Strong oscillations in molecular valence photoemission intensities

Photoemission from the two outermost ionizations [highest occupied molecular orbitals (HOMO and HOMO-1)] of Mg(eta(5)-C(5)H(5))(2) has been studied with synchrotron radiation in the gas phase. Strong oscillations in the HOMO-1/HOMO ratio, qualitatively similar to those well-known for fullerenes, are found. Excellent agreement with the experimental ratio is provided by accurate cross section calculations both at the density-functional theory and time-dependent density-functional theory level, indicating that a many electron response has a minor role for this effect. A comparison with the calculated values for other metal sandwich compounds indicate that the presence of oscillations is a widespread phenomenon, and a potential source of interesting information on the structural and electronic properties of the target molecule.     

Organometallic ni pincer complexes for the electrocatalytic production of hydrogen

Nonplatinum metals are needed to perform cost-effective water reduction electrocatalysis to enable technological implementation of a proposed hydrogen economy. We describe electrocatalytic proton reduction and H(2) production by two organometallic nickel complexes with tridentate pincer ligands. The kinetics of H(2) production from voltammetry is consistent with an overall third order rate law: the reaction is second order in acid and first order in catalyst. Hydrogen production with 90-95% Faradaic yields was confirmed by gas analysis, and UV-vis spectroscopy suggests that the ligand remains bound to the catalyst over the course of the reaction. A computational study provides mechanistic insights into the proposed catalytic cycle. Furthermore, two proposed intermediates in the proton reduction cycle were isolated in a representative system and show a catalytic response akin to the parent compound.     

Hydrophobic cryogels for DNA adsorption: Effect of embedding of monosize microbeads into cryogel network on their adsorptive performances

As alternative hydrophobic adsorbent for DNA adsorption, supermacroporous cryogel disks were synthesized via free radical polymerization. In this study, we have prepared two kinds of cryogel disks: (i) poly(2‐hydroxyethyl methacrylate‐N‐methacryloyl‐l ‐tryptophan) [p(HEMA‐MATrp)] cryogel containing specific hydrophobic ligand MATrp; and (ii) monosize p(HEMA‐MATrp) particles synthesized via suspension polymerization embedded into p(HEMA) cryogel structure to obtain p(HEMA‐MATrp)/p(HEMA) composite cryogel disks. These cryogel disks containing hydrophobic functional group were characterized via swelling studies, Fourier transform infrared spectroscopy, elemental analysis, surface area measurements and scanning electron microscopy. DNA adsorption onto both p(HEMA‐MATrp) cryogel and p(HEMA‐MATrp)/p(HEMA) composite cryogels was investigated. Maximum adsorption of DNA on p(HEMA‐MATrp) cryogel was found to be 15 mg/g polymer. Otherwise, p(HEMA‐MATrp)/p(HEMA) composite cryogels significantly increased the DNA adsorption capacity to 38 mg/g polymer. Composite cryogels could be used repeatedly without significant loss on adsorption capacity after 10 repetitive adsorption–desorption cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Conversion of methanol to 2,2,3-trimethylbutane (triptane) over indium(III) iodide

InI3 is able to catalyze the conversion of methanol to a mixture of hydrocarbons at 200 degrees C with one highly branched alkane, 2,2,3-trimethylbutane (triptane), being obtained in high selectivity. The mechanism for InI3-catalyzed reactions appears to be basically the same as that proposed for the previously studied ZnI2-catalyzed system in which sequential methylation of olefins is followed by competing reactions of the resulting carbocation: proton loss to give the next olefin vs hydride transfer to give the corresponding alkane. Although the reaction conditions and typical triptane yields achievable with ZnI2 and InI3 are quite similar, the two systems behave rather differently in a number of important particulars, including significant differences between the detailed product distributions. Most of the differences in behavior can be ascribed to the stronger Lewis acidity of InI3, including the ability to activate some alkanes, the higher activity for methylation of arenes, and the fact that methanol conversion can be observed at somewhat lower temperatures with InI3 than with ZnI2.     

Modeling sequence scrambling and related phenomena in mixed-model production lines

In this paper we examine the various effects that workstations and rework loops with identical parallel processors and stochastic processing times have on the performance of a mixed-model production line. Of particular interest are issues related to sequence scrambling. In many production systems (especially those operating on just-in-time or in-line vehicle sequencing principles), the sequence of orders is selected carefully to optimize line efficiency while taking into account various line balancing and product spacing constraints. However, this sequence is often altered due to stochastic factors during production. This leads to significant economic consequences, due to either the degraded performance of the production line, or the added cost of restoring the sequence (via the use of systems such as mix banks or automated storage and retrieval systems). We develop analytical formulas to quantify both the extent of sequence scrambling caused by a station of the production line, and the effects of this scrambling on downstream performance. We also develop a detailed Markov chain model to analyze related issues regarding line stoppages and throughput. We demonstrate the usefulness of our methods on a range of illustrative numerical examples, and discuss the implications from a managerial point of view.     

