Removal of actinides and fission products activity from intermediate alkaline waste using inorganic exchangers

Hydrated iron oxide or amorphous-Fe₂O₃·3.5 H₂O (HFeO), hydrated titanium oxide (HTiO) and hydrated thorium oxide (HThO) were synthesized and their applicability for the decontamination of intermediate level liquid wastes (ILLW) was tested. The sorption of a few actinides like plutonium and americium on HFeO, ¹³⁷Cs and ¹⁰⁶Ru on HTiO and ⁹⁰Sr on HThO was investigated as a function of pH, time and loading capacity of the hydrous oxide with metal ions. The influence of the total dissolved salt content was also monitored. Some of these parameters influenced the sorption behavior significantly. The radiation stability of these inorganic sorbents were studied by irradiating them up to 48 Mrad. Adsorbed actinides and fission products were successfully eluted from HFeO and from the mix-bed of HTiO and HThO by 0.5M nitric acid.The authors wish to thank Shri R. D. Changarani, Chief Superintendent NRG Facilities and Shri P. K. Dey, Head FRD for their valuable advice and constant support.     

Removal of actinides and fission products activity from intermediate alkaline waste using inorganic exchangers

Hydrated iron oxide or amorphous-Fe₂O₃·3.5 H₂O (HFeO), hydrated titanium oxide (HTiO) and hydrated thorium oxide (HThO) were synthesized and their applicability for the decontamination of intermediate level liquid wastes (ILLW) was tested. The sorption of a few actinides like plutonium and americium on HFeO, ¹³⁷Cs and ¹⁰⁶Ru on HTiO and ⁹⁰Sr on HThO was investigated as a function of pH, time and loading capacity of the hydrous oxide with metal ions. The influence of the total dissolved salt content was also monitored. Some of these parameters influenced the sorption behavior significantly. The radiation stability of these inorganic sorbents were studied by irradiating them up to 48 Mrad. Adsorbed actinides and fission products were successfully eluted from HFeO and from the mix-bed of HTiO and HThO by 0.5M nitric acid.The authors wish to thank Shri R. D. Changarani, Chief Superintendent NRG Facilities and Shri P. K. Dey, Head FRD for their valuable advice and constant support.     

Multiple-electron transfer in a single step. Design and synthesis of highly charged cation-radical salts

[structure: see text]. Macromolecules 1c and 2c bearing multiple redox-active sites are synthesized by an efficient palladium-catalyzed coupling of 2,5-dimethoxytolylmagnesium bromide with readily available hexakis(4-bromophenyl)benzene and tetrakis(4-bromophenyl)methane. These macromolecular electron donors undergo reversible oxidation at a constant potential of 1.15 V vs SCE to yield robust, multiply charged cation radicals that are isolated in pure form using SbCl(5) as an oxidant. These nanometer-size cation-radical salts are shown to act as efficient "electron sponges" toward a variety of electron donors.     

Optimal allocation of replicas in parallel tempering simulations

We have studied the efficiency of parallel tempering simulations for a variety of systems including a coarse-grained protein, an atomistic model polypeptide, and the Lennard-Jones fluid. A scheme is proposed for the optimal allocation of temperatures in these simulations. The method is compared to the existing empirical approaches used for this purpose. Accuracy associated with the computed thermodynamic quantities such as specific heat is also computed and their dependence on the trial-exchange acceptance rate is reported.     

Vibrational spectroscopy of 3,4-difluorocyclobutenes: cis-d0, trans-d0 and trans-d4 species

Infrared and Raman spectra were recorded for cis-3,4-difluorocyclobutene (cDFCB) and trans-3,4-difluorocyclobutene-d4. Unscaled density functional theory (DFT) calculations of frequencies and intensities at the B3LYP/6-311++G(d,p) level supported the complete assignment of the vibrational fundamentals. The previous assignment of fundamentals of trans-3,4-difluorocyclobutene was revised. An unusual blue shift occurs for the methylenic CH-stretching frequencies of cis-3,4-difluorocyclobutene in going from the gas phase to the liquid phase. This hydrogen bond effect is related to similar observations recently reported and interpreted. The blue shift does not occur for the vinylic CH bonds of the cis isomer and does not occur for either type of CH bond in the trans isomer.     

