Effect of pH on adsolubilization of single and binary organic solutes into a cationic hydrocarbon surfactant adsorbed layer on silica

The adsolubilization behaviors of 2-naphthol, biphenyl, and their binary solutes in the hexadecyltrimethyl ammonium bromide (HTAB) adsorbed layer formed on silica have been studied with solution pH. Two feed concentrations of HTAB are employed: 1.5 and 3.0 mmol dm(-3). At the feed concentration of 1.5 mmol dm(-3) HTAB, most of HTAB are adsorbed on the silica as a monolayer, while a bilayer formation occurs at the feed concentration of 3.0 mmol dm(-3). It is found that the adsolubilized amounts of respective single solutes increase with increasing solution pH except acidic region for biphenyl under a constant feed concentration of 2-naphthol (0.4 mmol dm(-3)) and biphenyl (0.047 mmol dm(-3)). The adsolubilization of binary solutes depends on the feed concentration of HTAB; at the low HTAB feed concentration, competitive adsolubilization between 2-naphthol and biphenyl occurs above pH 4.5, while at the high HTAB feed concentration the adsolubilization of biphenyl is enhanced by the incorporation of 2-naphthol over a whole pH region. These behaviors in the adsolubilization are discussed from the surfactant structure of HTAB adsorbed as well as the admicellar partitioning coefficients.     

Application of 28Mg to the kinetic study of Mg uptake by rice plants

The time course of Mg uptake and release using intact rice plants and ²⁸Mg as a tracer is presented. Since there is no conventional Mg tracer available, ²⁸Mg was produced via ²⁷Al(α, 3p)²⁸Mg reaction using a cyclotron. Using the purified ²⁸Mg tracer, it was found that the uptake amount of ²⁸Mg by the rice plants increased linearly during 30 min of application. After ²⁸Mg treatment for 90 min, the roots were sequentially washed with iced solution for 120 min. Within about 10 min, almost all of the ²⁸Mg, that was thought to be weakly bound to the apoplast, was washed away.     

Formation of Hierarchical Lamellae‐in‐Lamella Nanostructures from Polymer Blends Via Controlled Nonequilibrium Freezing

The creation of hierarchical nanostructures in polymeric materials has been intensively studied due to the great potential to tailor their physicochemical properties. Although much success has been achieved over the past decades in block copolymers, hierarchical structure engineering in polymer blends remains a great challenge. Here, the formation of hierarchical lamellae‐in‐lamella nanostructures from polymer blends via controlled nonequilibrium freezing is reported. Polymer blends are first dissolved in molten hexamethylbenzene (HMB) to form a homogeneous melt. When cooled to below its melting temperature, the HMB is crystallized and depleted, and the polymers are directionally solidified. This process is rapid enough that phase separation of the polymer blends is kinetically trapped at the nanoscale level. Then, the polymer blend epitaxially crystallizes onto the HMB inside the nanophase, resulting in the hierarchical lamellae‐in‐lamella structure. This structure is stable under ambient conditions and tunable depending on the annealing temperature and blending ratio.

     

High-Affinity Ratiometric Fluorescence Probe Based on 6-Amino-2,2′-Bipyridine Scaffold for Endogenous Zn2+ and Its Application to Living Cells

Zinc is an essential trace element involved in many biological activities; however, its functions are not fully understood. To elucidate the role of endogenous labile Zn²⁺, we developed a novel ratiometric fluorescence probe, 5-(4-methoxyphenyl)-4-(methylsulfanyl)-[2,2′-bipyridin]-6-amine (6 (rBpyZ)) based on the 6-amino-2,2′-bipyridine scaffold, which acts as both the chelating agent for Zn²⁺ and the fluorescent moiety. The methoxy group acted as an electron donor, enabling the intramolecular charge transfer state of 6 (rBpyZ), and a ratiometric fluorescence response consisting of a decrease at the emission wavelength of 438 nm and a corresponding increase at the emission wavelength of 465 nm was observed. The ratiometric probe 6 (rBpyZ) exhibited a nanomolar-level dissociation constant (K_d = 0.77 nM), a large Stokes shift (139 nm), and an excellent detection limit (0.10 nM) under physiological conditions. Moreover, fluorescence imaging using A549 human lung adenocarcinoma cells revealed that 6 (rBpyZ) had good cell membrane permeability and could clearly visualize endogenous labile Zn²⁺. These results suggest that the ratiometric fluorescence probe 6 (rBpyZ) has considerable potential as a valuable tool for understanding the role of Zn²⁺ in living systems.     

