Compact passively q-switched Nd:YAG laser for 2D micromachining

We present a compact passively q-switched diode end pumped Nd:YAG laser at 1064 nm for 2D micromachining. It consists of a 5.5 cm long plano-concave end pumped resonator carrying a Cr:YAG passive q-switch inside the cavity. With an optical conversion efficiency of 46 and 33% the laser emits 1.4 W in CW and 986 mW in q-switched mode at a current of 2.5 A. After using a 2 mm circular aperture the output is seen in TEM₀₀ mode with a single pulse energy of 5 mJ. The laser produced circular holes of diameter 75 μm in 25 μm thick Tantalum foils. Actual results of 1D and 2D machining are shown along with the diffraction patters of the samples.     

Impedance spectroscopy and investigation of conduction mechanism in BaMnO3 nanorods

BaMnO₃ nanorods were synthesized at 200 °C and atmospheric pressure using the composite-hydroxide mediated method. X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy were used to investigate the structure, size, morphology, phase purity and elemental composition of BaMnO₃ nanorods. Electrical characterization of BaMnO₃ pellet was performed at 300-400 K and in the frequency range 200 Hz-2 MHz. Temperature dependence of AC conductivity suggests that the BaMnO₃ pellet behaves as a semiconducting material and conduction across the pellet can be explained by the correlated barrier hopping model. Impedance analysis was performed using the equivalent circuit model (R₁Q₁C₁)(R₂C₂) and it suggests a single relaxation process in the BaMnO₃ pellet at a particular temperature. The analysis reveals that the BaMnO₃ pellet behaves like an n-type semiconductor material due to the presence of oxygen vacancies and some disorder. Modulus spectroscopy also supports the impedance results.     

Measurements of electron density, temperature and photoionization cross sections of the excited states of neon in a discharge plasma

In the present work emission and absorption spectroscopy have been used to determine the plasma parameters of neon in a hollow cathode discharge lamp. The excitation temperature is determined using the intensity ratio method and Boltzmann's plot method whereas the electron density is determined from the Stark broadening of the spectral lines. The behavior of the optogalvanic signal as a function of laser energy has been studied for three transitions from the 2p⁵3s [1/2]₂ metastable state following ΔJ=ΔK=0, ±1 dipole selection rules. The saturation technique has been used to measure the photoionization cross section from three intermediate states 2p⁵3p′ [1/2]_1, 2p⁵3p′ [3/2]₂ and 2p⁵3p [5/2]₃ up to the 2p^{5 2}P_1/2 ionization threshold.     

Characterization of AZ91D Granules Covered with a Flux during In‐Situ Melting

Oxidation and melting behaviors of AZ91D granules throughout the in‐situ melting process using flux were investigated. The granules were heated under unprotected environment at four different temperatures between 650 and 800 °C, for the durations of 30 and 60 min. The products of heating process were characterized macroscopically and the oxides formed on the granules were examined using field emission scanning electron microscope, energy dispersive X‐ray spectroscopy and X‐ray diffraction analysis. Thermal analysis was used to reveal the response of the granules to heating during the in‐situ melting. The results showed that the granules experienced severe oxidation even in the presence of the flux, and significant amount of them changed to a powdered state due to oxidation and combustion, especially at 800 °C. It was discovered that the granules melted during heating; however, oxides formed on their surface encapsulated the molten metal and prevented the liquids from merging. The results also revealed that increasing heating temperature and time enhanced mold‐magnesium reaction resulted in the entrance of mold materials into the oxidation residues.     