Joule heating in packed capillaries used in capillary electrochromatography

Effective heat dissipation is critical for reproducible and efficient separations in electrically driven separation systems. Flow rate, retention kinetics, and analyte diffusion rates are some of the characteristics that are affected by variation in the temperature of the mobile phase inside the column. In this study, we examine the issue of Joule heating in packed capillary columns used in capillary electrochromatography (CEC). As almost all commonly used CEC packings are poor thermal conductors, it is assumed that the packing particles do not conduct heat and heat transfer is solely through the mobile phase flowing through the system. The electrical conductivity of various mobile phases was measured at different temperatures by a conductivity meter and the temperature coefficient for each mobile phase was calculated. This was followed by measurement of the electrical current at several applied voltages to calculate the conductivity of the solution within the column as a function of the applied voltage. An overall increase in the conductivity is attributed to Joule heating within the column, while a constant conductivity means good heat dissipation. A plot of conductivity versus applied voltage was used as the indicator of poor heat dissipation. Using theories that have been proposed earlier for modeling of Joule heating effects in capillary electrophoresis (CE), we estimated the temperature within CEC columns. Under mobile and stationary phase conditions typically used in CEC, heat dissipation was found to be not always efficient. Elevated temperatures within the columns in excess of 23 degrees C above ambient temperature were calculated for packed columns, and about 35 degrees C for an open column, under a given set of conditions. The results agree with recently published experimental findings with nuclear magnetic resonance (NMR) thermometry, and Raman spectroscopic measurements.     

Comparative Performance of Decoupled Input–Output Linearizing Controller and Linear Interpolation PID Controller: Enhancing Biomass and Ethanol Production in Saccharomyces cerevisiae

A decoupled input–output linearizing controller (DIOLC) was designed as an alternative advanced control strategy for controlling bioprocesses. Simulation studies of its implementation were carried out to control ethanol and biomass production in Saccharomyces cerevisiae and its performance was compared to that of a proportional–integral–derivative (PID) controller with parameters tuned according to a linear schedule. The overall performance of the DIOLC was better in the test experiments requiring the controllers to respond accurately to simultaneous changes in the trajectories of the substrate and dissolved oxygen concentration. It also exhibited better performance in perturbation experiments of the most significant parameters q _S,max, q _O2,max, and k _s , determined through a statistical design of experiments involving 730 simulations. DIOLC exhibited a superior ability of constraining the process when implemented in extreme metabolic regimes of high oxygen demand for maximizing biomass concentration and low oxygen demand for maximizing ethanol concentration.     

Electron transfer prompted ejection of a tightly bound K(+) from the ethereal cavity of a hexaarylbenzene-based receptor

[structure: see text]. Synthesis of a pair of rotamers (9u/9s) of a hexaarylbenzene derivative containing six (cofacially arranged) electroactive 2,5-dimethoxytolyl groups is described. The toroidal electronic stabilization due to the circular arrangement of aryl groups in 9u/9s leads to the observation of multiple (reversible) oxidation waves and lowering of their E(ox1) by approximately 250 mV relative to model compounds. The binding of K+ to symmetrical rotamer 9s was monitored by an electrochemical method and further confirmed by X-ray crystallography.     

A novel approach for protein identification from complex cell proteome using modified peptide mass fingerprinting algorithm

A unique peptide based search algorithm for identification of protein mixture using PMF is proposed. The proposed search algorithm utilizes binary search and heapsort programs to generate frequency chart depicting the unique peptides corresponding to all proteins in a proteome. The use of binary search program significantly reduces the time for frequency chart preparation to ～2 s for a proteome comprising ～23 000 proteins. The algorithm was applied to a three‐protein mixture identification, host cell protein (HCP) analysis, and a simulation‐generated data set. It was found that the algorithm could identify at least one unique peptide of a protein even in the presence of fourfold higher concentration of another protein. In addition, two HCPs that are known to be difficult to remove were missed by MS/MS approach and were exclusively identified using the presented algorithm. Thus, the proposed algorithm when used along with standard proteomic approaches present avenues for enhanced protein identification efficiency, particularly for applications such as HCP analysis in biopharmaceutical research, where identification of low‐abundance proteins are generally not achieved due to dynamic range limitations between the target product and HCPs.