The effect of high dose of gamma-irradiation on residual radicals concentration in ultra-high molecular weight polyethylene (UHMWPE) in the presence of vitamin E

Powder samples of UHMWPE (GUR 1020) containing 0.1% by wt. vitamin E (??-tocopherol, ??-T) were irradiated at room temperature in air for doses of 30-kGy, 65-kGy or 100-kGy (⁶⁰Co). After irradiation, they were stored at ?78.5°C (dry ice temperature) for one year and then opened to air at room temperature. Following the decay of the primary alkyl and allyl radicals (at room temperature in air), growth of the carbon-centered polyenyl R1 (?^·CH?CH=CH?, m ?? 3), and the oxygen-centered dior tri-enyl R2 (?^·OCH?CH=CH? _m , m ?? 3) residual radicals were measured for eight weeks. An X-band electron spin resonance (ESR) spectrometer was used for radical measurements. The initial relative radical concentrations (R2/R1) were found to be 10.13, 4.6 and 3.7 for the 65-kGy, 30-kGy and 100-kGy samples, respectively. R1 and R2 were both found to grow significantly in the 65-kGy samples while they grew only slightly in the 30-kGy and 100-kGy samples. In 65-kGy sample, R1 grew faster than R2 and the relative concentration R2/R1 was reduced from 10.13 to 2.9 for the 65-kGy sample while that for the 30-kGy and 100-kGy samples reduced only slightly, from 4.6 to 3.5 and 3.7 to 3.2, respectively. The behavior of the residual radicals can be explained by Raman spectroscopic data which suggest that the 65-kGy samples had a higher percentage of amorphous regions when compared to the 30-kGy or 100-kGy (21.7% compared to 15.7% or 17.9%) and also suggest a lower percentage of inter-phase regions (16.4% compared to 25.6% or 17.5%) and a lower level of structural disorder (0.26% compared to 0.44% or 0.27%).     

Solvent-free one-pot synthesis of 4-aryl-3,5-dimethyl-1,4,7,8-tetrahydrodipyrazolo[3,4-b:4′,3′-e]pyridines using Fe3O4@SiO2@(BuSO3H)3 catalytic Fe3+ system as selective colorimetric

Research on Chemical Intermediates - The synthesis of 4-Aryl-(3,5-dimethyl-1,4,7,8-tetrahydro-dipyrazolo[3,4b:4′,3′e]pyridine derivatives was accomplished using Fe3O4@SiO2@(BuSO3H)3...     

Template synthesis and spectroscopic studies of highly conjugated tetraiminetetraamide macrocyclic complexes from 1,2-diphenylethane-1,2-dione dihydrazone

A new class of tetraiminetetraamide macrocyclic (Ph4[20]tetraene, N8O4, and Ph6[20]tetraene, N8O4) complexes have been prepared through the metal ion controlled reaction of 1,2-diphenylethane-1,2-dione dihydrazone (DPEDDH) with succinic acid [ML1X2] or phthalic acid [ML2X2] [M=Mn, Co, Ni, Cu or Zn; X=Cl or NO3]. The structures of the complexes have been elucidated on the basis of i.r, 1H-n.m.r, e.p.r. and electronic spectral data and conductance, as well as magnetic, properties. An octahedral geometry is assigned for all the complexes, involving coordination of the all-imine nitrogens.     

Computer-aided molecular design of (E)-N-Aryl-2-ethene-sulfonamide analogues as microtubule targeted agents in prostate cancer

