Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Synthesis and characterization of polyimides derived from (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides

A series of new polyimides were prepared via the polycondensation of (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides, that is, 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride. The structures of the polyimides were characterized by Fourier transform infrared and NMR measurements. The properties were evaluated by solubility tests, ultraviolet–visible analysis, differential scanning calorimetry, and thermogravimetric analysis. The two different meta‐position‐located amino groups with respect to the carbonyl bridge in the diamine monomer provided it with an unsymmetrical structure. This led to a restriction on the close packing of the resulting polymer chains and reduced interchain interactions, which contributed to the solubility increase. All the polyimides except that derived from BPDA had good solubility in strong aprotic solvents, such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfone, and in common organic solvents, such as cyclohexanone and chloroform. In addition, these polyimides exhibited high glass‐transition values and excellent thermal properties, with an initial thermal decomposition temperature above 470 °C and glass‐transition temperatures in the range of 280–320 °C. The polyimide films also exhibited good transparency in the visible‐light region, with transmittance higher than 80% at 450 nm and a cutoff wavelength lower than 370 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1291–1298, 2006     

Molar conductivity calculation of Li-ion battery electrolyte based on mode coupling theory

A method is proposed to calculate molar conductivity based on mode coupling theory in which the ion transference number is introduced into the theory. The molar conductivities of LiPF6, LiClO4, LiBF4, LiAsF6 in PC (propylene carbonate) are calculated based on this method. The results fit well to the literature data. This presents a potential way to calculate the conductivities of Li-ion battery electrolytes.     

Fluorescent sensors for the enantioselective recognition of mandelic acid: signal amplification by dendritic branching

Novel chiral bisbinaphthyl compounds have been synthesized for the enantioselective fluorescent recognition of mandelic acid. By introducing dendritic branches to the chiral receptor unit, the fluorescence signals of the receptors are significantly amplified because of the light-harvesting effect of the dendritic structure. This has greatly increased the sensitivity of the sensors in the fluorescent recognition. Study of the three generation sensors demonstrates that the generation zero sensor is the best choice for the recognition of mandelic acid because of its greatly increased fluorescence signal over the core and its high enantioselectivity. This sensor is potentially useful for the high throughput screening of chiral catalysts for the asymmetric synthesis of alpha-hydroxycarboxylic acids.     

气相色谱质谱法快速测定人血浆中克仑特罗

血浆样品经0.01mol·L-1盐酸和无水乙醇浸取,在碱性条件下用氯仿萃取,GG-MS-选择离子测量法测定,外标法定量。在选定的色谱条件下,盐酸克仑特罗的检出限为0.05ng,线性范围为0.1-100ng,方法的平均回收率为95.6％,RSD小于6.82％(n=6)。该法毋需衍生化,基质无干扰,简便可靠,适用于生物材料中克仑特罗的快速分析。     

Continuous electrophoretic separation of106Ru species in sea water and uptake of the separated fractions by sea algae

¹⁰⁶Ru chloro and nitrosyl-nitrato complexes in sea water were separated into several species by continuous electrophoresis on a filter paper curtain. Biological uptake experiments were carried out on sea algae Fucus virsoides with fractionated¹⁰⁶Ru chloro and nitrosyl-nitrato complex species in sea water. The biological uptake of¹⁰⁶Ru chloro complex species was about 8 times higher than the uptake of¹⁰⁶Ru nitrosyl-nitrato species. Electrophoretically most mobile electrically positively charged cationic species in both systems also showed about 8 times higher biological uptake than the most mobile negatively charged anionic species. A close relation of the biological uptake to the sign of the electrical charge and the electrophoretic mobility of the species is demonstrated. The results are discussed with respect to possible danger to the biological environment as a consequence of the aging of ruthenium species in sea water resulting from¹⁰⁶Ru waste disposal to the sea from a nuclear reprocessing plant. On leave of absence from the National Institute of Radiological Sciences, 9-1, 4-chome, Anagawa, Chiba-shi, Japan, on a fellowship from The Science and Technology Agency of the Japanese Govemment.     

Lipschitz estimates for generalized commutators of fractional integrals with rough kernel

Let (0 < α < n) be the generalized commutator generated by fractional integral with rough kernel and the m–th order remainder of the Taylor formula of a function A. In this paper, the (L^p, L^r) (r > 1) boundedness, the weak (L¹, L^{n/(n–α–β)}) boundedness and the (L^p, ?^{β, ∞}_p) boundedness of are discussed, when D^γA belongs to the Lipschitz function spaces.     

多维正态分布均值在序约束下的假设检验

在序限制下的统计推断是统计分析中的一个重要领域，保序回归理论在这个领域中起着关键性的作用。多维保序回归是一维保序回归的推广，本文给出了k=2,p=2时多维保序回归的求解方法。令Xij,j=1,2…，n是来自总体为二维正态分布N（μi，Λ)的样本，这是μi是未知的，Λ是已知的，i=1,2。令μ=（μ1,μ2)，-={（μ1,μ2)|μ1,μ∈R^2,}-0={(μ1,μ2)|μ1≤μ2,μ1，μ2∈R^2}。μ1≤μ2表示μ2-μ1的每一个分量为非负。本文也讨论了假设检验问题H0:μ∈-0,H1:μ∈-0=---0(H0是零假设）。     

Widely tunable, high-repetition-rate, dual signal-wave optical parametric oscillator by using two periodically poled crystals

This paper reports on a high-repetition-rate dual signal-wave (DSW) optical parametric oscillator (OPO) operating at the 1.5 μm band with tunable wavelength intervals from 2.5 nm to 69.1 nm. Two periodically poled crystals, a periodically poled lithium niobate (PPLN) with multiple gratings and a single grating MgO-doped PPLN (PPMgOLN), are cascaded in the same OPO cavity to generate dual signal-waves by using quasi-phase-matched (QPM) technique. The pump source was a Q-switched diode-pumped Nd:YVO₄ laser operating at 50 kHz. At an incident pump power of 3 W, an average output power of 169.6 mW at 1489.2 nm and 1558.3 nm has been achieved.