An optical fibre pH sensor based on dye doped mesostructured silica

This paper describes the synthesis and optical pH sensing properties of a pH indicator dye activated mesostructured silica coated optical fibre. The pH-sensitive dye bromothymol blue was incorporated into the mesostructure sol precursor and thin films/coatings were used for pH-sensing applications without prior removal of the surfactant. The pH sensitivity range and operating wavelength were analysed by absorption measurements on layer dip-coated on glass slides. The pH sensing properties of coated optical fibre were tested by evanescent wave method. Experiments were carried out by using a series of solutions of known pH. No leaching was observed (except at very high pH) and an excellent reversibility was obtained between pH=2 and 5.     

An efficient and simple aminobenzannulation reaction: pyrrolidine as a trigger for the synthesis of 1-amino-acridines

[reaction: see text] A new aminobenzannulation methodology has been developed and applied successfully to the synthesis of 1-amino-acridines. The key and last step goes through an enamine intermediate that was detected in some cases. When pyrrolidine and powdered 4 A molecular sieves were used, the enamine synthesis and the aminobenzannulation step took place subsequently, whereas for other secondary amines, neutral Al(2)O(3) or PtCl(2) catalysis was necessary.     

Structural characterization and hydrogen sorption properties of the Mg50Ni45Cr5 alloy

The Mg₅₀Ni₄₅Cr₅ alloy for hydrogen storage is prepared by mechanical alloying. First, using the X-ray diffraction (XRD) and the scanning electron microscopy (SEM) we examine the morphology and the structure of the substrate. The obtained results highlight the effectiveness of this alloy in loading hydrogen as it is a nanocrystalline and a ductile one. Second, we attempt to justify these expectations using the statistical physic, precisely the model monolayer with two levels of energy, in modeling a hydrogen absorption and desorption isotherms on Mg₅₀Ni₄₅Cr₅ alloy at four temperatures T?=?275?K, T?=?300?K, T?=?325?K and T?=?350?K. The model has six physicochemical parameters deduced from the fitting of the isotherms, they are divided by two categories of steric and energetic parameters. Thanks to these parameters we compare the absorption and desorption processes, in order to highlight the hysteresis phenomenon encountered during the hydrogen sorption.     

Optimal Control of an Evolution Problem Involving Time-Dependent Maximal Monotone Operators

Journal of Optimization Theory and Applications - We consider a control problem in a finite-dimensional setting, which consists in finding a minimizer for a standard functional defined by way of...     

Global solution to a generalized nonisothermal Ginzburg-Landau system

The article deals with a nonlinear generalized Ginzburg-Landau (Allen-Cahn) system of PDEs accounting for nonisothermal phase transition phenomena which was recently derived by A. Miranville and G. Schimperna: Nonisothermal phase separation based on a microforce balance, Discrete Contin. Dyn. Syst., Ser. B, 5 (2005), 753–768. The existence of solutions to a related Neumann-Robin problem is established in an N ⩽ 3- dimensional space setting. A fixed point procedure guarantees the existence of solutions locally in time. Next, Sobolev embeddings, interpolation inequalities, Moser iterations estimates and results on renormalized solutions for a parabolic equation with L ¹ data are used to handle a suitable a priori estimate which allows to extend our local solutions to the whole time interval. The uniqueness result is justified by proper contracting estimates.     

FDTD study of subwavelength imaging by a photonic crystal slab

The problem of subwavelength imaging via a photonic crystal slab lens made of two-dimensional (2D) square arrays of parallel dielectric cylinders in air is studied and discussed theoretically. The finite-difference time-domain method is employed to investigate the unique features of imaging by such lens. We confirm earlier findings that a photonic crystal slab lens can provide the imaging of a point source. By analysing the transmission properties of the proposed structure, we demonstrate that inside the all-angle negative refraction, there are some favourable directions for waves to travel. We show that the surface termination of the photonic crystal is a key parameter to obtain a good quality image. The super-resolution of two sources separated by a distance less than the wavelength is also considered. It is shown that the achievable resolution is limited by the slab length.     

Synthesis and structure of the unsymmetrical β-diimine precursor: The β-iminoamine

The reaction of benzoylacetone with ortho-substituted aniline derivatives gives the unsymmetrical β-iminoamine ligands (5–8) with high yields. A convenient synthesis is described. These compounds have been characterized by NMR and IR spectroscopies. The structure of the β-iminoamine 5, 3-N-(2,6-diisopropylphenylamino)-1-phenyl-1N-(2,6-diisopropylphenylimino)but-2-ene, was solved by X-ray diffraction methods.     

Mutagenic, antimutagenic and antioxidant activities of a new class of beta-glucoside hydroxyhydroquinone from Anagallis monelli growing in Tunisia

A new skeleton of an O-heteroside natural substance named zinolol, the first representative of a new class of aminated hydroxyhydroquinone, has been isolated from the whole plant Anagallis monelli. Its structure has been established by one and two dimensional NMR spectroscopic procedures. Antioxidant, mutagenic, antimutagenic activities were realised and positive results were recorded.     

Raman and FTIR spectroscopy applied to the conservation report of paleontological collections: identification of Raman and FTIR signatures of several iron sulfate species such as ferrinatrite and sideronatrite

Fossil materials that contain iron sulfide are well known for their instability when exposed to oxygen and humidity. This term however combines a great variety of materials showing different types of damages. Most of them consist of crystal efflorescence appearing on the surface and inside the matrix. In this work, a methodology was determined for the analysis of these damages by the use of Raman and infrared spectroscopy. The infrared and Raman signatures of a large set of iron sulfates were characterized. Specific attention was paid to sideronatrite and ferrinatrite, which are two associated sodium/iron(III) sulfates, and their infrared and Raman bands were partially assigned. Analysis performed on a selection of 11 damaged fossils showed a great variety of degradation products: besides one case that appeared to be a synthetic resin close to polyvinylchloride acetate, which was applied with a brush on the fossil surface, all degradation products belong to the sulfate group. However, many iron‐free sulfates, such as gypsum, halotrichite, epsomite, or pentahydrite were found, often in association with iron sulfates. In one case, despite the presence of iron in the matrix, no iron sulfate could be detected. This shows that the term ‘pyritic fossil’, commonly used by collection managers, is not appropriate as it oversimplifies the reality. A name such as ‘sulfide‐containing fossil’ would be more suitable. Copyright © 2012 John Wiley & Sons, Ltd.     

First-Principles Study on the Ferromagnetism of Mn-Doped LiZnAs Half-Heusler Compound

Physics of the Solid State - We have investigated the magnetic properties of Mn-doped LiZnAs half-Heusler compound using density functional simulations within the gradient generalized approximation...