On real matrices with positive definite symmetric component

Inequalities concerning real square matrices A with positive definite symmetric component A+A^*are derived from certain inertia relations which hold for any complex (not necessarily real) square matrices A with positive definite

A+A^*     

Effect of fluorine doping on highly transparent conductive spray deposited nanocrystalline tin oxide thin films

The undoped and fluorine doped thin films are synthesized by using cost-effective spray pyrolysis technique. The dependence of optical, structural and electrical properties of SnO₂ films, on the concentration of fluorine is reported. Optical absorption, X-ray diffraction, scanning electron microscope (SEM) and Hall effect studies have been performed on SnO₂:F (FTO) films coated on glass substrates. The film thickness varies from 800 to 1572 nm. X-ray diffraction pattern reveals the presence of cassiterite structure with (2 0 0) preferential orientation for FTO films. The crystallite size varies from 35 to 66 nm. SEM and AFM study reveals the surface of FTO to be made of nanocrystalline particles. The electrical study reveals that the films are degenerate and exhibit n-type electrical conductivity. The 20 wt% F doped film has a minimum resistivity of 3.8 × 10⁻⁴ Ω cm, carrier density of 24.9 × 10²⁰ cm⁻³ and mobility of 6.59 cm² V⁻¹ s⁻¹. The sprayed FTO film having minimum resistance of 3.42 Ω/cm², highest figure of merit of 6.18 × 10⁻² Ω⁻¹ at 550 nm and 96% IR reflectivity suggest, these films are useful as conducting layers in electrochromic and photovoltaic devices and also as the passive counter electrode.     

Photocatalytic activity of sea water using TiO₂ catalyst under solar light

Wastewater is generally released into the rivers and streams in developing countries. Industrial wastewater usually contains highly toxic pollutants, cyanides, chlorinated compounds. Ultraviolet (UV) radiation from sunlight also decomposes organic compounds by oxidation process. However, the process is less effective due to large amount of toxic effluent entering in the main stream of water. The solar radiation can effectively be applied to accelerate the process by using suitable catalyst for economically cleaning the water sources. This paper describes the photocatalytic degradation of the sea water using novel approach of photoelectrochemical (PEC) reactor module consisting of nine photoelectrochemical cells equipped with spray deposited TiO? catalysts under solar light. The resulted water samples were studied for physicochemical and bacteriological analysis. The complete mineralization of degraded sample was confirmed by total organic carbon (TOC) analysis, COD measurement and estimation of the formation of inorganic ions such as NH?(+), NO??, Cl? and SO2??. Microbiological examinations are performed to determine the bacterial analysis. This implies that photoelectrocatalysis could be a promising way for improving water quality in developing countries with low cost and clean energy reliable resource.     

Zinc oxide mediated heterogeneous photocatalytic degradation of organic species under solar radiation

The photocatalytic decomposition of eco-persistent toluene, salicylic acid and 4-chlorophenol with sun light in an oxygenated aqueous suspension has been studied under nanocrystalline hexagonal ZnO photocatalyst. The effect of substrate temperature onto the structural, morphological and photoactive properties has been investigated. The degradation of toluene, salicylic acid and 4-chlorophenol were achieved using a photoelectrochemical reactor module equipped with synthesized ZnO electrodes. Kinetic parameters have been investigated in terms of a first order rate equation. The rate constant (-k) for this heterogeneous photocatalysis was evaluated as a function of the initial concentration of original species. Substantial reduction in concentrations of toluene, salicylic acid and 4-chlorophenol was achieved as analyzed from COD and TOC studies. The mechanism for the degradation of toluene, salicylic acid and 4-chlorophenol could be explained on the basis of Langmuir-Hinshelwood mechanism.     

Properties of highly oriented spray-deposited fluorine-doped tin oxide thin films on glass substrates of different thickness

Transparent conducting thin films of fluorine-doped tin oxide (FTO) have been deposited onto the preheated glass substrates of different thickness by spray pyrolysis process using SnCl₄·5H₂O and NH₄F precursors. Substrate thickness is varied from 1 to 6 mm. The films are grown using mixed solvent with propane-2-ol as organic solvent and distilled water at optimized substrate temperature of 475 °C. Films of thickness up to 1525 nm are grown by a fine spray of the source solution using compressed air as a carrier gas. The films have been characterized by the techniques such as X-ray diffraction, optical absorption, van der Pauw technique, and Hall effect. The as-deposited films are preferentially oriented along the (2 0 0) plane and are of polycrystalline SnO₂ with a tetragonal crystal structure having the texture coefficient of 6.19 for the films deposited on 4 mm thick substrate. The lattice parameter values remain unchanged with the substrate thickness. The grain size varies between 38 and 48 nm. The films exhibit moderate optical transmission up to 70% at 550 nm. The figure of merit (φ) varies from 1.36×10⁻⁴ to 1.93×10⁻³ Ω⁻¹. The films are heavily doped, therefore degenerate and exhibit n-type electrical conductivity. The lowest sheet resistance (R_s) of 7.5 Ω is obtained for a typical sample deposited on 4 mm thick substrate. The resistivity (ρ) and carrier concentration (n_D) vary over 8.38×10⁻⁴ to 2.95×10⁻³ Ω cm and 4.03×10²⁰ to 2.69×10²¹ cm⁻³, respectively.     

High-performance UV detector based on Ga-doped zinc oxide thin films

High-quality ultraviolet photoconductive detectors have been fabricated using Ga-doped zinc oxide layers grown by spray pyrolysis on glass substrates. The performance of the photoconductivity has been tested by the measurements of the current-voltage (I-V) characteristics under forward and reverse bias. The devices have been characterized to investigate the effect of buffer layer on the detector performances. The behaviour of photocurrent with respect to optical power density, wavelength and chopping time has been investigated. We achieved the highest responsivity of about 1125 A/W at 5 V bias at 365 nm peak wavelength. Our approach provides a simple and cost-effective way to fabricate high-performance ‘visible-blind’ UV detectors.     

Nanoporous metal organic framework materials for hydrogen storage

Hydrogen is expected to play an important role in future transportation as a promising alternative clean energy source to carbon-based fuels.One of the key challenges to commercialize hydrogen energy is to develop appropriate onboard hydrogen storage systems,capable of charging and discharging large quantities of hydrogen with fast enough kinetics to meet commercial requirements.Metal organic framework (MOF) is a new type of inorganic and organic hybrid nanoporous particulate materials.Its diverse networks can enhance hydrogen storage through tuning the structure and property of MOFs.The MOF materials so far developed adsorb hydrogen through weak disperston interactions,which allow significant quantity of hydrogen to be stored at cryogenic temperatures with fast kinetics.Novel MOFs are being developed to strengthen the interactions between hydrogen and MOFs in order to store hydrogen under ambient conditions.This review surveys the development of such candidate materials,their performance and future research needs.