Effects of Magnetic Nanofluid Fuel Combustion on the Performance and Emission Characteristics

Although the compression ignition engines are a significant source of power, their detrimental emissions create considerable problems to the environment as well as to humans. The objective of the present experimental investigation is to examine the effects of the magnetic nanofluid fuels on combustion performance characteristics and exhaust emissions. In this regard, the Fe₃O₄ nanoparticles dispersed in the diesel fuel with the nanoparticle concentrations of 0.4 and 0.8 vol% were employed for combustion in a single-cylinder, direct-injection diesel engine. After a series of experiments, it was demonstrated that the nanoparticle additives, even at very low concentrations, have considerable influence in diesel engine characteristics. Furthermore, the results indicated that the nanofluid fuel with nanoparticle concentration of 0.4 vol% shows better combustion characteristics in comparison with that of 0.8 vol%. Based on the experimental results, NO _x and SO₂ emissions dramatically reduce, while CO emissions and smoke opacity noticeably increase with increasing the dosing level of nanoparticles.     

A multiscale gradient-dependent plasticity model for size effects

The mechanical behaviour of polycrystalline material is closely correlated to grain size. In this study, we investigate the size-dependent phenomenon in multi-phase steels using a continuum dislocation dynamic model coupled with viscoplastic self-consistent model. We developed a dislocation-based strain gradient plasticity model and a stress gradient plasticity model, as well as a combined model, resulting in a theory that can predict size effect over a wide range of length scales. Results show that strain gradient plasticity and stress gradient plasticity are complementary rather than competing theories. The stress gradient model is dominant at the initial strain stage, and is much more effective for predicting yield strength than the strain gradient model. For larger deformations, the strain gradient model is dominant and more effective for predicting size-dependent hardening. The numerical results are compared with experimental data and it is found that they have the same trend for the yield stress. Furthermore, the effect of dislocation density at different strain stages is investigated, and the findings show that the Hall–Petch relation holds for the initial strain stage and breaks down for higher strain levels. Finally, a power law to describe the size effect and the transition zone between the strain gradient and stress gradient dominated regions is developed.     

On the Stability of a k-Cubic Functional Equation in Intuitionistic Fuzzy n-Normed Spaces

In this paper, we investigate some stability results concerning the k-cubic functional equation f(kx + y) + f(kx?y) = kf(x + y) + kf(x?y) + 2k(k²?1)f(x) in the intuitionistic fuzzy n-normed spaces.     

Investigation of Heisenberg algebra for a modified anti-de Sitter and modified antiSnyder models

In this paper,we consider a possible modification of the de Sitter and anti-de Sitter space for the extended uncertainty principle.For the modified anti-de Sitter model we discuss the representation and wave functions of the momentum operator for a one-dimensional box problem.Also,we consider modified Snyder and anti-Snyder models for the generalized uncertainty principle.Then,we assume the Hamiltonian with different potential and solve the Heisenberg algebra for the modified(anti)-de Sitter and(anti)-Snyder models in both position and in the momentum space.     

Geometry of Coadjoint Orbits and Multiplicity-one Branching Laws for Symmetric Pairs

Consider the restriction of an irreducible unitary representation π of a Lie group G to its subgroup H. Kirillov’s revolutionary idea on the orbit method suggests that the multiplicity of an irreducible H-module ν occurring in the restriction π|_H could be read from the coadjoint action of H on \(\mathcal {O}^{G} \cap \text {pr}^{-1}({\mathcal {O}}^{H})\), provided π and ν are ‘geometric quantizations’ of a G-coadjoint orbit \(\mathcal {O}^{G}\) and an H-coadjoint orbit \(\mathcal {O}^{H}\), respectively, where \(\text {pr} \colon \sqrt {-1}\mathfrak {g}^{\ast } \to \sqrt {-1}\mathfrak {h}^{\ast }\) is the projection dual to the inclusion \(\mathfrak {h} \subset \mathfrak {g}\) of Lie algebras. Such results were previously established by Kirillov, Corwin and Greenleaf for nilpotent Lie groups. In this article, we highlight specific elliptic orbits \(\mathcal {O}^{G}\) of a semisimple Lie group G corresponding to highest weight modules of scalar type. We prove that the Corwin–Greenleaf number \(\sharp (\mathcal {O}^{G} \cap \text {pr}^{-1}({\mathcal {O}}^{H}))/H\) is either zero or one for any H-coadjoint orbit \(\mathcal {O}^{H}\), whenever (G,H) is a symmetric pair of holomorphic type. Furthermore, we determine the coadjoint orbits \(\mathcal {O}^{H}\) with nonzero Corwin–Greenleaf number. Our results coincide with the prediction of the orbit philosophy, and can be seen as ‘classical limits’ of the multiplicity-free branching laws of holomorphic discrete series representations (Kobayashi [Progr. Math. 2007]).     

