X‐Tream quality assurance in synchrotron X‐ray microbeam radiation therapy

Microbeam radiation therapy (MRT) is a novel irradiation technique for brain tumours treatment currently under development at the European Synchrotron Radiation Facility in Grenoble, France. The technique is based on the spatial fractionation of a highly brilliant synchrotron X‐ray beam into an array of microbeams using a multi‐slit collimator (MSC). After promising pre‐clinical results, veterinary trials have recently commenced requiring the need for dedicated quality assurance (QA) procedures. The quality of MRT treatment demands reproducible and precise spatial fractionation of the incoming synchrotron beam. The intensity profile of the microbeams must also be quickly and quantitatively characterized prior to each treatment for comparison with that used for input to the dose‐planning calculations. The Centre for Medical Radiation Physics (University of Wollongong, Australia) has developed an X‐ray treatment monitoring system (X‐Tream) which incorporates a high‐spatial‐resolution silicon strip detector (SSD) specifically designed for MRT. In‐air measurements of the horizontal profile of the intrinsic microbeam X‐ray field in order to determine the relative intensity of each microbeam are presented, and the alignment of the MSC is also assessed. The results show that the SSD is able to resolve individual microbeams which therefore provides invaluable QA of the horizontal field size and microbeam number and shape. They also demonstrate that the SSD used in the X‐Tream system is very sensitive to any small misalignment of the MSC. In order to allow as rapid QA as possible, a fast alignment procedure of the SSD based on X‐ray imaging with a low‐intensity low‐energy beam has been developed and is presented in this publication.     

Ultrafast and bias-free all-optical wavelength conversion using III-V-on-silicon technology

Using a 7.5 μm diameter disk fabricated with III-V-on-silicon fabrication technology, we demonstrate bias-free all-optical wavelength conversion for non-return-to-zero on-off keyed pseudorandom bit sequence (PRBS) data at the speed of 10 Gbits/s with an extinction ratio of more than 12 dB. The working principle of such a wavelength converter is based on free-carrier-induced refractive index modulation in a pump-probe configuration. We believe it to be the first bias-free on-chip demonstration of all-optical wavelength conversion using PRBS data. All-optical gating measurements in the pump-probe configuration with the same device have revealed that it is possible to achieve wavelength conversion beyond 20 Gbits/s.     

Linear algorithms for testing the sign stability of a matrix and for findingZ-maximum matchings in acyclic graphs

Summary Ann×n real matrixA=(a _ij ) isstable if each eigenvalue has negative real part, andsign stable (orqualitatively stable) if each matrix B with the same sign-pattern asA is stable, regardless of the magnitudes ofB's entries. Sign stability is of special interest whenA is associated with certain models from ecology or economics in which the actual magnitudes of thea _ij may be very difficult to determine. Using a characterization due to Quirk and Ruppert, and to Jeffries, an efficient algorithm is developed for testing the sign stability ofA. Its time-and-space-complexity are both 0(n ²), and whenA is properly presented that is reduced to 0(max{n, number of nonzero entries ofA}). Part of the algorithm involves maximum matchings, and that subject is treated for its own sake in two final sections.     

Underpotential surface reduction of mesoporous CeO<Subscript>2</Subscript> nanoparticle films

The formation of variable-thickness CeO₂ nanoparticle mesoporous films from a colloidal nanoparticle solution (approximately 1–3-nm-diameter CeO₂) is demonstrated using a layer-by-layer deposition process with small organic binder molecules such as cyclohexanehexacarboxylate and phytate. Film growth is characterised by scanning and transmission electron microscopies, X-ray scattering and quartz crystal microbalance techniques. The surface electrochemistry of CeO₂ films before and after calcination at 500 °C in air is investigated. A well-defined Ce(IV/III) redox process confined to the oxide surface is observed. Beyond a threshold potential, a new phosphate phase, presumably CePO₄, is formed during electrochemical reduction of CeO₂ in aqueous phosphate buffer solution. The voltammetric signal is sensitive to (1) thermal pre-treatment, (2) film thickness, (3) phosphate concentration and (4) pH. The reversible ‘underpotential reduction’ of CeO₂ is demonstrated at potentials positive of the threshold. A transition occurs from the reversible ‘underpotential region’ in which no phosphate phase is formed to the irreversible ‘overpotential region’ in which the formation of the cerium(III) phosphate phase is observed. The experimental results are rationalised based on surface reactivity and nucleation effects.     

