Multiplicity distributions inb →s gluon decays

The final states for the processb→sy have been extensively discussed in the literature. Similarly-detailed analyses for the caseb→s gluon have not been performed. Generally this process is searched for in 2-body decays such as B⁰→K⁺ π ^?. We present simple arguments to suggest that most of the time the quark-level process will give rise to final states with rather high multiplicities. Comments are made about the applicability of these results tob→d gluon and hadronicb→u decays.     

Local nondeterminism and local times for stable processes

Summary Our main theorem gives sufficient conditions for symmetric stable processes and fields to have a jointly continuous local time. The approach is through the L ^p representation for such processes. We develop a measure of dependence for vectors in a normed linear space and use that to analyze the probabilistic independence of the increments of a stable process. Local nondeterminism is defined for stable processes and shown to be equivalent to locally approximately independent increments. Sufficient conditions for several classes of stable processes to be local nondeterministic are given. These ideas are extended to multidimensional stable random fields and we prove existence of jointly continuous local times. The results extend most Gaussian results to their stable analogs.     

Analytical TEM examinations of CoPt-TiO2 perpendicular magnetic recording media.

For this analytical TEM study, nonmagnetic oxygen-rich boundaries were introduced into Co-Pt-alloy perpendicular recording media by cosputtering Co and Pt with TiO2. Increasing the TiO2 content resulted in changes to the microstructure and elemental distribution within grains and boundaries in these films. EFTEM imaging was used to generate composition maps spanning many tens of grains, thereby giving an overall depiction of the changes in elemental distribution occurring with increasing TiO2 content. Comparing EFTEM with spectrum-imaging maps created by high-resolution STEM with EDXS and EELS enabled both corroboration of EFTEM results and quantification of the chemical composition within individual grain boundary areas. The difficulty of interpreting data from EDXS for these extremely thin films is discussed. Increasing the TiO2 content of the media was found to create more uniformly wide Ti- and O-rich grain boundaries as well as Ti- and O-rich regions within grains.     

Relative Lewis basicities of six AI(ORF)4- superweak anions and the structures of LiA

The relative Lewis basicities of six Al(ORF)4- ions, Al[OC(CH3)(CF3)2]4-, Al(OC(CF3)3]4-, Al(OCPh(CF3)2]4-, Al[OC[4-C6H4(tBu)](CF3)2]4-, Al(OC(Cy)(CF3)2]4-, and Al(OCPh2(CF3)]4-, have been determined by measuring their relative coordinating abilities towards Li+ in dichloromethane. The relative Li- Lewis basicities of the Al(ORF)4- ions are linearly related to the aqueous pKa values of the corresponding parent HORF fluoroalcohols. The Lewis basicity of Al[OCH(CF3)2]4- could not be measured because two of these anions can coordinate to one Li+ cation. The structures of LiAl[OCH(CF3)2]4 and [1-Et-3-Me-1,3-C3H3N2][Li[Al[OCH(CF3)2)4]2] were determined.     

Surface activity of thymol: implications for an eventual pharmacological activity

In the present work, we studied the ability of thymol to affect the organization of model membranes and the activity of an intrinsic membrane protein, the GABA(A) receptor (GABA(A)-R). In this last aspect, we tried to elucidate if the action mechanism of this terpene at the molecular level, involves its binding to the receptor protein, changes in the organization of the receptor molecular environment, or both. The self-aggregation of thymol in water with a critical micellar concentration approximately = 4 microM and its ability to penetrate in monomolecular layers of soybean phosphatidylcholine (sPC) at the air-water interface, even at surface pressures above the equilibrium, lateral pressure of natural bilayers were demonstrated. Thymol affected the self-aggregation of Triton X-100 and the topology of sPC vesicles. It also increased the polarity of the membrane environment sensed by the electrochromic dye merocyanine. A dipolar moment of 1.341 Debye was calculated from its energy-minimized structure. Its effect on the binding of [3H]-flunitrazepam ([3H]-FNZ) to chick brain synaptosomal membranes changed qualitatively from a tendency to the inhibition to a clear activatory regime, up on changing the phase state of the terpene (from a monomeric to a self-aggregated state). Above its CMC, thymol increased the affinity of the binding of [3H]-FNZ (K(d-control)= 2.9, K(d-thymol)= 1.7 nM) without changing the receptor density (B(max-control)= 910, B(max-thymol)= 895 fmol/mg protein). The activatory effect of thymol on the binding of [ [3H]-FNZ was observed even in the presence of the allosteric activator gamma-aminobutyric acid (GABA) at a concentration of maximal activity, and was blocked by the GABA antagonist bicuculline. Changes in the dipolar arrangement and in the molecular packing of GABA(A)-R environment are discussed as possible mediators of the action mechanism of thymol.     

