof is based on an implicit function theorem for maps from locally convex spaces to Banach spaces proved in a recent paper of the author.     

Measurements of water vapor isotope ratios with wavelength-scanned cavity ring-down spectroscopy technology: new insights and important caveats for deuterium excess measurements in tropical areas in comparison with isotope-ratio mass spectrometry

The new infrared laser spectroscopic techniques enable us to measure the isotopic composition (δ(18)O and δ(2)H) of atmospheric water vapor. With the objective of monitoring the isotopic composition of tropical water vapor (West Africa, South America), and to discuss deuterium excess variability (d=δ(2)H - 8δ(18)O) with an accuracy similar to measurements arising from isotope-ratio mass spectrometry (IRMS), we have conducted a number of tests and calibrations using a wavelength-scanned cavity ring-down spectroscopy (WS-CRDS) technique. We focus in this paper on four main aspects regarding (1) the tubing material, (2) the humidity calibration of the instrument, (3) the water vapor concentration effects on δ, and (4) the isotopic calibration of the instrument. First, we show that Synflex tubing strongly affects δ(2)H measurements and thus leads to unusable d values. Second, we show that the mixing ratio as measured by WS-CRDS has to be calibrated versus atmospheric mixing ratio measurements and we also suggest possible non-linear effects over the whole mixing ratio range (~2 to 20 g/kg). Third, we show that significant non-linear effects are induced by water vapor concentration variations on δ measurements, especially for mixing ratios lower than ~5 g/kg. This effect induces a 5 to 10‰ error in deuterium excess and is instrument-dependent. Finally, we show that an isotopic calibration (comparison between measured and true values of isotopic water standards) is needed to avoid errors on deuterium excess that can attain ~10‰.     

Single‐Molecule Redox‐Targeting Reactions for a pH‐Neutral Aqueous Organic Redox Flow Battery

Aqueous organic redox flow batteries (AORFBs) have received considerable attention for large‐scale energy storage. Quinone derivatives, such as 9,10‐anthraquinone‐2,7‐disulphonic acid (2,7‐AQDS), have been explored intensively owing to potentially low cost and swift reaction kinetics. However, the low solubility in pH‐neutral electrolytes restricts their application to corrosive acidic or caustic systems. Herein, the single molecule redox‐targeting reactions of 2,7‐AQDS anolyte are presented to circumvent its solubility limit in pH‐neutral electrolytes. Polyimide was employed as a low‐cost high‐capacity solid material to boost the capacity of 2,7‐AQDS electrolyte to 97 Ah L^?1. Through in situ FTIR spectroscopy, a hydrogen‐bonding mediated reaction mechanism was disclosed. In conjunction with NaI as catholyte and nickel hexacyanoferrate as the catholyte capacity booster, a single‐molecule redox‐targeting reaction‐based full cell with energy density up to 39 Wh L^?1 was demonstrated.     

Organocatalytic asymmetric conjugate addition to allenic esters and ketones

The first example of an organocatalytic enantioselective conjugate addition of cyclic beta-ketoesters and glycine imine derivatives to electron-deficient allenes is described. We disclose that the corresponding chiral beta,gamma-unsaturated carbonyl compounds are formed exclusively under phase-transfer conditions using either cinchona-alkaloid-derived or biphenyl-based chiral quaternary ammonium salts as catalysts. The scope of the reaction for beta-ketoesters is outlined for allenes having a ketone or ester motif as electron-withdrawing group as well as different substituents in the 3-position, giving the optically active products in high yields and excellent diastereo- and enantioselectivities (90-96% ee). The conjugate addition also proceeds for a number of cyclic beta-ketoesters having different ring sizes, ring systems, and substituents in high yields and enantioselectivities. Glycine imine derivatives also undergo the asymmetric conjugate addition to electron-deficient allenes in high yields and with enantioselectivities in the range of 60-88% ee, thus providing a rapid entry to optically active alpha-vinyl-substituted alpha-amino acid derivatives. It is shown that the enantioselectivity is strongly dependent on the size of the ester moiety of the nucleophile in combination with the catalytic system used. The high synthetic value of the chiral products arising from these new catalytic processes is demonstrated by two straightforward transformations leading in one case to optically active hexahydrobenzopyranones and in the other to substituted pyroglutamates (gamma-lactames).