An AlGaN/GaN HEMT with reduced surface electric field and improved breakdown voltage

A reduced surface electric field in AlGaN/GaN high electron mobility transistor (HEMT) is investigated by employing a localized Mg-doped layer under the two-dimensional electron gas (2-DEG) channel as an electric field shaping layer. The electric field strength around the gate edge is effectively relieved and the surface electric field is distributed evenly as compared with those of HEMTs with conventional source-connected field plate and double field plate structures with the same device physical dimensions. Compared with the HEMTs with conventional source-connected field plate and double field plate, the HEMT with Mg-doped layer also shows that the breakdown location shifts from the surface of the gate edge to the bulk Mg-doped layer edge. By optimizing both the length of Mg-doped layer, L_m, and the doping concentration, a 5.5 times and 3 times the reduction in the peak electric field near the drain side gate edge is observed as compared with those of the HEMTs with source-connected field plate structure and double field plate structure, respectively. In a device with V_GS=-5 V, L_m=1.5 μm, a peak Mg doping concentration of 8× 10¹⁷ cm^-3 and a drift region length of 10 μm, the breakdown voltage is observed to increase from 560 V in a conventional device without field plate structure to over 900 V without any area overhead penalty.     

A new synthesis of lysophosphatidylcholines and related derivatives. Use of p-toluenesulfonate for hydroxyl group protection

A new stereoselective synthesis of lysophosphatidylcholines is reported. The synthesis is based upon (1) the use of 3-p-toluenesulfonyl-sn-glycerol to provide the stereocenter for construction of the optically active lysophospholipid molecule, (2) tetrahydropyranylation of the secondary alcohol function to achieve orthogonal protection of the sn-2- and sn-3-glycerol positions, and (3) elaboration of the phosphodiester headgroup using a 2-chloro-1,3,2-dioxaphospholane/trimethylamine sequence. In the course of developing the synthesis it has been discovered that methoxyacetate displacement of the sn-3-p-toluenesulfonate yields a reactive methoxyacetyl ester, which in turn can be selectively cleaved with methanol/tert-butylamine, while the ester group at the sn-1-position remains unaffected. The sequence has been shown to be suitable for preparation of spectroscopically labeled lysophosphatidylcholines. One of these compounds was readily converted to a double-labeled mixed-chain phosphatidylcholine applicable for real-time fluorescence resonance energy transfer (FRET) assay of lipolytic enzymes. In addition, the work led to new synthetic strategies based on chemoselective manipulation of the tosyl group in the presence of other base-labile groups such as FMOC derivatives that are often used for the protection of amino and hydroxyl groups in syntheses.     

Molybdenum (VI)‐functionalized UiO‐66 provides an efficient heterogeneous nanocatalyst in oxidation reactions

A novel heterogeneous nanocatalyst was established by supporting molybdenum (VI) on Zr₆ nodes in the structure of the well‐known UiO‐66 metal–organic framework (MOF). The structure of the UiO‐66 before and after Mo (VI) immobilization was confirmed with XRD, DR‐FTIR and UV–vis spectroscopy, and the presence and amount of Mo (VI) was identified by X‐ray photoelectron spectroscopy and inductively coupled plasma atomic emission spectroscopy. TEM imaging confirmed the absence of Mo clusters on the MOF surface, while SEM confirmed that the appearance of the MOF has not changed upon immobilizing the Mo (VI) catalyst. BET adsorption measurements were used to confirm the porosity of the catalyst. The catalytic activity of this heterogeneous catalyst was investigated in oxidation of sulfides with H₂O₂ in acetonitrile and oxidative desulfurization of dibenzothiophene. Easy work up, convenient and steady reuse and high activity and selectivity are prominent properties of this new hybrid material.     