Microtubules are tube-shaped, filamentous and cytoskeletal proteins that are essential in all eukaryotic cells. Microtubule is an attractive and promising target for anticancer agents. In this study, three-dimensional quantitative structure activity relationships (3D-QSAR) including comparative molecular field analysis, CoMFA, and comparative molecular similarity indices analysis, CoMSIA, were performed on a set of 45 (E)-N-Aryl-2-ethene-sulfonamide analogues as microtubule-targeted anti-prostate cancer agents. Automated grid potential analysis, AutoGPA module in Molecular Operating Environment 2009.10 (MOE) as a new 3D-QSAR approach with the pharmacophore-based alignment was carried out on the same dataset. AutoGPA-based 3D-QSAR model yielded better prediction parameters than CoMFA and CoMSIA. Based on the contour maps generated from the models, some key features were identified in (E)-N-Aryl-2-arylethene-sulfonamide analogues that were responsible for the anti-cancer activity. Virtual screening was performed based on pharmacophore modeling and molecular docking to identify the new inhibitors from ZINC database. Seven top ranked compounds were found based on Gold score fitness function. In silico ADMET studies were performed on compounds retrieved from virtual screening in compliance with the standard ranges.     

Sensitive electrochemical DNA-based biosensors for the determination of Ag<Superscript>+</Superscript> and Hg<Superscript>2+</Superscript> ions and their application in analysis of amalgam filling

In the present paper, we used single-stranded poly-T (100% thymine bases) and poly-C (100% cytosine bases) nucleic acids as DNA probes for selective and sensitive individual electrochemical determination of Hg²⁺ and Ag⁺_, respectively, on the multi-walled carbon nanotube paste electrodes (MWCNTPEs) using [Fe(CN)₆]^3?/4? as electroactive labels. In the presence of Hg²⁺ and Ag⁺, the probe–Hg²⁺/Ag⁺ interactions through T–Hg²⁺–T and C–Ag⁺–C complexes formation could cause the formation of a unimolecular hybridized probe. This structure of probe led to its partial depletion from electrode surface and facilitation of electron transfer between [Fe(CN)₆]^3?/4? redox couple and electrode surface, resulting in the enhanced differential pulse voltammetry (DPV) oxidation current of [Fe(CN)₆]^3?/4? at the probe-modified electrode surface. We applied the difference in the oxidation peak currents of [Fe(CN)₆]^3?/4? before and after Hg²⁺/Ag⁺–DNA probe bonding (?I) for electrochemical determination of these heavy metal ions. Detection limits were 8.0?×?10^?12 M and 1.0?×?10^?11 M for Hg²⁺ and Ag⁺ ions determination, respectively. The biosensors were utilized to determine the weight percent of toxic metals, i.e., silver and mercury in dental amalgam filling composition. The results of their practical applicability in analysis of the amalgam sample were satisfactory.     

Thermodynamic study of complex formation process of free base meso-tetraphenylporphyrins with dimethyl and dibutyltin(IV) dichloride: a new algorithm for a single thermometric titration

A novel, fast and easy single sample measurement has been developed based upon temperature dependence of equilibrium constant in order to determine the enthalpy and entropy changes of a complexation reaction using spectrophotometric temperature titration. The method can be used in determination of the formation constant and thermodynamic parameters of the solutions that there are difficulties in their titration where volatile compounds are studying. Knowledge of component spectra is not required for the analysis. The formation constants of the interactions of ß-di and tri-brominated meso-tetraphenylporphyrins, and meso-tetrakis(4-methylphenyl) and (4-methoxyphenyl) porphyrins with Me₂SnCl₂ and Bu₂SnCl₂, have been determined in range of 0–25 °C utilizing van’t Hoff relation, mass balance and equilibrium constant equations by an iterative least squares method with ΔH ⁰ as adjustable parameter. The outputs of analysis are the equilibrium constants, ligand and adduct spectral profiles, their concentrations as a function of temperature, the adjusted values of the standard enthalpy ΔH ⁰, and entropy ΔS ⁰ changes. The order of formation constants of the resulting 1:1 complexes decreased with increasing number of bromide substituents and increased with adding methyl and methoxy groups, and vary as H₂T(4-CH₃O)PP > H₂T(4-CH₃)PP > H₂TPP > H₂TPPBr₂ > H₂TPPBr₃ and Me₂SnCl₂ > Bu₂SnCl₂.     

