Mass transfer and benzene removal from air using latex rubber tubing and a hollow-fiber membrane module

A dense-phase latex rubber tube and a polyporous propylene hollow-fiber membrane module (HFMM) were investigated for control of benzene-contaminated gas streams. The abiotic mass flux observed through the latex tube was 3.9–13 mg/(min·m²) for 150 ppm of benzene at various gas and liquid flow rates, while a 100-fold lower mass flux was observed in the HFMM. After seeding with an aromatic-degrading culture enriched from activated sludge, the observed removal was 80% of 150 ppm, corresponding toa mass flux of 45 mg/(min·m²). The observed mass flux through the HFMM during biofiltration also rose, to 0.4 mg/(min·m²). Because the HFMM had a 50-fold higher surface area than the latex tube, the observed ben zene removal was 99.8%. Compared to conventional biofilters, the two reactors had modest elimination capacities, 2.5–18 g/(m³·h) in the latex tube membrane bioreactor and 4.8–58 g/(m³·h) in the HFMM. Although the HFMM had a higher elimination capacity, the gas-phase pressure drop was much greater.     

Silicone-modified starch/protein microparticles: protecting biopolymers with a hydrophobic coating

Silicone-coated starch/protein (human serum albumin, HSA) microparticles were prepared by precipitation of a starch/HSA/DMSO/water (water-in-oil) emulsion into acetone containing a silicone: the silicone polymer was either unfunctionalized (SiMe₃ terminated, PDMS) or functionalized at its termini with Si(OEt)₃ groups (TES-PDMS). The microparticles of approximate diameter 2–7 μm were highly hydrophobic with advancing contact angles 115°. Over several minutes, however, the contact angle decreased to ca. 40–70°. Soxhlet extraction with water led to degradation of the microparticles, irrespective of the nature of their silicone coating, as evidenced by release of the protein from them. Intraperitoneal (IP) or gastric administration of the two different particles to mice, however, showed a clear difference between the two silicones. The microparticles coated with either PDMS or TES-PDMS led to very different immune responses. Oral administration of the microparticles prepared with functionalized silicone elicited a significant production of antibodies, whereas the particles prepared with the unfunctionalized silicone (PDMS) were only weakly active. By contrast, the IP results demonstrated that particles coated with PDMS elicited an immune response that was established much more rapidly than with the particles modified with TES-PDMS. It is proposed that the TES-PDMS forms a physically adhering film or covalent bond to the protein molecules, which serves to protect the microparticle from biological degradation in the gut and/or facilitates the microparticle/protein interaction with the immune system.     

Antiferromagnetic three-dimensional order induced by carboxylate bridges in a two-dimensional network of [Cu3(dcp)2(H2O)4] trimers

A new Cu(II) complex, [Cu(3)(dcp)(2)(H(2)O)(4)](n), with the ligand 3,5-pyrazoledicarboxylic acid monohydrate (H(3)dcp) has been prepared by hydrothermal synthesis, and it crystallizes in the monoclinic space group P2(1)/c with a = 11.633(2) A, b = 9.6005(14) A, c = 6.9230(17) A, beta = 106.01(2) degrees, and Z = 2. In the solid state structure of [Cu(3)(dcp)(2)(H(2)O)(4)](n), trinuclear [Cu(3)(dcp)(2)(H(2)O)(4)] repeating units in which two dcp(3-) ligands chelate the three Cu(II) ions with the central Cu(II) ion, Cu(1) (on an inversion center), link to form infinite 2D sheets via syn-anti equatorial-equatorial carboxylate bridges between Cu(2) atoms in adjacent trimers. These layers are further linked by syn-anti axial-equatorial carboxylate bridging between Cu(1) atoms in adjacent sheets resulting in the formation of a crystallographic 3D network. A detailed analysis of the magnetic properties of [Cu(3)(dcp)(2)(H(2)O)(4)](n) reveals that the dcp(3-) ligand acts to link Cu(II) centers in three different ways with coupling constants orders of magnitude apart in value. In the high temperature region above 50 K, the dominant interaction is strongly antiferromagnetic (J/k(B) = -32 K) within the trimer units mediated by the pyrazolate bridges. Below 20 K, the trimer motif can be modeled as an S = 1/2 unit. These units are coupled to their neighbors by a ferromagnetic interaction mediated by the syn-anti equatorial-equatorial carboxylate bridge. This interaction has been estimated at J(2D)/k(B) = +2.8 K on the basis of a 2D square lattice Heisenberg model. Finally, below 3.2 K a weak antiferromagnetic coupling (J(3D)/k(B) = -0.1 K) which is mediated by the syn-anti axial-equatorial carboxylate bridges between the 2D layers becomes relevant to describe the magnetic (T, H) phase diagram of this material.     

