Effect of Ag nanoparticle addition and ultrasonic treatment on a stable TiO2 nanofluid

Nanoparticles, when homogeneously dispersed in a base fluid, e.g. water, ethylene glycol etc. are commonly known as nanofluids. Nanofluids have gained attention in the scientific community for their enhanced thermal properties. One of the major problems in using nanofluids as a heat transfer medium for commercial applications is that, in most of the closed circuit industrial cooling processes, the cooling fluid has to be replaced after several cycles of cooling operation because of an increased presence of contaminants. If nanofluids were used as a coolant, it would be very hard to separate the nanoparticles from the waste fluid. The present work is aimed at the separation and recycling of nanoparticles from fluid waste by means of quick settling of titanium dioxide nanoparticles using silver nanoparticles along with ultrasonic treatment. It is observed that with increasing silver concentration and time of ultrasonication, the stability of the dispersion decreases. There is a value for both the silver concentration and ultrasonication time above which the settling time decreases drastically.     

Role of non-lamellar-forming lipid in promotion of liposomal fusion

Membrane fusion is an important process in a wide range of cellular and sub-cellular activities. It is evident that during the intermediate stages of fusion some transitory non-bilayer configurations must appear within the lipid moiety. Using fluorescence techniques, we have studied here the process of aggregation and fusion of liposomes made of lipids, namely 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC). When mixed together, the complete fusion between these two liposomes took around 44 h as both DPPC and DMPC favour lamellar configuration. When the mixture was incubated at 42°C the fusion process was completed after 23 h. But, when 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) was added in the liposomal matrix the time for fusion was reduced to 21 h for mixture without incubation and 17 h when the mixture was incubated. This indicates that DPPE having a tendency to assume non-lamellar conformation, promoted destabilisation of the lamellar conformation within the liposome which facilitated the fusion between two apposing bilayers.     

Temporal contrast improvement in chirped pulse amplification systems by a four-grating compressor and by spectral modifications

The quest for higher peak focused intensities and better temporal contrast drives one to improve the design of all possible stages of the chirped pulse amplification (CPA) system. In this paper, we have analyzed the role of dispersion and spectral profile on the temporal shape and contrast ratio of the output pulse of a CPA system. The simulations indicate that an initial sech² or a Gaussian pulse in the CPA system is best for a good contrast ratio. Incorporating a four-grating based pulse compressor in the CPA system improves the contrast as well as provides the flexibility to compensate the dispersion upto the fourth order. The simulations also detail the effect of spectral profile tailoring on the contrast ratio and peak power.     

The water‐promoted Diels–Alder reaction in quaternary ammonium salts

Prevailing classification of salts based on their effect in solubility and stability of proteins in aqueous solution predicts that tetraalkylammonium salts, guanidinium chloride (GnCl), LiClO₄ act as salting‐in (S/I) and LiCl, NaCl act as salting‐out (S/O) in aqueous conditions. In the same context the behaviour of GnCl, LiClO₄ and LiCl are contradictory in polar solvents like ethylene glycol and formamide. In these solvents, expected salt effect shows just opposite nature from their usual expectation. However, in the aqueous solution salts like tetraalkylammonium halide (R₄NX, R = alkyl group, X = Br group) behave like salting‐in salts. The physicochemical origin of the salting in effect of R₄NX type of salts has been discussed elaborately in the present work. The role of cations in terms of substitution of various alkyl groups on R₄NX has been systematically presented here on the basis of experimental kinetic and thermodynamic studies. The abnormal behaviour of R₄NX salts in aqueous solution has also been explained by the Setschenov equation (k_s) and Δμ_solvation values, which highlights their individual nature out of common properties of R₄NX. Copyright © 2015 John Wiley & Sons, Ltd.     

Strong lensing of a regular black hole with an electrodynamics source

In this paper we have investigated the gravitational lensing phenomenon in the strong field regime for a regular, charged, static black holes with non-linear electrodynamics source. We have obtained the angle of deflection and compared it to a Schwarzschild black hole and Reissner Nordström black hole with similar properties. We have also done a graphical study of the relativistic image positions and magnifications. We hope that this method may be useful in the detection of non-luminous bodies like this current black hole.     

Characterization of ZnO-SnO2 thin film composites prepared by pulsed laser deposition

Thin films of ZnO-SnO₂ composites have been deposited on Si(1 0 0) and glass substrates at 500 °C by pulsed laser ablation using different composite targets with ZnO amount varying between 1 and 50 wt%. The effect of increasing ZnO-content on electrical, optical and structural properties of the ZnO-SnO₂ films has been investigated. X-ray diffraction analysis indicates that the as-deposited ZnO-SnO₂ films can be both crystalline (for ZnO <1 wt%) and amorphous (for ZnO ≥ 10 wt%) in nature. Atomic force microscopy studies of the as-prepared composite films indicate that the surfaces are fairly smooth with rms roughness varying between 3.07 and 2.04 nm. The average optical transmittance of the as-deposited films in the visible range (400-800 nm), decreases from 90% to 72% for increasing ZnO concentration in the film. The band gap energy (E_g) seems to depend on the amount of ZnO addition, with the maximum obtained at 1 wt% ZnO. Assuming that the interband electron transition is direct, the optical band gap has been found to be in the range 3.24-3.69 eV for as-deposited composite films. The lowest electrical resistivity of 7.6 × 10⁻³ Ω cm has been achieved with the 25 wt% ZnO composite film deposited at 500 °C. The photoluminescence spectrum of the composite films shows a decrease in PL intensity with increasing ZnO concentration.