Efficient transesterification/acylation reactions mediated by N-heterocyclic carbene catalysts

Imidazol-2-ylidenes, a family of N-heterocyclic carbenes (NHC), are efficient catalysts in the transesterification involving numerous esters and alcohols. Low catalyst loadings of aryl- or alkyl-substituted NHC catalysts mediate the acylation of alcohols with enol acetates in short reaction times at room temperature. Commercially available and more difficult to cleave methyl esters react with primary alcohols in the presence of alkyl-substituted NHC to efficiently form the corresponding esters. While primary alcohols are selectively acylated over secondary alcohols with use of enol esters as acylating agents, methyl and ethyl esters can be employed as protective agents for secondary alcohols in the presence of the more active alkyl-substituted NHC catalysts. The NHC-catalyzed transesterification protocol was simplified by generating the imidazol-2-ylidene catalysts in situ.     

The stability of poly(m-carborane-siloxane) elastomers exposed to heat and gamma radiation

Poly(m-carboranyl-siloxane) elastomers containing a mixture of di-methyl- and methylphenyl-silyl units were synthesised using the ferric chloride catalysed condensation reaction between di-chloro-diorganosilane and bis(di-methylmethoxysilyl)-m-carborane. These elastomeric materials were originally developed to have greater stability to extreme thermal environments and retain tailorable physical and chemical properties relative to comparable non-carborane containing elastomers. Prepared samples were aged either by heating in air at elevated temperatures or by gamma irradiation from a ⁶⁰Co source. Multinuclear (¹H, ¹³C and ¹¹B) solid and solution state nuclear magnetic resonance (NMR) was used to assess degradation. This included measurements of segmental chain dynamics using a solid-echo pulse sequence reflecting changes in crosslink density and assessing changes to the carborane fragment by ¹¹B and ¹H Magic Angle Spinning (MAS) methods. Thermogravimetric measurements were also performed to assess thermal stability. Gamma radiation (to a dose of 1 MGy) was found to induce only a small degree of elastomer hardening as evidenced by a reduction in segmental chain dynamics. The carborane cage however, remained intact at these dose levels. Thermal degradation was observed to lead to oxidative crosslinking, the degree of which is dependent on temperature. At temperatures below 350 °C, only small changes in segmental dynamics were observed commensurate with only minor weight loss at this temperature. At temperatures above 350 °C, the degradation of the elastomer increased dramatically with decreased segmental dynamics and presumed partial oxidation of the carborane cage. The integrity of the m-carborane cage and the segmental dynamics were found to be significantly reduced at temperatures above 580 °C, in line with the known cage rearrangement temperature for icosahedral carboranes.     

The heats of reaction of phosphines and phosphites with toluene-molybdenum tricarbonyl. Importance of both steric and electronic factors in determining the Mo---PR3 bond strength

The heats of reaction of tolueneMo(CO)₃ with a series of phosphines and phosphites have been measured by solution calorimetry. The order of stability toward formation of fac-(PR₃)₃Mo(CO)₃ in THF solution is: P(OCH₃)₃s> PMe₃ > PⁿBu₃ > PMe₂Ph> PEt₃ > triphos> P(OPh)₃ > PMePh₂ > PPh₃ > PCl₃ and spans a range of 25 kcal/mol reflecting individual bond strength differences up to 8 kcal/mol. The bulky phosphines PCy₃ and P^tBu₃ react with tolueneMo(CO)₃ in THF, but 30–40 kcal/mol less heat is evolved in these reactions than with the other phosphines and phosphites. The coordinately unsaturated five-coordinate complexes (PR₃)₂Mo(CO)₃ are proposed as the reaction products. The importance of both steric and electronic factors in the Mo---P bond is discussed.