Reactions of amines with a dimer of hexafluoropropene and with a perfluorovinyl sulfide prepared with hexafluoropropene

Some reactions of amines with a perfluorovinylsulfide, (CF₃)₂CFSC(CF₃)CFCF(CF₃)₂, prepared from hexafluoropropene (HFP) and sulfur [1] are compared to reactions of the same amines with the thermodynamic dimer of HFP, (CF₃)₂CCFCF₂CF₃. Many new ketenimines, eneamines, amidines, nitriles, and quinoline derivatives are reported.     

Synthesis and cross-coupling reactions of substituted 5-triflyloxyindoles

N-arylsulfonyl quinone monoimines undergo smooth cycloadditions in a [4+2] sense to yield the expected cycloadducts. The crude cycloadducts, when subjected to a short series of simple transformations, produce synthetically useful quantities of 5-triflyloxyindoles in excellent overall yields. Such compounds are excellent participants in cross-coupling chemistry.     

Quantum field theoretical methods in chemically bonded systems II

Summary Many-body perturbation theory is derived for chemical bonds. Paired quasiparticles represent the bonds. Products of the paired quasiparticles define a model Bardeen-Cooper-Schrieffer function. The pairing force is added as a model interaction to the self-consistent problem. The starting model is based on valency and adiabatic symmetry correlation. Symmetries are enforced by the model Hamiltonian. Perturbative corrections are expressed as ordinary Feynman diagrams. The number of diagrams needed is the same as for particle-hole theory.This work was supported in part by the U.S. Department of the Navy, Space and Naval Warfare Systems Command under Contract N00039-89-C-0001, and in part by NATO Research Grant 1861. It was presented, in part, at the A.C. Wahl Memorial Session, Molecular Spectroscopy Symposium, Columbus, Ohio, 1984; and Midwest Theoretical Chemistry Conference, Milwaukee, Wisconsin, 1985.     

Non-heme iron(II) complexes containing tripodal tetradentate nitrogen ligands and their application in alkane oxidation catalysis

A series of iron(II) bis(triflate) complexes containing tripodal tetradentate nitrogen ligands with pyridine and dimethylamine donors of the type [N(CH(2)Pyr)(3-n)()(CH(2)CH(2)NMe(2))(n)] [n = 0 (tpa, 1), n = 1 (iso-bpmen, 3), n = 2 (Me(4)-benpa, 4), n = 3 (Me(6)-tren, 5)] and the linear tetradentate ligand [(CH(2)Pyr)MeN(CH(2)CH(2))NMe(CH(2)Pyr), (bpmen, 2)] has been prepared. The preferred coordination geometry of these complexes in the solid state and in CH(2)Cl(2) solution changes from six- to five-coordinate in the order from 1 to 5. In acetonitrile, the triflate ligands of all complexes are readily displaced by acetonitrile ligands. The complex [Fe(1)(CH(3)CN)(2)](2+) is essentially low spin at room temperature, whereas ligands with fewer pyridine donors increase the preference for high-spin Fe(II). Both the number of pyridine donors and the spin state of the metal center strongly affect the intensity of a characteristic MLCT band around 400 nm. The catalytic properties of the complexes for the oxidation of alkanes have been evaluated, using cyclohexane as the substrate. Complexes containing ligands 1-3 are more active and selective catalysts, possibly operating via a metal-based oxidation mechanism, whereas complexes containing ligands 4 and 5 give rise to Fenton-type chemistry.     

The indirect spectrophotometric determination of the sulphate ion with 2-aminoperimidine

A new spectrophotometric determination of the sulphate ion is described which uses 2-aminoperimidine hydrochloride as a precipitating reagent. The excess of the reagent is measured at 305 nm. The procedure deals with sulphate in the range 4–120 p.p.m., and relies on simple calibration. The relative standard deviation for 50 p.p.m. of sulphate is 3.7%. The interference of 100 p.p.m. of phosphate, fluoride and nitrate is only slight in the determination of 50 p.p.m. of sulphate. The method is recommended for the determination of sulphate in rain and surface waters.