Encapsulation of small fullerenes into nitrogenated holey nanotubes: a density functional theory study

Encapsulation of fullerene into nanotubes based on a C₂N sheet, known as nitrogenated holey graphene, was investigated using density functional theory. The structural and electronic properties of these carbon hybrid materials, consisting of nitrogenated holey nanotubes and a small C₂₀ fullerene, were studied. The formation energies showed that encapsulation of the fullerene into the nitrogenated holey nanotube is an exothermic process. To characterise the electronic properties, the electronic band structure and density of states of armchair and zigzag nitrogenated holey nanotubes were calculated. Filling these nanotubes with the C₂₀ fullerene resulted in a p-type semiconducting character. The energy band gap of the nitrogenated holey nanotubes decreased with fullerene encapsulation. The results are indicative of the possibility of band gap engineering by encapsulation of small fullerenes into nitrogenated holey nanotubes.     

Surface properties of nano-Al2O3 film and its application in the preparation of morphine electrochemical sensor

In this study, alumina nanoparticles and film were synthesized by sol–gel method and thermally grown. The chemical composition, morphology, and structural properties of the grain nanostructures of the nanoaggregate aluminum atoms on the silicon surface are characterized by X-ray diffraction, energy dispersive spectroscopy, and scanning electron microscopy techniques which show that the atomic ratio of Al and O elements is about 60:45 and the mass ratio is about 70:31. This point reveals that there is no intermediate layer between Al₂O₃ and the silicon substrate. In conclusion, this nanoparticle shows good electron conductivity at the surface of a carbon paste electrode that shows its ability in the preparation of a nanosensor in morphine analysis. The linear response range and detection limit were found to be 0.1–550 and 0.03 μmol L^?1, respectively. The proposed sensor was successfully applied for the determination of morphine in real samples such as human urine and drug.     

New nanocomposites containing metal nanoparticles, carbon nanotube and polymer

Metal-carbon nanotube-graft-polymer (MCNT-g-P) nanocomposites were synthesized and characterized successfully. In this work, multiwall carbon nanotubes (MWCNT) were opened using HNO₃/H₂SO₄ mixture and filled by metal nanoparticles such as silver nanoparticles through wet chemistry method. Then MWCNT containing metal nanoparticles were used as macroinitiator for ring opening polymerization of ε-caprolactone and MCNT-g-P nanocomposites were obtained. Length of grafted polymer arms onto the MWCNT was controlled using MWCNT/ε-caprolactone ratio. Structure and properties of nanocomposites were evaluated by TEM, DSC, TGA, and spectroscopy methods.     

Highly sensitive FRET-based fluorescence immunoassay for aflatoxin B1 using cadmium telluride quantum dots

We report on a competitive immunoassay for the determination of aflatoxin B1 using fluorescence resonance energy transfer (FRET) from anti-aflatoxin B1 antibody (immobilized on the shell of CdTe quantum dots) to Rhodamine 123 (Rho 123-labeled aflatoxin B1 bound to albumin). The highly specific immunoreaction between the antibody against aflatoxin B1 on the QDs and the labeled-aflatoxin B1 brings the Rho 123 fluorophore (acting as the acceptor) and the QDs (acting as the donor) in close spatial proximity and causes FRET to occur upon photoexcitation of the QDs. In the absence of unlabeled aflatoxin B1, the antigen-antibody complex is stable, and strong emission resulting from the FRET from QDs to labeled aflatoxin B1 is observed. In the presence of aflatoxin B1, it will compete with the labeled aflatoxin B1-albumin complex for binding to the antibody-QDs conjugate so that FRET will be increasingly suppressed. The reduction in the fluorescence intensity of the acceptor correlates well with the concentration of aflatoxin B1. The feasibility of the method was established by the detection of aflatoxin B1 in spiked human serum. There is a linear relationship between the increased fluorescence intensity of Rho 123 with increasing concentration of aflatoxin B1 in spike human serum, over the range of 0.1–0.6 μmol·mL^?1. The limit of detection is 2?×?10^?11 M. This homogeneous competitive detection scheme is simple, rapid and efficient, and does not require excessive washing and separation steps.

Novel palladium nanoparticles supported on β‐cyclodextrin@graphene oxide as magnetically recyclable catalyst for Suzuki–Miyaura cross‐coupling reaction with two different approaches in bio‐based solvents

A novel nanocatalyst was designed and prepared. Initially, the surface of magnetic graphene oxide (M‐GO) was modified using thionyl chloride, tris(hydroxymethyl)aminomethane and acryloyl chloride as linkers which provide reactive C═C bonds for the polymerization of vinylic monomers. Separately, β‐cyclodextrin (β‐CD) was treated with acryloyl chloride to provide a modified β‐CD. Then, in the presence methylenebisacrylamide as a cross‐linker, monomers of modified β‐CD and acrylamide were polymerized on the surface of the pre‐prepared M‐GO. Finally, palladium acetate and sodium borohydride were added to this composite to afford supported palladium nanoparticles. This fabricated nanocomposite was fully characterized using various techniques. The efficiency of this easily separable and reusable heterogeneous catalyst was successfully examined in Suzuki–Miyaura cross‐coupling reactions of aryl halides and boronic acid as well as in modified Suzuki–Miyaura cross‐coupling reactions of N‐acylsuccinimides and boronic acid in green media. The results showed that the nanocatalyst was efficient in coupling reactions for direct formation of the corresponding biphenyl as well as benzophenone derivatives in green media based on bio‐based solvents. In addition, the nanocatalyst was easily separable, using an external magnet, and could be reused several times without significant loss of activity under the optimum reaction conditions.     