Synthesis, photophysical, photochemical, and computational studies of coumarin-labeled nicotinamide derivatives

The syntheses and photophysical/photochemical properties of two amide-tethered coumarin-labeled nicotinamides are described. Photochemical studies of 6-bromo-7-hydroxycoumarin-4-ylmethylnicotinamide (BHC-nicotinamide) revealed an unexpected solvent effect. This result is rationalized by computational studies of the different protonation states using TD-DFT with the M06L/6-311+G** method with implicit and explicit solvation models. Molecular orbital energies responsible for the λ(max) excitation show that the functionalization of the coumarin ring results in a strong red-shift from 330 to 370 nm when the pH of solution is increased from 3.06 to 8.07. From this MO analysis, a model for solvent interactions has been proposed. The BHC-nicotinamide proved to be photochemically stable, which is also interpreted in terms of NBO calculations. The results provide a set of principles for the rational design of either photostable labeling reagents or photolabile cage compounds.     

Quantum algorithm for alchemical optimization in material design

The development of tailored materials for specific applications is an active field of research in chemistry, material science and drug discovery. The number of possible molecules obtainable from a set of atomic species grow exponentially with the size of the system, limiting the efficiency of classical sampling algorithms. On the other hand, quantum computers can provide an efficient solution to the sampling of the chemical compound space for the optimization of a given molecular property. In this work, we propose a quantum algorithm for addressing the material design problem with a favourable scaling. The core of this approach is the representation of the space of candidate structures as a linear superposition of all possible atomic compositions. The corresponding ‘alchemical’ Hamiltonian drives the optimization in both the atomic and electronic spaces leading to the selection of the best fitting molecule, which optimizes a given property of the system, e.g., the interaction with an external potential as in drug design. The quantum advantage resides in the efficient calculation of the electronic structure properties together with the sampling of the exponentially large chemical compound space. We demonstrate both in simulations and with IBM Quantum hardware the efficiency of our scheme and highlight the results in a few test cases. This preliminary study can serve as a basis for the development of further material design quantum algorithms for near-term quantum computers.

‘Alchemical’ quantum algorithm for the simultaneous optimisation of chemical composition and electronic structure for material design. By exploiting quantum mechanical principles this approach will boost drug discovery in the near future.     

Development of Sustainable Chemistry in Madagascar: Example of the Valuation of CNSL and the Use of Chromones as an Attractant for Mosquitoes

This article describes a part of the results obtained from the cooperation between the University of Lyon1 (France) and the University of Antananarivo (Madagascar). It shows (among others) that useful research can be carried out in developing countries of the tropics if their social, technical, and economic conditions are taken into account. The concepts and methods associated with so-called “green chemistry” are particularly appropriated for this purpose. To illustrate this approach, two examples are shown. The first deals with industrial ecology and concerns waste transformation from the production of cashew nut into an amphiphilic product, oxyacetic derivatives. This product was obtained with a high yield and in a single step reaction. It exhibited an important surfactant property similar to those of the main fossil-based ones but with a much lower ecological impact. The second talks about chemical ecology as an alternative to insecticides and used to control dangerous mosquito populations. New substituted chromones were synthesized and showed biological activities toward Aedes albopictus mosquito species. Strong repellent properties were recorded for some alkoxylated products if others had a significant attractant effect (Kairomone) depending on their stereochemistry and the length of the alkyl chain.     

An expedient preparation of Stryker's reagent

A convenient and efficient preparation of Stryker's reagent, [Ph₃PCuH]₆, under homogeneous conditions using silanes as the reducing agent is detailed. The reaction time can be reduced to 1-2 h, and high yields of Stryker's reagent can be routinely achieved. The same method has been extended to the synthesis of [Ph₃PCuD]₆ using Ph₂SiD₂.