Synthesis and Cytotoxic Evaluation of Novel 1,2,3‐Triazole‐4‐Linked (2E,6E)‐2‐Benzylidene‐6‐(4‐nitrobenzylidene)cyclohexanones

This work describes the synthesis of novel 1,2,3‐triazole‐4‐linked (2E,6E)‐2‐benzylidene‐6‐(4‐nitrobenzylidene)cyclo‐hexanones starting from cyclohexanone. 1‐(Cyclohex‐1‐en‐1‐yl)piperidine, the enamine from cyclohexanone and piperidine, reacted with 4‐nitrobenzaldehyde to obtain 2‐(4‐nitrobenzylidene)cyclohexanone. Condensation of the latter compound with (prop‐2‐yn‐1‐yloxy)benzaldehyde derivatives under acidic conditions gave (4‐nitrobenzylidene)‐[(prop‐2‐yn‐1‐yloxy)‐benzylidene]cyclohexanones. Finally, ‘click reaction’ of these derivatives and various organic azides led to the title compounds. All compounds were examined by MTT assay for cytotoxic activity in one human breast cancer cell line, MDA‐MB‐231.     

Femtosecond electronic relaxation of excited metalloporphyrins in the gas phase

A systematic study of the ultrafast decay of metalloporphyrins containing various transition metals with partially filled 3d shells and zinc (3d filled) is reported here after excitation in the second excited state of the system (Soret band). Both time-of-flight mass spectrometry and velocity map imaging have been used for detection. A general biexponential decay with a short time constant tau1 approximately 100 fs is observed for the transition metal porphyrins, followed by a tau2 approximately 1 ps time decay. This evolution is interpreted as a porphyrin-to-metal charge transfer, tau1, followed by a back transfer, tau2, which leads to an excited state (d,d*) localized on the metal. These conclusions stem from the different behaviors of zinc and the transition metal porphyrins. A porphyrin-to-metal charge transfer model is chosen to describe the relaxation mechanism, based upon the fact that transition metalloporphyrins can accept electrons on the metal site, in contrast to zinc porphyrins.     

Identification of a higher-order organozincate intermediate involved in Negishi cross-coupling reactions by mass spectrometry and NMR spectroscopy

Negishi cross-coupling reactions were analyzed in solution by mass spectrometry and NMR spectroscopy to identify both the effect of LiBr as an additive as well as the purpose of 3-dimethyl-2-imidazolidinone (DMI) as a co-solvent. The results suggest that the main role of DMI is to facilitate a higher order bromozincate formation during the addition of LiBr.     

Pd-catalyzed aryl amination mediated by well defined, N-heterocyclic carbene (NHC)-Pd precatalysts, PEPPSI

Pd-N-heterocyclic carbene (NHC)-catalyzed Buchwald-Hartwig amination protocols mediated by Pd-PEPPSI precatalysts is described. These protocols provide access to a range of hindered and functionalized drug-like aryl amines in high yield with both electron-deficient and electron-rich aryl- and heteroaryl chlorides and bromides. Variations in solvent polarity, base and temperature are tolerated, enhancing the scope and utility of this protocol. A mechanistic rationalization for base strength (pKb) requirements is also provided.     

A user-friendly, all-purpose Pd-NHC (NHC=N-heterocyclic carbene) precatalyst for the negishi reaction: a step towards a universal cross-coupling catalyst

We have developed the first user-friendly Negishi protocol capable of routinely cross-coupling all combinations of alkyl and aryl centers. The use of an easily synthesized, air stable, highly active, well-defined precatalyst PEPPSI-IPr (1; PEPPSI=pyridine-enhanced precatalyst preparation, stabilization and initiation; IPr=diisopropylphenylimidazolium derivative) substantially increases the scope, reliability, and ease-of-use of the Negishi reaction. All organohalides and routinely used pseudohalides were excellent coupling partners, with the use of chlorides, bromides, iodides, triflates, tosylates, and mesylates resulting in high yield of the coupled product. Furthermore, all reactions were performed by using general laboratory techniques, with no glove-box necessary as the precatalyst was weighed and stored in air. Utilization of this methodology allowed for the easy synthesis of an assortment of sterically encumbered biaryls and druglike heteroaromatics, demonstrating the value of the PEPPSI-IPr system. Furthermore, this is also the first time Pd-NHC (NHC=N-heterocyclic carbene) methodology has surpassed the related phosphine-ligated Negishi processes both in activity and use.