A review to recent developments in modification of carbon fiber electrodes

The unique properties of carbon fiber electrodes (CFEs) offer a number of particular advantages for their use in analytical applications. However, some pretreatment is usually necessary for the modification of the carbon surface. One of these methods is enzyme modification, that enzyme reactions in the surface of the electrode can be useful for the certain determinations. Also application of nanoparticles is very useful for modification and gives very interesting responses for the electrode in the determination of various analytes. Electrochemical oxidation of a carbon surface is one of the other methods for modification. With this work the morphology of the surface changes as well as increasing the coverage by various oxygen-containing functional groups. These groups can then interact and bind with other species introduced to the surface. The modification of the surface of carbon fiber electrodes is an interesting topic with many applications in the fields of analytical chemistry, environmental and health science, fuel cell and biofuel cell and many others. In this review article we discussed about the various modification methods for carbon fiber electrodes and applications of these CFEs.     

Spectral,crystallographic, theoretical and antibacterial studies of palladium(II)/platinum(II) complexes with unsymmetric diphosphine ylides

The reaction of α‐keto‐stabilized diphosphine ylides [Ph₂P(CH₂)_nPPh₂═C(H)C(O)C₆H₄‐p‐CN] (n = 1 (Y¹); n = 2 (Y²)) with dibromo(1,5‐cyclooctadiene) palladium(II)/platinum(II) complexes, [Pd/PtBr₂(cod)], in equimolar ratio gave the new cyclometalated Pd(II) and Pt(II) complexes [Br₂Pd(κ²‐Y¹)] ( 1 ), [Br₂Pt(κ²‐Y¹)] ( 2 ), [Br₂Pd(κ²‐Y²)] ( 3 ) and [Br₂Pt(κ²‐Y²)] ( 4 ). These compounds were screened in a search for novel antibacterial agents and characterized successfully using Fourier transfer infrared and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. Also, the structures of complexes 1 and 2 were characterized using X‐ray crystallography. The results showed that the P,C‐chelated complexes 1 and 2 have structures consisting of five‐membered rings, while 3 and 4 have six‐membered rings, formed by coordination of the ligand through the phosphine group and the ylidic carbon atom to the metal centre. Also, a theoretical study of the structures of complexes 1 – 4 was conducted at the BP86/def2‐SVP level of theory. The nature of metal–ligand bonds in the complexes was investigated using energy decomposition analyses (EDA) and extended transition state combined with natural orbitals for chemical valence analyses. The results of EDA confirmed that the main portions of ΔE_int, about 57–58%, in the complexes are allocated to ΔE_elstat.     

A New Reaction of Isatin,Cyclic 1,3‐Diketone,and 2‐Cyanoacetamide: A Four‐Component Synthesis of Spirooxindoles

A novel reaction of isatins, 2‐cyanoacetamide, and cyclic 1,3‐diketones in ethanol was reported. The reaction gave the unexpected spirooxindole ethyl carboxylates in excellent yields and the spirooxindole carboxamide was not observed.     

Effect of humidity on the adsorption kinetics of lung surfactant at air-water interfaces

The in vitro adsorption kinetics of lung surfactant at air-water interfaces is affected by both the composition of the surfactant preparations and the conditions under which the assessment is conducted. Relevant experimental conditions are surfactant concentration, temperature, subphase pH, electrolyte concentration, humidity, and gas composition of the atmosphere exposed to the interface. The effect of humidity on the adsorption kinetics of a therapeutic lung surfactant preparation, bovine lipid extract surfactant (BLES), was studied by measuring the dynamic surface tension (DST). Axisymmetric drop shape analysis (ADSA) was used in conjunction with three different experimental methodologies, i.e., captive bubble (CB), pendant drop (PD), and constrained sessile drop (CSD), to measure the DST. The experimental results obtained from these three methodologies show that for 100% relative humidity (RH) at 37 degrees C the rate of adsorption of BLES at an air-water interface is substantially slower than for low humidity. It is also found that there is a difference in the rate of surface tension decrease measured from the PD and CB/CSD methods. These experimental results agree well with an adsorption model that considers the combined effects of entropic force, electrostatic interaction, and gravity. These findings have implications for the development and evaluation of new formulations for surfactant replacement therapy.