Radiation-induced synthesis of RuO2 nanoparticles by thermal decomposition of Ru-tris-acetylacetonate

Pure-phase RuO₂ nanoparticles were obtained by thermal decomposition of unirradiated and γ-irradiated Ru-tris-acetylacetonate precursors. Several influencing factors including absorbed dose, calcination times and temperatures and addition of surfactants were thoroughly investigated. The newly synthesized RuO₂ nanoparticles were characterized by X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. The results showed that the best conditions for the preparation of mono-dispersed RuO₂ nanoparticles were achieved by calcinations of unirradiated Ru-tris-acetylacetonate for 6 h at 600°C. For γ-irradiated Ru-tris-acetylacetonate with 10² Gy total γ-ray doses, the optimal conditions for RuO₂ preparation were calcination for 2 h at 200°C. Thermal stability of RuO₂ nanoparticles was studied using thermogravimetric (TG) and differential thermal analysis (DTA) techniques, and the results were evaluated and discussed.     

Photodamage and Photoprotection: An In vivo Approach Using Noninvasive Probes

Solar radiations trigger the physiological alteration in skin which progress toward photoaging. Sunscreens are known to be effective against the photodamaging effects of sunlight. The purpose of this study was to evaluate the extent to which aging signs caused by real‐life sunlight exposure could be avoided by comparing various parameters between sun‐exposed and sun‐protected skin using noninvasive probes. Female volunteers (n = 11) after getting their consent were provided with marketed sunscreen product to apply onto their skin for 6 months. Measurements were scheduled every 15 days from the baseline reading for 6 months. Cutometer, Mexameter and Corneometer were used for evaluation of facial skin parameters. Clinical evaluations showed the effects of sunlight exposure on different skin parameters by comparing sun‐protected and unprotected skin, where Gross elasticity (R2), Net elasticity (R5), Viscoelasticity (R6) and Biological elasticity (R7) showed insignificant results, while Hydration, Melanin and Erythema showed significant results. Sun‐exposed skin presented 0.72%, 0.66%, 0.77%, 1.39%, 1.99%, 2.01% and 3.15% changes in R2, R5, R6 and R7, melanin, erythema and hydration, respectively, which were potentially prevented by sunscreen application. Premature aging is inhibited by following photoprotective regimen on routine basis, emphasizing the potential benefit of sunscreen against early aging signs.     

Flexible microfluidic cloth-based analytical devices using a low-cost wax patterning technique

This paper describes the fabrication of microfluidic cloth-based analytical devices (μCADs) using a simple wax patterning method on cotton cloth for performing colorimetric bioassays. Commercial cotton cloth fabric is proposed as a new inexpensive, lightweight, and flexible platform for fabricating two- (2D) and three-dimensional (3D) microfluidic systems. We demonstrated that the wicking property of the cotton microfluidic channel can be improved by scouring in soda ash (Na(2)CO(3)) solution which will remove the natural surface wax and expose the underlying texture of the cellulose fiber. After this treatment, we fabricated narrow hydrophilic channels with hydrophobic barriers made from patterned wax to define the 2D microfluidic devices. The designed pattern is carved on wax-impregnated paper, and subsequently transferred to attached cotton cloth by heat treatment. To further obtain 3D microfluidic devices having multiple layers of pattern, a single layer of wax patterned cloth can be folded along a predefined folding line and subsequently pressed using mechanical force. All the fabrication steps are simple and low cost since no special equipment is required. Diagnostic application of cloth-based devices is shown by the development of simple devices that wick and distribute microvolumes of simulated body fluids along the hydrophilic channels into reaction zones to react with analytical reagents. Colorimetric detection of bovine serum albumin (BSA) in artificial urine is carried out by direct visual observation of bromophenol blue (BPB) colour change in the reaction zones. Finally, we show the flexibility of the novel microfluidic platform by conducting a similar reaction in a bent pinned μCAD.     

Computational study on the effects of variable viscosity of micropolar liquids on heat transfer in a channel

Journal of Thermal Analysis and Calorimetry - A numerical model is developed to study the effects of temperature-dependent viscosity on heat transfer in magnetohydrodynamic flow of micropolar fluid...     

Experimental study on broadband radiofrequency electromagnetic radiations near cellular base stations: a novel perspective of public health

Journal of Thermal Analysis and Calorimetry - The purpose of this study is to measure and document the maximum level of broadband radiofrequency electromagnetic radiations in the vicinity of...