A New and Simple Electrocatalyst for Formaldehyde Oxidation; Nickel/poly(o‐Anisidine)/Film Modified Ionic Liquid Carbon Paste Electrode

In present work, the ionic liquid, 1‐butyl‐3‐methylimidazolium bis (trifluoromethylsulfonyl) imide was incorporated in the carbon paste electrode as the binder (IL‐CPE). O‐anisidine (OA) monomer is electropolymerized in the presence of an aqueous acidic solution onto IL‐CPE (POA/IL‐CPE). The as‐prepared substrate is used as a porous matrix for dispersion of Ni(II) ions by immersing the modified electrode in a nickel(II) nitrite solution. The modified electrodes are characterized by scanning electron microscopy (SEM) and electrochemical methods. The POA/IL‐CPE was applied successfully to highly efficient (current density of 18.2 mA cm^?2) electrocatalytic oxidation of formaldehyde in alkaline medium. Finally, the rate constant for chemical reaction between formaldehyde and redox sites of the electrode was calculated.     

Mono- and Di-valent Salts as Modifiers of PEO-PPO-PEO Block Copolymer Interactions with Silica Nanoparticles in Aqueous Dispersions

Colloidal stabilization of nanoparticle dispersions is central to applications including coatings, mineral extraction, and dispersion of oil spills in oceanic environments, which often involves oil-mineral-aggregates (OMAs). We have an ongoing interest in the modulation of amphiphile micellization and adsorption behavior in aqueous colloidal dispersions in the presence of various additives. Here we evaluate the effect of added salts CaCl₂, MgCl₂, and NaCl on the micellization and adsorption behavior of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer Pluronic P105 (EO₃₇PO₅₆EO₃₇). In 0.10 wt% silica nanoparticle (10.6 nm average diameter) dispersion, adsorbed block copolymer layer formation begins at a critical surface micelle concentration (csmc) of 0.02 wt%, well below the critical micellization concentration of Pluronic P105 in water. Dye solubilization experiments demonstrate an increase in the csmc upon addition of each salt. Each added salt reaches a level of maximum effectiveness in its ability to disfavor Pluronic P105 adsorption at the silica surface. These peak levels occur at concentrations of 0.005, 0.03, and 0.05 M for CaCl₂, MgCl₂, and NaCl, respectively, in the presence of 0.10 wt% silica nanoparticles. We explain these results in the context of an electrostatic displacer mechanism and discuss possible connections to OMA-dispersant formation.     

An ultrasensitive fluorescence sensor for determination of trace levels of copper in blood samples

A novel SBA-15-based fluorescent sensor, SBA-PI: mesoporous SBA-15 structure modified with iminostilbene groups, was designed, synthesized, and characterized by Fourier transform-infrared spectroscopy (FT-IR), ultraviolet–visible spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), low-angle X-ray diffraction techniques (low-angle XRD), and N₂ adsorption–desorption techniques. The SBA-PI as a sensor with a selective behavior for detection of Cu²⁺ comprises iminostilbene carbonyl as the fluorophore group. The SBA-PI sensor displays an excellent fluorescence response in aqueous solutions and the fluorescence intensity quenches remarkably upon addition of Cu²⁺. Other common interfering ions even at high concentration ratio showed either no or very small changes in the fluorescence intensity of SBA-PI in the absence of Cu²⁺. A limit of detection of 8.7 × 10⁻⁹ M for Cu²⁺ indicated that this fluorescence sensor has a high sensitivity and selectivity toward the target copper (II) ion. The fabricated Cu²⁺ sensor was successfully applied for the determination of the Cu²⁺ in human blood samples without any significant interference. With the selective analysis of Cu²⁺ ions down to 0.9 nM in blood, the sensor is a promising and a novel detection candidate for Cu²⁺ and can be applied in the clinical laboratory. A reversibility and accuracy in the fluorescence behavior of the sensor was found in the presence of I^¯ that was described as a masking agent for Cu²⁺.

Graphical abstract