Effects of hydrophobic chain length on the characteristics of the micelles of octaoxyethylene tetradecyl C(14)E(8), hexadecyl C(16)E(8), and octadecyl C(18)E(8) ethers

Size, shape, and flexibility of micelles of octaoxyethylene tetradecyl C(14)E(8), hexadecyl C(16)E(8), and octadecyl C(18)E(8) ethers in dilute aqueous solutions were determined at finite surfactant concentrations c by static light scattering (SLS) and dynamic light scattering experiments at several temperatures T below the critical points. The SLS results were successfully analyzed with the aid of the thermodynamic theory formulated with wormlike spherocylinder model for SLS of micelle solutions. The analysis yielded the molar mass M(w) of the micelles as a function of c and the cross-sectional diameter d. The hydrodynamic radius R(H) and the radius of gyration S(2)(1/2) of the micelles as functions of M(w) were found to be also well-described by the corresponding theories for the wormlike spherocylinder or wormlike chain models. The results of the stiffness parameter lambda(-1) have revealed that the micelles are far from rigid rods but rather stiff compared with typical flexible polymers and they grow in size with increasing T to greater length for longer hydrophobic chains, i.e., alkyl groups of the surfactants. As the alkyl group becomes longer, the d value increased, while the spacings s between adjacent hexaoxyethylene chains on the micellar surface were found to remain substantially constant.     

Practical Synthesis of 2-Iodosobenzoic Acid (IBA) without Contamination by Hazardous 2-Iodoxybenzoic Acid (IBX) under Mild Conditions

We report a convenient and practical method for the preparation of nonexplosive cyclic hypervalent iodine(III) oxidants as efficient organocatalysts and reagents for various reactions using Oxone^® in aqueous solution under mild conditions at room temperature. The thus obtained 2-iodosobenzoic acids (IBAs) could be used as precursors of other cyclic organoiodine(III) derivatives by the solvolytic derivatization of the hydroxy group under mild conditions of 80 °C or lower temperature. These sequential procedures are highly reliable to selectively afford cyclic hypervalent iodine compounds in excellent yields without contamination by hazardous pentavalent iodine(III) compound.     

Disulfide‐Unit Conjugation Enables Ultrafast Cytosolic Internalization of Antisense DNA and siRNA

Development of intracellular delivery methods for antisense DNA and siRNA is important. Previously reported methods using liposomes or receptor‐ligands take several hours or more to deliver oligonucleotides to the cytoplasm due to their retention in endosomes. Oligonucleotides modified with low molecular weight disulfide units at a terminus reach the cytoplasm 10 minutes after administration to cultured cells. This rapid cytoplasmic internalization of disulfide‐modified oligonucleotides suggests the existence of an uptake pathway other than endocytosis. Mechanistic analysis revealed that the modified oligonucleotides are efficiently internalized into the cytoplasm through disulfide exchange reactions with the thiol groups on the cellular surface. This approach solves several critical problems with the currently available methods for enhancing cellular uptake of oligonucleotides and may be an effective approach in the medicinal application of antisense DNA and siRNA.     

Isolation of heptadepsin, a novel bacterial cyclic depsipeptide that inhibits lipopolysaccharide activity

Lipopolysaccharide (LPS) is considered to cause various inflammatory reactions. We searched among microbial secondary metabolites for compounds that could inhibit LPS-stimulated adhesion between human umbilical vein endothelial cells (HUVEC) and human myelocytic cell line HL-60 cells. In the course of our screening, we isolated a novel cyclic depsipeptide, which we named heptadepsin, from the whole culture broth of Paenibacillus sp. The addition of heptadepsin prior to LPS stimulation decreased HL-60 cell-HUVEC adhesion without showing any cytotoxicity. It also inhibited the cellular adhesion induced by lipid A, the active component of LPS, but it did not inhibit TNF-alpha or IL-1beta-induced cell adhesion. The result of surface plasmon resonance (SPR) analysis revealed that heptadepsin interacted with lipid A directly. Thus, heptadepsin, a novel naturally occurring cyclic heptadepsipeptide, was shown to inactivate LPS by direct interaction with LPS.     

Preparation of Co–Al and Ni–Al layered double hydroxide thin films by a sol–gel process with hot water treatment

Using hot water treatment of sol–gel derived precursor gel films, Co–Al and Ni–Al layered double hydroxide (LDH) thin films were prepared. The precursor gel films of Al₂O₃–CoO or Al₂O₃–NiO were prepared from cobalt or nickel nitrates and aluminum tri-sec-butoxide using the sol–gel method. Then, the precursor gel films were immersed in a NaOH aqueous solution of 100 °C. Nanocrystallites of Co–Al and Ni–Al LDH were precipitated with the hot water treatment with NaOH solution. The largest amounts of nanocrystals were obtained with a solution of pH = 10 for Co–Al LDH, and with that of pH = 9 for Ni–Al LDH. X-ray diffraction measurements confirmed that this process formed CO₃ ²⁻ intercalated LDHs. Both Co–Al and Ni–Al LDH thin films were confirmed to work as electrodes for electrochemical devices by cyclic voltammogram measurements.