Numerical study of the effect of turbulence on rate of reactions in the MILD combustion regime

In this paper, the importance of fluctuations in flow field parameters is studied under MILD combustion conditions. In this way, a turbulent non-premixed CH₄+H₂ jet flame issuing into a hot and deficient co-flow air is modeled using the RANS Axisymmetric equations. The modeling is carried out using the EDC model to describe the turbulence-chemistry interaction. The DRM-22 reduced mechanism and the GRI2.11 full mechanism are used to represent the chemical reactions of H₂/methane jet flame. Results illustrate that although the fluctuations in temperature field are small and the reaction zone volume are large in the MILD regime, the fluctuations in temperature and species concentrations are still effective on the flow field. Also, inappropriate dealing with the turbulence effect on chemistry leads to errors in prediction of temperature up to 15% in the present flame. By decreasing of O₂ concentration of hot co-flow air, the effect of fluctuations in flow field parameters on flame characteristics are still significant and its effect on species reaction rates does not decrease. On the other hand, although decreasing of jet inlet Reynolds number at constant inlet turbulence intensity addresses to smaller fluctuations in flow filed, it does not lead to lower the effect of turbulence on species distribution and temperature field under MILD combustion conditions.     

An Evolutionary Approach to Optimizing Teleportation Cost in Distributed Quantum Computation

International Journal of Theoretical Physics - Distributed quantum computing has been well-known for many years as a system composed of a number of small-capacity quantum circuits. Limitations in...     

The microwave spectrum and conformation of bromomethyl cyclopropane

The microwave spectrum of gaseous bromomethyl cyclopropane

is reported in the range 12 to 36 GHz. Lines of the ⁷⁹Br and ⁸¹Br species of cis and gauche forms are assigned and partial r₀-structures derived. The rotational constants in MHz are: gauche C₃H₅CH₂⁷⁹Br, A = 11 469.285, B = 1 374.777, C = 1 295.394; gauche C₃H₅CH₂⁸¹Br, A = 11 400.100, B = 1 364.088, C = 1 283.952; cis C₃H₅CH₂⁷⁹Br, A = 8 759.918, B = 1 597.413, C = 1 522.141; cis C₃H₅CH₂⁸¹Br, A = 8 716.552, B = 1 583.761, C = 1 509.017.     

A new direction in design and manufacture of co-sensitized dye solar cells: Toward concurrent optimization of power conversion efficiency and durability

A novel methodology was implemented in the present study to concurrently control power conversion efficiency (η) and durability (D) of co-sensitized dye solar cells. Applying response surface methodology (RSM) and Desirability Function (DF), the main influential assembling (dye volume ratio and anti-aggregation agent concentration) and operational (performance temperature) parameters were systematically changed to probe their main and interactive effects on the η and D responses. Individual optimization based on RSM elucidated that D can be solely controlled by changing the ratio of vat-based organic photosensitizers, whereas η takes both effects of dye volume ratio and anti-aggregation concentration into account. Among the studied factors, the performance temperature played the most vital role in η and D regulation. In particular, however, multi-objective optimization by DF explored the degree to which one should be careful about manipulation of assembling and operational parameters in the way maximization of performance of a co-sensitized dye solar cell.     

Designing different nanomagnets via delocalization of cobalt magnetic moment inside narrow single walled carbon nanotubes

Density functional theory calculations were employed to study the effects of chirality and diameter of single walled carbon nanotubes (SWCNTs) on electronic, structural and magnetic properties of cobalt-doped (9,0), (5,5) and (5,0) nanotube systems. The (9,0) and (5,5) SWCNTs have similar diameters but different chiralities, whereas the (5,0) tube has a very small diameter. The Co-SWCNT systems are considered with four different possible arrangements, three of which are stable and only substitution of the Co with one of the carbon atoms on the surface of the SWCNTs is an exemption. Although the quasi-metallic band gap of the (9,0) SWCNT is eliminated by the cobalt doping process, metallic features of the (5,5) and (5,0) nanotubes remain unchanged. On the other hand, delocalization of the cobalt’s magnetization and inducement of a noticeable magnetization to the tubes provide a vast area of possible total magnetizations for the Co-SWCNT systems. The results are applicable to spintronics and useful for designing other nanomagnetic systems.     

Temperature dependent electrophysical characteristics of GaAs-polymer composite varistors

A composition of GaAs-polymer tiny particles was pressed at a temperature of 130 °C and a pressure of 60 MPa and its current–voltage characteristic was studied. The result shows that the prepared disk has varistor behavior and can therefore be used to protect circuits from low overvoltage transients higher than 62 V. Temperature dependence of current-voltage characteristic and the electrical conductivity of the sample were investigated in the temperature range of 25–100 °C. It has been found that increase in temperature results in lower breakdown voltage and nonlinearity coefficient. At high temperatures, nonlinearity in the I–V characteristic of sample disappears and the conductivity becomes Ohmic in nature. The sample has hysteresis which decreases through increase in temperature. Annealing effect on leakage current and breakdown voltage was both investigated and analyzed using SEM micrographs. Finally, the electrical bandgap of the sample was measured.     

A Novel Naphthalene-Immobilized Nanoporous SBA-15 as a Highly Selective Optical Sensor for Detection of Fe<Superscript>3+</Superscript> in Water

A novel organic-inorganic hybrid optical sensor (SBA-NCO) was designed and synthesized through immobilization of isocyanatopropyl-triethoxysilane and 1-amino-naphthalene onto the surface of SBA-15 by post-grafting method. The characterization of materials using XRD, TEM, N₂ adsorption-desorption, and FT-IR techniques confirmed the successful attachment of organic moieties and preserving original structure of SBA-15 after modification step. Fluorescence experiments demonstrated that SBA-NCO was a highly selective optical sensor for the detection of Fe³⁺ directly in water over a wide range of metal cations including Na⁺, Mg²⁺, Al³⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ in a wide pH values.     

Systematic Study of Two-Quasi-Particle Structure of Odd–Odd Thulium Nuclei

Physics of Atomic Nuclei - In this study, the nuclear structure properties of $${}^{160{-}166}$$ Tm isotopes with neutron numbers 91, 93, 95, and 97 were investigated using the projected shell...     

Pure annihilation decay of strange beauty meson into two charm heavy mesons

In this study, the heavy to heavy decay of \begin{document}$ B^0_s\rightarrow D^{*+}D^- $\end{document} is evaluated through the factorization approach by using the final state interaction as an effective correction. Under the factorization approach, this decay mode occurs only through the annihilation process, so a small amount is produced. Feynman's rules state that six meson pairs can be assumed for the intermediate states before the final meson pairs are produced. By taking into account the effects of twelve final state interaction diagrams in the calculations, a significant correction is obtained. These effects correct the value of the branching ratio obtained by the pure factorization approach from \begin{document}$ (2.41\pm1.37)\times10^{-5} $\end{document} to \begin{document}$ (8.27\pm2.23)\times10^{-5} $\end{document}. The value obtained for the branching ratio of the \begin{document}$ B^0_s\rightarrow D^{*+}D^- $\end{document} decay is consistent with the experimental results.