Partial Pooling in Tandem Lines with Cooperation and Blocking

For a tandem line of finite, single-server queues operating under the production blocking mechanism, we study the effects of pooling several adjacent stations and the associated servers into a single station with a single team of servers. We assume that the servers are cross-trained (so that they can work at several different stations) and that two or more servers can cooperate on the same job. For such a system, we provide sufficient conditions on the service times and sizes of the input and output buffers at the pooled station under which pooling will decrease the departure time of each job from the system (and hence increase the system throughput). We also show that pooling decreases the total number of jobs in the system at any given time and the sojourn time of each job in the system if the departure time of each job from the system is decreased by pooling and there is an arrival stream at the first station. Moreover, we provide sufficient conditions under which pooling will improve the holding cost of each job in the system incurred before any given time, and extend our results to closed tandem lines and to queueing networks with either a more general blocking mechanism or probabilistic routing. Finally, we present a numerical study aimed at quantifying the improvements in system performance obtained through pooling and at understanding which stations should be pooled to achieve the maximum benefit. Our results suggest that the improvements gained by pooling may be substantial and that the bottleneck station should be among the pooled stations in order to obtain the greatest benefit. AMS subject classification: 90B22     

Bilinear optimality constraints for the cone of positive polynomials

For a proper cone \({{\mathcal K}\subset\mathbb{R}^n}\) and its dual cone \({{\mathcal K}^*}\) the complementary slackness condition \({\langle{\rm {\bf x}},{\rm {\bf s}}\rangle=0}\) defines an n-dimensional manifold \({C({\mathcal K})}\) in the space \({{\mathbb R}^{2n}}\) . When \({{\mathcal K}}\) is a symmetric cone, points in \({C({\mathcal K})}\) must satisfy at least n linearly independent bilinear identities. This fact proves to be useful when optimizing over such cones, therefore it is natural to look for similar bilinear relations for non-symmetric cones. In this paper we define the bilinearity rank of a cone, which is the number of linearly independent bilinear identities valid for points in \({C({\mathcal K})}\) . We examine several well-known cones, in particular the cone of positive polynomials \({{\mathcal P}_{2n+1}}\) and its dual, and show that there are exactly four linearly independent bilinear identities which hold for all \({({\rm {\bf x}},{\rm {\bf s}})\in C({\mathcal P}_{2n+1})}\), regardless of the dimension of the cones. For nonnegative polynomials over an interval or half-line there are only two linearly independent bilinear identities. These results are extended to trigonometric and exponential polynomials. We prove similar results for Müntz polynomials.     

A Hermite collocation method for the approximate solutions of high‐order linear Fredholm integro‐differential equations

In this study, a Hermite matrix method is presented to solve high‐order linear Fredholm integro‐differential equations with variable coefficients under the mixed conditions in terms of the Hermite polynomials. The proposed method converts the equation and its conditions to matrix equations, which correspond to a system of linear algebraic equations with unknown Hermite coefficients, by means of collocation points on a finite interval. Then, by solving the matrix equation, the Hermite coefficients and the polynomial approach are obtained. Also, examples that illustrate the pertinent features of the method are presented; the accuracy of the solutions and the error analysis are performed. © 2010 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 27: 1707–1721, 2011     

Scale-up and Sustainability Evaluation of Biopolymer Production from Citrus Waste Offering Carbon Capture and Utilisation Pathway

Poly(limonene carbonate) (PLC) has been highlighted as an attractive substitute to petroleum derived plastics, due to its utilisation of CO₂ and bio-based limonene as feedstocks, offering an effective carbon capture and utilisation pathway. Our study investigates the techno-economic viability and environmental sustainability of a novel process to produce PLC from citrus waste derived limonene, coupled with an anaerobic digestion process to enable energy cogeneration and waste recovery maximisation. Computational process design was integrated with a life cycle assessment to identify the sustainability improvement opportunities. PLC production was found to be economically viable, assuming sufficient citrus waste is supplied to the process, and environmentally preferable to polystyrene (PS) in various impact categories including climate change. However, it exhibited greater environmental burdens than PS across other impact categories, although the environmental performance could be improved with a waste recovery system, at the cost of a process design shift towards energy generation. Finally, our study quantified the potential contribution of PLC to mitigating the escape of atmospheric CO₂ concentration from the planetary boundary. We emphasise the importance of a holistic approach to process design and highlight the potential impacts of biopolymers, which is instrumental in solving environmental problems facing the plastic industry and building a sustainable circular economy.     

Molecularly Imprinted Supermacroporous Cryogels for Myoglobin Recognition

Myoglobin is a primary iron, and oxygen-binding protein of muscle tissues and levels can be an important diagnostic biomarker for acute myocardial infarction, myocardial necrosis, or other cardiac diseases. The establishment of myoglobin recognition systems is important because of its protein’s structural and functional values in physiology, biochemistry, and diagnostic value in some damaged muscle tissue and cardiac diseases. For this purpose, we used molecular imprinting technique for myoglobin recognition from aqueous solutions and human plasma. In the first step, myoglobin-imprinted poly(hydroxyethyl methacrylate) (PHEMA) cryogels (MGb-MIP) were prepared, and optimum myoglobin adsorption conditions were determined. Selectivity experiments have been done with the competitive proteins, and myoglobin adsorption from IgG and albumin-free human plasma was studied. The purity of the desorbed samples was determined with SDS-PAGE. The desorption efficiency and reusability of the MGb-MIP cryogels were tested, and it was shown that without any significant loss in the adsorption capacity, MGb-MIP cryogels can be used a number of times for myoglobin recognition and separation.