Chemical composition and antimicrobial activity of the essential oil of Anthemis altissima L. var. altissima

The essential oil obtained from the flowering parts of Anthemis altissima L. var. altissima was analysed by gas chromatography and gas chromatography mass spectroscopy. In this study, 34 compounds representing 98.76% of the essential oil were identified. The main components were α-terpineol (26.42%), β-pinene (9.23%), cis-chrysanthenyl acetate (6.30%), globulol (5.36%), n-tricosane (4.41%), terpinen-4-ol (4.08%) and 1,8 cineole (3.84%). Antibacterial activities of the essential oil and its two major components (α-terpineol and β-pinene) were determined using microdilution method against both Gram-positive (Staphylococcus aureus, Bacillus subtilis, Staphylococcus epidermidis) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae) bacteria. The essential oil showed a broad-spectrum antibacterial activity (MICs ranged from 3.13 to 6.25?μL?mL(-1)). It was found that α-terpineol with minimum inhibitory concentration (MIC) values of the range 0.87-1.56?μL?mL(-1) was a more potent antibacterial agent than β-pinene with MIC values of the range 1.56-6.25?μL?mL(-1). All of them, the essential oil, β-pinene and α-terpineol, were more effective against Gram-positive bacteria than Gram-negative ones.     

Synthesis of New 2-Aryl Substituted 2,3-Dihydroquinazoline-4(1H)-ones Under Solvent-Free Conditions,Using Molecular Iodine as a Mild and Efficient Catalyst

A simple, inexpensive, and efficient one-pot synthesis of 2,3-dihydroquinazoline-4(1H)-one derivatives under solvent-free conditions using a catalytic amount of iodine with excellent product yields is reported. This methodology provides easy, quantitative access to various 2,3-dihydroquinazoline-4(1H)-one derivatives, using commercially available iodine as a catalyst.     

CuI/Fe3O4 NPs@Biimidazole IL‐KCC‐1 as a leach proof nanocatalyst for the synthesis of imidazo[1,2‐a]pyridines in aqueous medium

In the present work, an innovative leach proof nanocatalyst based on dendritic fibrous nanosilica (DFNS) modified with ionic liquid loaded Fe₃O₄ NPs and CuI salts was designed and applied for the rapid synthesis of imidazo[1,2‐a]pyridines from the reaction of phenyl acetylene, 2‐aminopyridine, and aldehydes in aqueous medium. The structure of the synthesized nanocatalyst was studied by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transform infrared (FT‐IR), flame atomic absorption spectroscopy (FAAS), energy‐dispersive X‐ray (EDX), and X‐ray diffraction (XRD), vapor–liquid–solid (VLS), and adsorption/desorption analysis (Brunauer–Emmett–Teller [BET] equation) instrumental techniques. CuI/Fe₃O₄NPs@IL‐KCC‐1 with high surface area (225 m² g^?1) and porous structure not only exhibited excellent catalytic activity in aqueous media but also, with its good stability, simply recovered by an external magnet and recycled for eight cycles without significant loss in its intrinsic activity. Higher catalytic activity of CuI/Fe₃O₄NPs@IL‐KCC‐1 is due to exceptional dendritic fibrous structure of KCC‐1 and the ionic liquid groups that perform as strong anchors to the loaded magnetic nanoparticles (MNPs) and avoid leaching them from the pore of the nanocatalyst. Green reaction media, shorter reaction times, higher yields (71–97%), easy workup, and no need to use the chromatographic column are the advantages of the reported synthetic method.     

Electrochemical determination of naproxen in the presence of acetaminophen using a carbon paste electrode modified with activated carbon nanoparticles

In this study, cyclic voltammetry and differential pulse voltammetry were used to determine the electrochemical properties and concentration of naproxen in pharmaceutical formulation and human serum samples by using a carbon paste electrode modified with activated carbon nanoparticles. Optimum conditions were obtained at an electrode with 0.005 g activated carbon nanoparticles in a phosphate buffer solution of pH 6 as a supporting electrolyte. Linear calibration curves were obtained in the range of 0.1–120 μM, and the detection limit of naproxen determined was 0.0234 μM. The modified electrode shows good selectivity for naproxen in the presence of some organic and inorganic interferences and very good precision in real samples. Finally, naproxen was measured in the presence of acetaminophen.     

Green route for selective gram‐scale oxidation of sulfides using tungstate/triazine‐based ionic liquid immobilized on magnetic nanoparticles as a phase‐transfer heterogeneous catalyst

Tungstate ions were successfully loaded onto triazine‐based ionic liquid‐functionalized magnetic nanoparticles through an anion exchange process. The use of triazine core for creating ionic liquid led to the immobilization of high amounts of WO₄^2?. The resulting catalyst showed high activity and selectivity in the oxidation of sulfides to sulfoxides with H₂O₂ as a green oxidant at room temperature. In addition, due to the presence of ammonium groups in the catalyst structure, water dispersibility of the catalyst was increased. More important, the catalyst was magnetically recovered and reused for up to six runs without any marked decrease of activity and selectivity. Finally, easy gram‐scale oxidation of methylphenyl sulfide as well as fast separation of catalyst and product makes the protocol economical and industrially applicable.